gcloud alpha compute network-firewall-policies rules create

gcloud alpha compute network-firewall-policies rules create - creates a Compute Engine network firewall policy rule

gcloud alpha compute network-firewall-policies rules create PRIORITY --action=ACTION --firewall-policy=FIREWALL_POLICY [--description=DESCRIPTION] [--dest-address-groups=[DEST_ADDRESS_GROUPS,…]] [--dest-fqdns=[DEST_FQDNS,…]] [--dest-ip-ranges=[DEST_IP_RANGE,…]] [--dest-network-scope=DEST_NETWORK_SCOPE] [--dest-region-codes=[DEST_REGION_CODES,…]] [--dest-threat-intelligence=[DEST_THREAT_INTELLIGENCE_LISTS,…]] [--direction=DIRECTION] [--[no-]disabled] [--[no-]enable-logging] [--layer4-configs=[LAYER4_CONFIG,…]] [--security-profile-group=SECURITY_PROFILE_GROUP] [--src-address-groups=[SOURCE_ADDRESS_GROUPS,…]] [--src-fqdns=[SOURCE_FQDNS,…]] [--src-ip-ranges=[SRC_IP_RANGE,…]] [--src-network-scope=SRC_NETWORK_SCOPE] [--src-networks=[SRC_NETWORKS,…]] [--src-region-codes=[SOURCE_REGION_CODES,…]] [--src-secure-tags=[SOURCE_SECURE_TAGS,…]] [--src-threat-intelligence=[SOURCE_THREAT_INTELLIGENCE_LISTS,…]] [--target-secure-tags=[TARGET_SECURE_TAGS,…]] [--target-service-accounts=[TARGET_SERVICE_ACCOUNTS,…]] [--[no-]tls-inspect] [--firewall-policy-region=FIREWALL_POLICY_REGION     | --global-firewall-policy] [GCLOUD_WIDE_FLAG …]

gcloud alpha compute network-firewall-policies rules create 10 --firewall-policy=my-policy --action=allow --description="example rule" --global-firewall-policy

To create a rule with priority 10 in a regional network firewall policy with name my-region-policy and description example rule, in region region-a, run:

gcloud alpha compute network-firewall-policies rules create 10 --firewall-policy=my-policy --action=allow --description="example rule"

PRIORITY

Priority of the rule to be inserted. Valid in [0, 65535].

--action=ACTION

Action to take if the request matches the match condition. ACTION must be one of: allow, deny, goto_next, apply_security_profile_group.

--firewall-policy=FIREWALL_POLICY

Firewall policy ID with which to create rule.

--description=DESCRIPTION

An optional, textual description for the rule.

--dest-address-groups=[DEST_ADDRESS_GROUPS,…]

Destination address groups to match for this rule. Can only be specified if DIRECTION is engress.

--dest-fqdns=[DEST_FQDNS,…]

Destination FQDNs to match for this rule. Can only be specified if DIRECTION is egress.

--dest-ip-ranges=[DEST_IP_RANGE,…]

Destination IP ranges to match for this rule.

--dest-network-scope=DEST_NETWORK_SCOPE

Use this flag to indicate that the rule should match internet or non-internet traffic. It applies to destination traffic for egress rules. Valid values are INTERNET, NON_INTERNET and INTRA_VPC. Use empty string to clear the field.

--dest-region-codes=[DEST_REGION_CODES,…]

Destination Region Code to match for this rule. Can only be specified if DIRECTION is egress. Cannot be specified when the source network scope is NON_INTERNET.

--dest-threat-intelligence=[DEST_THREAT_INTELLIGENCE_LISTS,…]

Destination Threat Intelligence lists to match for this rule. Can only be specified if DIRECTION is egress. Cannot be specified when source network scope is NON_INTERNET. The available lists can be found here: https://cloud.google.com/vpc/docs/firewall-policies-rule-details#threat-intelligence-fw-policy.

--direction=DIRECTION

Direction of the traffic the rule is applied. The default is to apply on incoming traffic. DIRECTION must be one of: INGRESS, EGRESS.

