Use query queues

BigQuery automatically determines the number of queries that can run concurrently, called the dynamic concurrency. Additional queries are queued until processing resources become available. This document explains how to control the maximum concurrency target, and set the queue timeout for interactive and batch queries.

Overview

BigQuery dynamically determines the number of queries that can run concurrently based on available compute resources. The number of queries that can run concurrently is calculated per on-demand project or per reservation. Additional queries are placed in a queue until there is enough capacity available to begin execution. The queue length is limited to 1,000 interactive queries and 20,000 batch queries per project per region, regardless of whether the project is on-demand or using a reservation. The following example shows the behavior for an on-demand project when the computed query concurrency is 202:

202 concurrent queries, followed by queued queries,
followed by queries that return an error.

For reservations, you have the option to set the maximum concurrency target, an upper bound on the number of queries that can run concurrently in a reservation, to ensure that each query is allocated some minimum number of slots. You can't specify a maximum concurrency target for an on-demand project; it is always dynamically computed.

Queuing behavior

BigQuery enforces fair scheduling to ensure that no single project can consume all of the slots in a reservation.

Queries from projects that have the smallest share of concurrency are dequeued first. During execution, slots are distributed fairly among projects before being distributed across jobs within a project.

For example, suppose you have a reservation that is assigned to two projects: A and B. BigQuery computes 5 for the concurrency of the reservation. Project A has four concurrently running queries, project B has one running query, and other queries are queued. A query from project B would be dequeued first even if it was submitted after the query from project A. After a query begins execution, it receives a fair share of slots in the shared reservation.

In addition to the total number of concurrent queries, BigQuery dynamically determines the maximum number of concurrent batch queries to run per on-demand project or reservation. If the number of concurrently running batch queries reaches this maximum, then interactive queries are prioritized even if they were submitted later.

When you delete a reservation, all queued queries time out. When a project assigned to a reservation is reassigned to another reservation, all requests that are queued or running continue to do so in the old reservation, while all new requests go to the new reservation. When a project assigned to a reservation is removed from the reservation, running queries continue in the reservation while new and queued requests execute using the on-demand model. You can optionally cancel individual running or queued query jobs.

Control queue timeout

To control the queue timeout for interactive or batch queries, use the ALTER PROJECT SET OPTIONS statement or the ALTER ORGANIZATION SET OPTIONS statement to set the default_interactive_query_queue_timeout_ms or default_batch_query_queue_timeout_ms fields in your project's or organization's default configuration.

To view the queue timeout for interactive or batch queries in your project, query the INFORMATION_SCHEMA.EFFECTIVE_PROJECT_OPTIONS view.

To turn off queuing, set the queue timeout to -1. If you reach your maximum query concurrency, then additional queries fail with an ADMISSION_DENIED error.

Set the maximum concurrency target

You can manually set the maximum concurrency target when you create a reservation. By default, the maximum concurrency target is zero, which means that BigQuery dynamically determines the concurrency based on available resources. Otherwise, if you set a nonzero target, the maximum concurrency target specifies an upper bound on the number of queries that run concurrently in a reservation, which guarantees a minimum amount of slot capacity available for each query that runs.

Increasing the maximum concurrency target doesn't guarantee that more queries execute simultaneously. The actual concurrency depends on the available compute resources, which can be increased by adding more slots to your reservation.

Required roles

To get the permission that you need to set the concurrency in a new reservation, ask your administrator to grant you the BigQuery Resource Editor (roles/bigquery.resourceEditor) IAM role on the administration project that maintains ownership of the commitments. For more information about granting roles, see Manage access to projects, folders, and organizations.

This predefined role contains the bigquery.reservations.create permission, which is required to set the concurrency in a new reservation.

You might also be able to get this permission with custom roles or other predefined roles.

For more information about IAM roles in BigQuery, see Predefined roles and permissions.

