gcloud alpha dataplex entries update

gcloud alpha dataplex entries update - update a Dataplex Entry

gcloud alpha dataplex entries update (ENTRY : --entry-group=ENTRY_GROUP --location=LOCATION) [--remove-aspects=[ASPECT_TYPE@PATH,…]] [--update-aspects=YAML_OR_JSON_FILE] [--clear-fully-qualified-name     | --fully-qualified-name=FULLY_QUALIFIED_NAME] [--entry-source-update-time=DATE_TIME : --clear-entry-source-create-time     | --entry-source-create-time=DATE_TIME --clear-entry-source-description     | --entry-source-description=DESCRIPTION --clear-entry-source-display-name     | --entry-source-display-name=DISPLAY_NAME --clear-entry-source-labels     | --entry-source-labels=[KEY=VALUE,…] --clear-entry-source-platform     | --entry-source-platform=PLATFORM_NAME --clear-entry-source-resource     | --entry-source-resource=RESOURCE --clear-entry-source-system     | --entry-source-system=SYSTEM_NAME] [GCLOUD_WIDE_FLAG …]

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --fully-qualified-name='custom:a.b.c'

To update description of an entry, run:

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --entry-source-description='Updated description' --entry-source-update-time='1998-09-04T12:00:00-0700'

To clear the description of an entry, run:

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --clear-entry-source-description --entry-source-update-time='1998-09-04T12:00:00-0700'

To add or update aspects from the YAML/JSON file, run:

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --update-aspects=path-to-a-file-with-aspects.json

To remove all aspects of type test-project.us-central1.some-aspect-type from the entry, run:

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --remove-aspects='test-project.us-central1.some-aspect-type@*'

To remove all aspects on path Schema.column1 from the entry, run:

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --remove-aspects='*@Schema.column1'

To remove exact aspects test-project.us-central1.some-aspect-type@Schema.column1 and test-project.us-central1.some-aspect-type2@Schema.column2 from the entry, run:

gcloud alpha dataplex entries update entry1 --project=test-project --location=us-central1 --entry-group entry-group1 --remove-aspects=test-project.us-central1.some-aspect-type@Schema.column1,test-project.us-central2.some-aspect-type@Schema.column2

Entry resource - Arguments and flags that define the Dataplex Entry you want to reference. The arguments in this group can be used to specify the attributes of this resource. (NOTE) Some attributes are not given arguments in this group but can be set in other ways.

To set the project attribute:

• provide the argument entry on the command line with a fully specified name;
• provide the argument --project on the command line;
• set the property core/project.

This must be specified.

ENTRY

ID of the entry or fully qualified identifier for the entry.

To set the entry attribute:

• provide the argument entry on the command line.

This positional argument must be specified if any of the other arguments in this group are specified.

--entry-group=ENTRY_GROUP

Entry group containing Dataplex Entries. To set the entry-group attribute:

• provide the argument entry on the command line with a fully specified name;
• provide the argument --entry-group on the command line.

--location=LOCATION

Location of the Dataplex resource. To set the location attribute:

• provide the argument entry on the command line with a fully specified name;
• provide the argument --location on the command line;
• set the property dataplex/location.

--remove-aspects=[ASPECT_TYPE@PATH,…]

List of Aspect keys, identifying Aspects to remove from the entry.

Keys are in the format ASPECT_TYPE@PATH, or just ASPECT_TYPE, if the Aspect is attached to an entry itself rather than to a specific column defined in the schema.

ASPECT_TYPE is expected to be in a format PROJECT_ID.LOCATION.ASPECT_TYPE_ID or a wildcard *, which targets all aspect types.

PATH can be either empty (which means a 'root' path, such that Aspect is attached to the entry itself), point to a specific column defined in the schema (for example: Schema.some_column) or a wildcard * (target all paths).

ASPECT_TYPE and PATH cannot be both specified as wildcards *.

