gcloud beta memorystore instances update

NAME
gcloud beta memorystore instances update - update the configuration of a Memorystore instance
SYNOPSIS
gcloud beta memorystore instances update (INSTANCE : --location=LOCATION) [--async] [--[no-]deletion-protection-enabled] [--replica-count=REPLICA_COUNT] [--request-id=REQUEST_ID] [--shard-count=SHARD_COUNT] [--aof-config-append-fsync=AOF_CONFIG_APPEND_FSYNC --persistence-config-mode=PERSISTENCE_CONFIG_MODE --rdb-config-snapshot-period=RDB_CONFIG_SNAPSHOT_PERIOD --rdb-config-snapshot-start-time=RDB_CONFIG_SNAPSHOT_START_TIME] [--engine-configs=[ENGINE_CONFIGS,…]     | --update-engine-configs=[UPDATE_ENGINE_CONFIGS,…] --clear-engine-configs     | --remove-engine-configs=[__REMOVE_ENGINE_CONFIGS,…]] [--labels=[LABELS,…]     | --update-labels=[UPDATE_LABELS,…] --clear-labels     | --remove-labels=[__REMOVE_LABELS,…]] [GCLOUD_WIDE_FLAG]
DESCRIPTION
(BETA) Update the configuration of a Memorystore instance.
EXAMPLES
To update Memorystore instance my-instance in project my-project and location us-central1 to six shards, run:
gcloud beta memorystore instances update `my-instance` --project=my-project --location=us-central1 --shard-count=6

To update Memorystore instance my-instance in project my-project and location us-central1 to use a maxmemory-policy of allkeys-lru, run:

gcloud beta memorystore instances update `my-instance` --project=my-project --location=us-central1 --update-engine-configs=maxmemory-policy=allkeys-lru
POSITIONAL ARGUMENTS
Instance resource - Identifier. Unique name of the instance. Format: projects/{project}/locations/{location}/instances/{instance} The arguments in this group can be used to specify the attributes of this resource. (NOTE) Some attributes are not given arguments in this group but can be set in other ways.

To set the project attribute:

  • provide the argument instance on the command line with a fully specified name;
  • provide the argument --project on the command line;
  • set the property core/project.

This must be specified.

INSTANCE
ID of the instance or fully qualified identifier for the instance.

To set the instance attribute:

  • provide the argument instance on the command line.

This positional argument must be specified if any of the other arguments in this group are specified.

--location=LOCATION
The location id of the instance resource.

To set the location attribute:

  • provide the argument instance on the command line with a fully specified name;
  • provide the argument --location on the command line.
FLAGS
--async
Return immediately, without waiting for the operation in progress to complete.
Arguments for the deletion protection enabled.
--[no-]deletion-protection-enabled
If set to true deletion of the instance will fail. Use --deletion-protection-enabled to enable and --no-deletion-protection-enabled to disable.
Arguments for the replica count.
--replica-count=REPLICA_COUNT
Number of replica nodes per shard. If omitted the default is 0 replicas.
--request-id=REQUEST_ID
An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. The server will guarantee that for at least 60 minutes since the first request.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

--shard-count=SHARD_COUNT
Number of shards for the instance.
Represents persistence configuration for a instance.
Configuration for AOF based persistence.
--aof-config-append-fsync=AOF_CONFIG_APPEND_FSYNC
The fsync mode. AOF_CONFIG_APPEND_FSYNC must be one of:
always
Fsync every time new write commands are appended to the AOF. The best data loss protection at the cost of performance.
every-sec
Fsync every second. You may lose 1 second of data if there is a disaster.
never
Never fsync. Normally Linux will flush data every 30 seconds with this configuration, but it's up to the kernel's exact tuning.
--persistence-config-mode=PERSISTENCE_CONFIG_MODE
Current persistence mode. PERSISTENCE_CONFIG_MODE must be one of:
aof
AOF based persistence is enabled.
disabled
Persistence is disabled, and any snapshot data is deleted.
rdb
RDB based persistence is enabled.
Configuration for RDB based persistence.
--rdb-config-snapshot-period=RDB_CONFIG_SNAPSHOT_PERIOD
Period between RDB snapshots. RDB_CONFIG_SNAPSHOT_PERIOD must be one of:
one-hour
One hour.
six-hours
Six hours.
twelve-hours
Twelve hours.
twenty-four-hours
Twenty four hours.
--rdb-config-snapshot-start-time=RDB_CONFIG_SNAPSHOT_START_TIME
Time that the first snapshot was/will be attempted, and to which future snapshots will be aligned. If not provided, the current time will be used.
Update engine_configs.

At most one of these can be specified:

--engine-configs=[ENGINE_CONFIGS,…]
Set engine_configs to new value. User-provided engine configurations for the instance.
KEY
Sets KEY value.
VALUE
Sets VALUE value.
Shorthand Example:
--engine-configs=string=string

JSON Example:

--engine-configs='{"string": "string"}'

File Example:

--engine-configs=path_to_file.(yaml|json)

--update-engine-configs=[UPDATE_ENGINE_CONFIGS,…]
Update engine_configs value or add key value pair. User-provided engine configurations for the instance.
KEY
Sets KEY value.
VALUE
Sets VALUE value.
Shorthand Example:
--update-engine-configs=string=string

JSON Example:

--update-engine-configs='{"string": "string"}'

File Example:

--update-engine-configs=path_to_file.(yaml|json)

At most one of these can be specified:
--clear-engine-configs
Clear engine_configs value and set to empty map.
--remove-engine-configs=[__REMOVE_ENGINE_CONFIGS,…]
Remove existing value from map engine_configs.
Update labels.

At most one of these can be specified:

--labels=[LABELS,…]
Set labels to new value. Labels to represent user-provided metadata.
KEY
Keys must start with a lowercase character and contain only hyphens (-), underscores (_), lowercase characters, and numbers.
VALUE
Values must contain only hyphens (-), underscores (_), lowercase characters, and numbers.
Shorthand Example:
--labels=string=string

JSON Example:

--labels='{"string": "string"}'

File Example:

--labels=path_to_file.(yaml|json)

--update-labels=[UPDATE_LABELS,…]
Update labels value or add key value pair. Labels to represent user-provided metadata.
KEY
Keys must start with a lowercase character and contain only hyphens (-), underscores (_), lowercase characters, and numbers.
VALUE
Values must contain only hyphens (-), underscores (_), lowercase characters, and numbers.
Shorthand Example:
--update-labels=string=string

JSON Example:

--update-labels='{"string": "string"}'

File Example:

--update-labels=path_to_file.(yaml|json)

At most one of these can be specified:
--clear-labels
Clear labels value and set to empty map.
--remove-labels=[__REMOVE_LABELS,…]
Remove existing value from map labels.
GCLOUD WIDE FLAGS
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.

Run $ gcloud help for details.

API REFERENCE
This command uses the memorystore/v1beta API. The full documentation for this API can be found at: https://cloud.google.com/memorystore/
NOTES
This command is currently in beta and might change without notice. This variant is also available:
gcloud alpha memorystore instances update