--[no-]disabled

Use this flag to disable the rule. Disabled rules will not affect traffic. Use --disabled to enable and --no-disabled to disable.

--[no-]enable-logging

Use this flag to enable logging of connections that allowed or denied by this rule. Use --enable-logging to enable and --no-enable-logging to disable.

--layer4-configs=[LAYER4_CONFIG,…]

A list of destination protocols and ports to which the firewall rule will apply.

--security-profile-group=SECURITY_PROFILE_GROUP

A security profile group to be used with apply_security_profile_group action.

--src-address-groups=[SOURCE_ADDRESS_GROUPS,…]

Source address groups to match for this rule. Can only be specified if DIRECTION is ingress.

--src-fqdns=[SOURCE_FQDNS,…]

Source FQDNs to match for this rule. Can only be specified if DIRECTION is ingress.

--src-ip-ranges=[SRC_IP_RANGE,…]

A list of IP address blocks that are allowed to make inbound connections that match the firewall rule to the instances on the network. The IP address blocks must be specified in CIDR format: http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing.Either --src-ip-ranges or --src-secure-tags must be specified for INGRESS traffic. If both --src-ip-ranges and --src-secure-tags are specified, the rule matches if either the range of the source matches --src-ip-ranges or the secure tag of the source matches --src-secure-tags.Multiple IP address blocks can be specified if they are separated by commas.

--src-network-scope=SRC_NETWORK_SCOPE

Use this flag to indicate that the rule should match internet, non-internet traffic or traffic coming from the network specified by --src-network. It applies to ingress rules. Valid values are INTERNET, NON_INTERNET, VPC_NETWORKS and INTRA_VPC. Use empty string to clear the field.

--src-networks=[SRC_NETWORKS,…]

The source VPC networks to match for this rule. It can only be specified when --src-network-scope is VPC_NETWORKS. It applies to ingress rules. It accepts full or partial URLs.

--src-region-codes=[SOURCE_REGION_CODES,…]

Source Region Code to match for this rule. Can only be specified if DIRECTION is ingress. Cannot be specified when the source network scope is NON_INTERNET, VPC_NETWORK or INTRA_VPC.

--src-secure-tags=[SOURCE_SECURE_TAGS,…]

A list of instance secure tags indicating the set of instances on the network to which the rule applies if all other fields match. Either --src-ip-ranges or --src-secure-tags must be specified for ingress traffic. If both --src-ip-ranges and --src-secure-tags are specified, an inbound connection is allowed if either the range of the source matches --src-ip-ranges or the tag of the source matches --src-secure-tags. Secure Tags can be assigned to instances during instance creation. Secure tags cannot be specified if source network scope is INTERNET.

--src-threat-intelligence=[SOURCE_THREAT_INTELLIGENCE_LISTS,…]

Source Threat Intelligence lists to match for this rule. Can only be specified if DIRECTION is ingress. Cannot be specified when the source network scope is NON_INTERNET, VPC_NETWORK or INTRA_VPC. The available lists can be found here: https://cloud.google.com/vpc/docs/firewall-policies-rule-details#threat-intelligence-fw-policy.

--target-secure-tags=[TARGET_SECURE_TAGS,…]

An optional, list of target secure tags with a name of the format tagValues/ or full namespaced name

--target-service-accounts=[TARGET_SERVICE_ACCOUNTS,…]

List of target service accounts for the rule.

--[no-]tls-inspect

Use this flag to indicate whether TLS traffic should be inspected using the TLS inspection policy when the security profile group is applied. Default: no TLS inspection. Use --tls-inspect to enable and --no-tls-inspect to disable.

At most one of these can be specified:

--firewall-policy-region=FIREWALL_POLICY_REGION

Region of the firewall policy to create. Overrides the default compute/region property value for this command invocation.

--global-firewall-policy

If set, the firewall policy is global.

Run $ gcloud help for details.

gcloud compute network-firewall-policies rules create

gcloud beta compute network-firewall-policies rules create