If both --update-aspects and --remove-aspects flags are specified, and the same aspect key is used in both flags, then --update-aspects takes precedence, and such an aspect will be updated and not removed.

--update-aspects=YAML_OR_JSON_FILE

Path to a YAML or JSON file containing Aspects to add or update.

When this flag is specified, only Aspects referenced in the file are going to be added or updated. Specifying this flag does not remove any Aspects from the entry. In other words, specifying this flag will not lead to a full replacement of Aspects with a contents of the provided file.

Content of the file contains a map, where keys are in the format ASPECT_TYPE@PATH, or just ASPECT_TYPE, if the Aspect is attached to an entry itself rather than to a specific column defined in the schema.

Values in the map represent Aspect's content, which must conform to a template defined for a given ASPECT_TYPE. Each Aspect will be replaced fully by the provided content. That means data in the Aspect will be replaced and not merged with existing contents of that Aspect in the Entry.

ASPECT_TYPE is expected to be in a format PROJECT_ID.LOCATION.ASPECT_TYPE_ID.

PATH can be either empty (which means a 'root' path, such that Aspect is attached to the entry itself) or point to a specific column defined in the schema. For example: Schema.some_column.

Example YAML format:

  project-id1.us-central1.my-aspect-type1:
    data:
      aspectField1: someValue
      aspectField2: someOtherValue
  project-id2.us-central1.my-aspect-type2@Schema.column1:
    data:
      aspectField3: someValue3

Example JSON format:

  {
    "project-id1.us-central1.my-aspect-type1": {
      "data": {
        "aspectField1": "someValue",
        "aspectField2": "someOtherValue"
      }
    },
    "project-id2.us-central1.my-aspect-type2@Schema.column1": {
      "data": {
        "aspectField3": "someValue3"
      }
    }
  }

If both --update-aspects and --remove-aspects flags are specified, and the same aspect key is used in both flags, then --update-aspects takes precedence, and such an aspect will be updated and not removed.

At most one of these can be specified:

--clear-fully-qualified-name

Clear the FQN for the Entry.

--fully-qualified-name=FULLY_QUALIFIED_NAME

FQN, a name for the entry that can reference it in an external system.

Source system related information for an entry. If any of the entry source fields are specified, then ``--entry-source-update-time must be specified as well.

--entry-source-update-time=DATE_TIME

The update date and time of the resource in the source system.

This flag argument must be specified if any of the other arguments in this group are specified.

At most one of these can be specified:

--clear-entry-source-create-time

Clear the value for the create_time field in the Entry Source.

--entry-source-create-time=DATE_TIME

The creation date and time of the resource in the source system.

At most one of these can be specified:

--clear-entry-source-description

Clear the value for the description field in the Entry Source.

--entry-source-description=DESCRIPTION

Description of the Entry.

At most one of these can be specified:

--clear-entry-source-display-name

Clear the value for the display_name field in the Entry Source.

--entry-source-display-name=DISPLAY_NAME

User friendly display name.

At most one of these can be specified:

--clear-entry-source-labels

Clear the labels for the Entry Source.

--entry-source-labels=[KEY=VALUE,…]

List of label KEY=VALUE pairs to add.

Keys must start with a lowercase character and contain only hyphens (-), underscores (_), lowercase characters, and numbers. Values must contain only hyphens (-), underscores (_), lowercase characters, and numbers.

At most one of these can be specified:

--clear-entry-source-platform

Clear the value for the platform field in the Entry Source.

--entry-source-platform=PLATFORM_NAME

The platform containing the source system.

At most one of these can be specified:

--clear-entry-source-resource

Clear the value for the resource field in the Entry Source.

--entry-source-resource=RESOURCE

The name of the resource in the source system.

At most one of these can be specified:

--clear-entry-source-system

Clear the value for the system field in the Entry Source.

--entry-source-system=SYSTEM_NAME

The name of the source system.

Run $ gcloud help for details.