- NAME
-
- gcloud alpha compute firewall-policies rules create - creates a Compute Engine firewall policy rule
- SYNOPSIS
-
-
gcloud alpha compute firewall-policies rules create
PRIORITY
--action
=ACTION
--firewall-policy
=FIREWALL_POLICY
[--description
=DESCRIPTION
] [--dest-address-groups
=[DEST_ADDRESS_GROUPS
,…]] [--dest-fqdns
=[DEST_FQDNS
,…]] [--dest-ip-ranges
=[DEST_IP_RANGE
,…]] [--dest-network-scope
=DEST_NETWORK_SCOPE
] [--dest-region-codes
=[DEST_REGION_CODES
,…]] [--dest-threat-intelligence
=[DEST_THREAT_INTELLIGENCE_LISTS
,…]] [--direction
=DIRECTION
] [--[no-]disabled
] [--[no-]enable-logging
] [--layer4-configs
=[LAYER4_CONFIG
,…]] [--organization
=ORGANIZATION
] [--security-profile-group
=SECURITY_PROFILE_GROUP
] [--src-address-groups
=[SOURCE_ADDRESS_GROUPS
,…]] [--src-fqdns
=[SOURCE_FQDNS
,…]] [--src-ip-ranges
=[SRC_IP_RANGE
,…]] [--src-network-scope
=SRC_NETWORK_SCOPE
] [--src-networks
=[SRC_NETWORKS
,…]] [--src-region-codes
=[SOURCE_REGION_CODES
,…]] [--src-threat-intelligence
=[SOURCE_THREAT_INTELLIGENCE_LISTS
,…]] [--target-resources
=[TARGET_RESOURCES
,…]] [--target-service-accounts
=[TARGET_SERVICE_ACCOUNTS
,…]] [--[no-]tls-inspect
] [GCLOUD_WIDE_FLAG …
]
-
- DESCRIPTION
-
(ALPHA)
gcloud alpha compute firewall-policies rules create
is used to create organization firewall policy rules. - EXAMPLES
-
To create a rule with priority ``10" in an organization firewall policy with ID
``123456789", run:
gcloud alpha compute firewall-policies rules create 10 --firewall-policy=123456789 --action=allow --description=example-rule
- POSITIONAL ARGUMENTS
-
PRIORITY
- Priority of the firewall policy rule to create.
- REQUIRED FLAGS
-
--action
=ACTION
-
Action to take if the request matches the match condition.
ACTION
must be one of:allow
,deny
,goto_next
,apply_security_profile_group
. --firewall-policy
=FIREWALL_POLICY
- Short name of the firewall policy into which the rule should be inserted.
- OPTIONAL FLAGS
-
--description
=DESCRIPTION
- An optional, textual description for the rule.
--dest-address-groups
=[DEST_ADDRESS_GROUPS
,…]- Destination address groups to match for this rule. Can only be specified if DIRECTION is egress.
--dest-fqdns
=[DEST_FQDNS
,…]-
Destination FQDNs to match for this rule. Can only be specified if DIRECTION is
egress
. --dest-ip-ranges
=[DEST_IP_RANGE
,…]- Destination IP ranges to match for this rule.
--dest-network-scope
=DEST_NETWORK_SCOPE
- Use this flag to indicate that the rule should match internet or non-internet traffic. It applies to destination traffic for egress rules. Valid values are INTERNET, NON_INTERNET and INTRA_VPC. Use empty string to clear the field.
--dest-region-codes
=[DEST_REGION_CODES
,…]-
Destination Region Code to match for this rule. Can only be specified if
DIRECTION is
egress
. Cannot be specified when the source network scope is NON_INTERNET. --dest-threat-intelligence
=[DEST_THREAT_INTELLIGENCE_LISTS
,…]-
Destination Threat Intelligence lists to match for this rule. Can only be
specified if DIRECTION is
egress
. Cannot be specified when source network scope is NON_INTERNET. The available lists can be found here: https://cloud.google.com/vpc/docs/firewall-policies-rule-details#threat-intelligence-fw-policy. --direction
=DIRECTION
-
Direction of the traffic the rule is applied. The default is to apply on
incoming traffic.
