Hanya pemenang dari lelang 105 Federal Communications Commission (FCC),
atau sub-lisensi terverifikasi yang dapat mendapatkan perlindungan di saluran PAL mereka.
Hubungi tim dukungan vendor CBSD atau Domain Proxy (DP) Anda untuk
mengonfirmasi hal berikut:
Vendor Anda mendukung PAL dan lulus pengujian interoperabilitas PAL dengan SAS.
Jika ada upgrade firmware yang diperlukan untuk dukungan PAL.
Jika Anda perlu mengonfigurasi setelan SAS atau DP khusus untuk PAL.
Memverifikasi nomor pendaftaran FCC
FRN Anda harus disimpan ke Portal SAS untuk meminta pemberian PAL.
Jika FRN tidak benar, SAS tidak dapat memberikan perlindungan PAL di
saluran PAL Anda di county berlisensi.
Minta hibah di satu atau beberapa saluran PAL. Hubungi
vendor CBSD atau DP Anda untuk mendapatkan petunjuk tentang cara meminta hibah di
saluran PAL Anda.
Setelah Anda meminta pemberian PAL yang valid dari CBSD, SAS akan otomatis membuat PPA pada Aktivitas Berkala Terkoordinasi berikutnya di antara SAS (CPAS). Semua pemberian yang ada untuk
CBSD operator lain di saluran PAL Anda dalam PPA
akan dihentikan setelah CPAS. Pelajari PPA lebih lanjut.
Satu pemberian tidak boleh berisi frekuensi PAL dan GAA. Jika Anda memerlukan lebih banyak
bandwidth daripada saluran PAL yang Anda miliki, hubungi vendor CBSD untuk
mendapatkan petunjuk tentang cara meminta hibah terpisah untuk rentang frekuensi
PAL dan GAA. Operator lain tidak melindungi hibah GAA di samping
hibah PAL CBSD dari interferensi.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-09-04 UTC."],[],[],null,["# Use Priority Access Licenses\n\nIf you are a\n[Priority Access License (PAL)](/spectrum-access-system/docs/key-terms#pal) licensee,\nyou can use the\n[Google Spectrum Access System (SAS) Portal](/spectrum-access-system/docs/key-terms#sas-portal)\nto do the following:\n\n- Confirm if your PAL is properly registered with [Spectrum Access System (SAS)](/spectrum-access-system/docs/key-terms#sas).\n- Check the geographic areas that are protected from [General Authorized Access (GAA)](/spectrum-access-system/docs/key-terms#gaa) interference for your PAL-protected SASs.\n\n| **Note:** Tier 1 incumbents can temporarily suspend PAL operators as needed. [Learn more about PALs](/spectrum-access-system/docs/pals).\n\nBefore you begin\n----------------\n\nOnly winners from the [Federal Communications Commission (FCC) auction 105](https://www.fcc.gov/auction/105),\nor a verified sub-licensee can get protection on their PAL channels.\nContact your CBSD or Domain Proxy (DP) vendor support team to\nconfirm the following:\n\n- Your vendor supports PALs and passed PAL interoperability testing with SAS.\n- If there are firmware upgrades required for PAL support.\n- If you need to configure any SAS or DP settings specific to PALs.\n\nVerify your FCC registration number\n-----------------------------------\n\nYour FRN must be saved to the SAS Portal to request PAL grants.\nIf the FRN is not correct, SAS cannot provide PAL protection on\nyour PAL channels in your licensed counties.\n\nTo verify the FRN, do the following:\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. Click **View deployments**.\n3. On the left, click *settings* **Settings**.\n4. On the right, select the **FRN** field.\n5. Confirm that the FRN listed is correct. If the **FRN** field is missing or incorrect, contact [SAS Support](/spectrum-access-system/docs/getting-support) and provide the correct FRN.\n\nPrepare your CBSD for a PAL grant\n---------------------------------\n\nYou must request the PAL grant from your CBSD or DP. You cannot\nrequest a grant from the SAS Portal.\n\nTo prepare your CBSD for a PAL grant, follow these steps:\n\n1. Confirm that your CBSD's GPS coordinates are located within your PAL county.\n 1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n 2. Click **View deployments**.\n 3. On the left, click *map* **Map view**.\n 4. On the left, click *layers* **Overlays** , and then click **PAL**.\n 5. Expand the county folder and find the item labeled with the county name followed by county.\n 6. To show it on the map, select the county boundary.\n2. Confirm your PAL channels.\n 1. [Find and select your CBSD](/spectrum-access-system/docs/(/spectrum-access-system/docs/cbsd/review-configuration)).\n 2. On the right, click the **Status** tab.\n 3. Confirm that your PAL channels are marked with a **P**.\n3. Request a grant on one or multiple PAL channels. Check with your CBSD or DP vendor for instructions about how to request a grant on your PAL channel.\n4. After you request a valid PAL grant from your CBSD, SAS automatically generates a PPA at the next Coordinated Periodic Activities among SASs (CPAS). Any existing grants for other operators' CBSDs on your PAL channel within the PPA are terminated after CPAS. [Learn more about PPAs](/spectrum-access-system/docs/manage-ppa).\n\nA single grant cannot contain both PAL and GAA frequencies. If you need more\nbandwidth than you have PAL channels, check with your CBSD vendor for\ninstructions about how to request separate grants for the PAL and GAA frequency\nranges. Other operators do not protect GAA grants next to a\nCBSD's PAL grant from interference.\n\nView the PPA for a PAL-protected CBSD\n-------------------------------------\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. If you have access to multiple organizations, select the organization with the CBSD that you want to review.\n3. [Find your CBSD](/spectrum-access-system/docs/cbsd/review-configuration).\n4. Click the CBSD.\n5. On the right, click the **Coex** tab.\n6. In the **PAL Protection Areas** section, click the PPAs to view their boundaries.\n\n | **Important:** If a PPA is unavailable and you cannot click it, then the PPA doesn't have interference protection from GAA operators. Protection begins after the PAL grant has gone through CPAS. [Learn more about PPAs](/spectrum-access-system/docs/manage-ppa).\n\nView PALs and PPAs for your PAL counties\n----------------------------------------\n\n1. Go to the [SAS Portal](https://wirelessconnectivity.google.com/sas/).\n2. If you have access to multiple organizations, select the organization with the CBSD that you want to review.\n3. On the left, click *layers* **Overlays**.\n4. Click the **PAL** tab.\n5. To find all PALs assigned to the county, expand the county folder.\n6. Select a PAL to load and show all PPAs associated with that PAL on the map.\n\nWhat's next\n-----------\n\n- Learn about [PALs](/spectrum-access-system/docs/pals).\n- Learn about [Spectrum Access System](/spectrum-access-system/docs/overview).\n- Learn about [key SAS terms](/spectrum-access-system/docs/key-terms).\n- [Troubleshoot SAS issues](/spectrum-access-system/docs/troubleshooting)."]]