Set the maximum concurrency target for a reservation

Select one of the following options:

Console

  1. In the Google Cloud console, go to the BigQuery page.

    Go to BigQuery

  2. In the navigation menu, go to the Capacity management section.

  3. Click Create reservation.

  4. Select your reservation settings.

  5. To expand the Advanced settings section, click the expander arrow.

  6. To set the target job concurrency, click the Override automatic target job concurrency toggle to on and enter the Target Job Concurrency.

  7. Click Save.

SQL

To set the maximum concurrency target for a new reservation, use the CREATE RESERVATION DDL statement and set the target_job_concurrency field.

  1. In the Google Cloud console, go to the BigQuery page.

    Go to BigQuery

  2. In the query editor, enter the following statement:

    CREATE RESERVATION `ADMIN_PROJECT_ID.LOCATION.RESERVATION_NAME`
      OPTIONS (
        target_job_concurrency = CONCURRENCY);
    

    Replace the following:

    • ADMIN_PROJECT_ID: the project that owns the reservation
    • LOCATION: the location of the reservation, such as region-us
    • RESERVATION_NAME: the name of the reservation
    • CONCURRENCY: the maximum concurrency target

  3. Click Run.

For more information about how to run queries, see Run an interactive query.

bq

To set the maximum concurrency target for a new reservation, run the bq mk command:

bq mk \
    --project_id=ADMIN_PROJECT_ID \
    --location=LOCATION \
    --target_job_concurrency=CONCURRENCY \
    --reservation \
    RESERVATION_NAME

Replace the following:

  • ADMIN_PROJECT_ID: the project that owns the reservation
  • LOCATION: the location of the reservation
  • CONCURRENCY: the maximum concurrency target
  • RESERVATION_NAME: the name of the reservation

API

To set the maximum concurrency target in the BigQuery Reservation API, set the concurrency field in the reservation resource and call the CreateReservationRequest method.

Update the maximum concurrency target

You can update the maximum concurrency target for a reservation at any time. However, increasing the target doesn't guarantee that more queries execute simultaneously. The actual concurrency depends on the available compute resources. If you reduce the maximum concurrency target, then actively running queries are not impacted and queued queries aren't run until the number of concurrent queries falls below the new target.

If you set the maximum concurrency target to 0, BigQuery dynamically determines the concurrency based on available resources (the default behavior).

Required roles

To get the permission that you need to update the maximum concurrency target for a reservation, ask your administrator to grant you the BigQuery Resource Editor (roles/bigquery.resourceEditor) IAM role on the administration project that maintains ownership of the commitments. For more information about granting roles, see Manage access to projects, folders, and organizations.

This predefined role contains the bigquery.reservations.update permission, which is required to update the maximum concurrency target for a reservation.

You might also be able to get this permission with custom roles or other predefined roles.

For more information about IAM roles in BigQuery, see Predefined roles and permissions.

Update the maximum concurrency target for a reservation

Select one of the following options:

Console

  1. In the Google Cloud console, go to the BigQuery page.

    Go to BigQuery

  2. In the navigation menu, go to the Capacity management section.

  3. Click the Slot reservations tab.

  4. Find the reservation you want to update.

  5. Expand the Actions option.

  6. Click Edit.

  7. To expand the Advanced settings section, click the expander arrow.

  8. To set the target job concurrency, click the Override automatic target job concurrency toggle to on and enter the Target Job Concurrency.

  9. Click Save.

SQL

To update the maximum concurrency target for an existing reservation, use the ALTER RESERVATION DDL statement and set the target_job_concurrency field.