DIRECTION
must be one of:INGRESS
,EGRESS
. --[no-]disabled
-
Use this flag to disable the rule. Disabled rules will not affect traffic. Use
--disabled
to enable and--no-disabled
to disable. --[no-]enable-logging
-
Use this flag to enable logging of connections that allowed or denied by this
rule. Use
--enable-logging
to enable and--no-enable-logging
to disable. --layer4-configs
=[LAYER4_CONFIG
,…]- A list of destination protocols and ports to which the firewall rule will apply.
--organization
=ORGANIZATION
- Organization which the organization firewall policy belongs to. Must be set if FIREWALL_POLICY is short name.
--security-profile-group
=SECURITY_PROFILE_GROUP
- An org-based security profile group to be used with apply_security_profile_group action. Allowed formats are: a) http(s)://<namespace>/<api>/organizations/<org_id>/locations/global/securityProfileGroups/<profile> b) (//)<namespace>/organizations/<org_id>/locations/global/securityProfileGroups/<profile> c) <profile>. In case "c" gCloud CLI will create a reference matching format "a", but to make it work CLOUDSDK_API_ENDPOINT_OVERRIDES_NETWORKSECURITY property must be set. In order to set this property, please run the command gcloud config set api_endpoint_overrides/networksecurity https://<namespace>/.
--src-address-groups
=[SOURCE_ADDRESS_GROUPS
,…]- Source address groups to match for this rule. Can only be specified if DIRECTION is ingress.
--src-fqdns
=[SOURCE_FQDNS
,…]-
Source FQDNs to match for this rule. Can only be specified if DIRECTION is
ingress
. --src-ip-ranges
=[SRC_IP_RANGE
,…]- Source IP ranges to match for this rule.
--src-network-scope
=SRC_NETWORK_SCOPE
- Use this flag to indicate that the rule should match internet, non-internet traffic or traffic coming from the network specified by --src-network. It applies to ingress rules. Valid values are INTERNET, NON_INTERNET, VPC_NETWORKS and INTRA_VPC. Use empty string to clear the field.
--src-networks
=[SRC_NETWORKS
,…]- The source VPC networks to match for this rule. It can only be specified when --src-network-scope is VPC_NETWORKS. It applies to ingress rules. It accepts full or partial URLs.
--src-region-codes
=[SOURCE_REGION_CODES
,…]-
Source Region Code to match for this rule. Can only be specified if DIRECTION is
ingress
. Cannot be specified when the source network scope is NON_INTERNET, VPC_NETWORK or INTRA_VPC. --src-threat-intelligence
=[SOURCE_THREAT_INTELLIGENCE_LISTS
,…]-
Source Threat Intelligence lists to match for this rule. Can only be specified
if DIRECTION is
ingress
. Cannot be specified when the source network scope is NON_INTERNET, VPC_NETWORK or INTRA_VPC. The available lists can be found here: https://cloud.google.com/vpc/docs/firewall-policies-rule-details#threat-intelligence-fw-policy. --target-resources
=[TARGET_RESOURCES
,…]- List of URLs of target resources to which the rule is applied.
--target-service-accounts
=[TARGET_SERVICE_ACCOUNTS
,…]- List of target service accounts for the rule.
--[no-]tls-inspect
-
Use this flag to indicate whether TLS traffic should be inspected using the TLS
inspection policy when the security profile group is applied. Default: no TLS
inspection. Use
--tls-inspect
to enable and--no-tls-inspect
to disable.
- GCLOUD WIDE FLAGS
-
These flags are available to all commands:
--access-token-file
,--account
,--billing-project
,--configuration
,--flags-file
,--flatten
,--format
,--help
,--impersonate-service-account
,--log-http
,--project
,--quiet
,--trace-token
,--user-output-enabled
,--verbosity
.Run
$ gcloud help
for details. - NOTES
-
This command is currently in alpha and might change without notice. If this
command fails with API permission errors despite specifying the correct project,
you might be trying to access an API with an invitation-only early access
allowlist. These variants are also available:
gcloud compute firewall-policies rules create
gcloud beta compute firewall-policies rules create
Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.0 License, and code samples are licensed under the Apache 2.0 License. For details, see the Google Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.
Last updated 2024-11-06 UTC.