  1. In the Google Cloud console, go to the BigQuery page.

    Go to BigQuery

  2. In the query editor, enter the following statement:

    ALTER RESERVATION `ADMIN_PROJECT_ID.LOCATION.RESERVATION_NAME`
    SET OPTIONS (
      target_job_concurrency = CONCURRENCY);
    

    Replace the following:

    • ADMIN_PROJECT_ID: the project that owns the reservation
    • LOCATION: the location of the reservation, such as region-us
    • RESERVATION_NAME: the name of the reservation
    • CONCURRENCY: the maximum concurrency target

  3. Click Run.

For more information about how to run queries, see Run an interactive query.

bq

To update the maximum concurrency target for an existing reservation, run the bq update command:

bq update \
    --project_id=ADMIN_PROJECT_ID \
    --location=LOCATION \
    --target_job_concurrency=CONCURRENCY \
    --reservation \
    RESERVATION_NAME

Replace the following:

  • ADMIN_PROJECT_ID: the project that owns the reservation
  • LOCATION: the location of the reservation
  • CONCURRENCY: the maximum concurrency target
  • RESERVATION_NAME: the name of the reservation

API

To update the maximum concurrency target in the BigQuery Reservation API, set the concurrency field in the reservation resource and call the UpdateReservationRequest method.

Monitoring

To find out which queries are running and which are queued, look at the INFORMATION_SCHEMA.JOBS_BY_* and INFORMATION_SCHEMA.JOBS_TIMELINE_BY_* views. The state field is set to RUNNING for actively running queries and to PENDING for queued queries.

To view how many concurrent queries ran when the dynamic concurrency threshold was reached for each second over the last day, run the following query:

SELECT
  t1.period_start,
  t1.job_count AS dynamic_concurrency_threshold
FROM (
  SELECT
    period_start,
    state,
    COUNT(DISTINCT job_id) AS job_count
  FROM
    `PROJECT_ID.REGION_ID`.INFORMATION_SCHEMA.JOBS_TIMELINE
  WHERE
    period_start BETWEEN TIMESTAMP_SUB(CURRENT_TIMESTAMP(), INTERVAL 1 DAY)
    AND CURRENT_TIMESTAMP()
    AND reservation_id = "RESERVATION_ID"
  GROUP BY
    period_start,
    state) AS t1
JOIN (
  SELECT
    period_start,
    state,
    COUNT(DISTINCT job_id) AS job_count
  FROM
    `PROJECT_ID.REGION_ID`.INFORMATION_SCHEMA.JOBS_TIMELINE
  WHERE
    state = "PENDING"
    AND period_start BETWEEN TIMESTAMP_SUB(CURRENT_TIMESTAMP(), INTERVAL 1 DAY)
    AND CURRENT_TIMESTAMP()
    AND reservation_id = "RESERVATION_ID"
  GROUP BY
    period_start,
    state
  HAVING
    COUNT(DISTINCT job_id) > 0 ) AS t2
ON
  t1.period_start = t2.period_start
WHERE
  t1.state = "RUNNING";

Replace the following:

  • PROJECT_ID: the name of the project in which you ran the queries
  • REGION_ID: the location where the queries were processed
  • RESERVATION_ID: the name of the reservation the queries are running in

You can monitor the query queue length for your reservation by using BigQuery administrative resource charts and selecting the Job Concurrency chart with the metric Pending.

Queue length in administrative resource charts.

You can also monitor the queue length in Cloud Monitoring by viewing the job count metric and filtering by the number of jobs in a pending state.

Queue length in Cloud Monitoring.

Limitations

  • Each on-demand project can queue up to 1,000 interactive queries and 20,000 batch queries at one time. Queries that exceed this limit return a quota error. You cannot request an increase in these limits.
  • Within a reservation, each project assigned to that reservation can queue up to 1,000 interactive queries and 20,000 batch queries at one time. Queries that exceed this limit return a quota error. You cannot request an increase in these limits.
  • By default, query jobs that haven't started execution time out after 6 hours for interactive queries and 24 hours for batch queries.
  • You cannot set the maximum concurrency target for queries running in an on-demand project.
  • You cannot set the maximum concurrency target for queries running with a Standard edition reservation. For more information about editions, see Introduction to BigQuery editions.

What's next