Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Admin Looker dapat mengelola konektor yang dapat digunakan untuk membuat sumber data bagi laporan Looker. Konektor adalah mekanisme yang digunakan laporan Looker untuk mengakses data dari platform, sistem, atau produk data tertentu. Jika konektor laporan Looker diaktifkan di instance Looker, pengguna dapat membuat sumber data untuk menambahkan data dari set data pokok sumber data ke laporan Looker mereka.
Admin Looker dapat mengaktifkan semua konektor laporan yang tersedia atau konektor individual. Konektor buatan Google diaktifkan secara default.
Sebelum memulai
Untuk mengelola konektor yang tersedia untuk digunakan dalam membuat sumber data di laporan Looker, perhatikan persyaratan berikut:
Instance Looker harus memenuhi semua persyaratan untuk mendukung Studio di Looker.
Pengguna harus memiliki peran Admin Looker untuk mengaktifkan atau menonaktifkan konektor laporan.
Mengaktifkan konektor laporan
Untuk mengaktifkan satu atau beberapa konektor laporan, ikuti langkah-langkah berikut:
Di panel Admin instance Looker Anda, buka bagian Laporan (Studio di Looker), lalu buka halaman Konektor laporan: Admin > Laporan (Studio di Looker) > Konektor laporan.
Untuk mengaktifkan semua konektor yang tersedia untuk digunakan di Studio di Looker, aktifkan Pilih semua. Atau, untuk mengaktifkan konektor satu per satu, aktifkan tombol masing-masing konektor.
Menonaktifkan konektor laporan
Untuk menonaktifkan satu atau beberapa konektor laporan, ikuti langkah-langkah berikut:
Di panel Admin instance Looker Anda, buka bagian Laporan (Studio di Looker), lalu buka halaman Konektor laporan: Admin > Laporan (Studio di Looker) > Konektor laporan.
Untuk menonaktifkan semua konektor yang tersedia untuk digunakan di Studio di Looker, nonaktifkan Pilih semua. Atau, untuk menonaktifkan konektor satu per satu, nonaktifkan tombol yang sesuai untuk setiap konektor.
Pengaruh menonaktifkan konektor laporan
Jika admin Looker menonaktifkan konektor, perubahan berikut akan berlaku:
Pengguna tidak dapat lagi membuat laporan Looker di lingkungan Studio di Looker menggunakan konektor tersebut.
Laporan yang ada yang dibuat dengan konektor tersebut masih dapat diakses dari instance Looker, tetapi editor laporan tidak lagi dapat mengedit sumber data.
Laporan yang ada dan dibuat dengan konektor yang dinonaktifkan tidak dapat disalin lagi.
Admin Looker tetap dapat menghapus sumber data dari laporan yang ada yang dibuat dengan konektor yang dinonaktifkan.
Efek menonaktifkan Studio di Looker
Jika admin Looker menonaktifkan Studio di Looker untuk instance Looker, semua konektor laporan akan otomatis dinonaktifkan.
Mengaktifkan kembali Studio di Looker akan memulihkan setelan konektor laporan default.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-09-04 UTC."],[],[],null,["# Managing report connectors\n\n| **Preview**\n|\n|\n| This product or feature is subject to the \"Pre-GA Offerings Terms\" in the General Service Terms section\n| of the [Service Specific Terms](/terms/service-terms#1).\n|\n| Pre-GA products and features are available \"as is\" and might have limited support.\n|\n| For more information, see the\n| [launch stage descriptions](/products#product-launch-stages).\n\nLooker admins can manage which connectors can be used to create data sources for Looker reports. [*Connectors*](/looker/docs/studio/connector) are the mechanism by which Looker reports access data from a specific data platform, system, or product. When a Looker report connector is enabled on a Looker instance, users can create [*data sources*](/looker/docs/studio/about-data-sources) to add data from the data source's underlying dataset into their Looker reports.\n\nLooker admins can enable all available report connectors or individual connectors. Google-authored connectors are enabled by default.\n\nBefore you begin\n----------------\n\nTo manage the connectors that are available to use to create data sources on Looker reports, note the following requirements:\n\n- The Looker instance must meet all [requirements](/looker/docs/enabling-studio-in-looker#requirements_and_limitations) to support Studio in Looker.\n- A Looker admin must [enable Studio in Looker](/looker/docs/enabling-studio-in-looker#enabling_studio_in_looker).\n- Users must have the [Looker Admin role](/looker/docs/admin-panel-users-roles#admin) to enable or disable report connectors.\n\nEnabling report connectors\n--------------------------\n\nTo enable one or more report connectors, follow these steps:\n\n1. In your Looker instance's **Admin** panel, navigate to the **Reports (Studio in Looker)** section, and then open the **Report connectors** page: **Admin** \\\u003e **Reports (Studio in Looker)** \\\u003e **Report connectors**.\n2. To enable all of the connectors that are available for use in Studio in Looker, turn on **Select all**. Alternatively, to enable individual connectors, turn on each connector's corresponding toggle.\n\n| **Note:** If you don't see the **Report connectors** admin page, confirm that the **Enable reports** setting is turned on from the **Reports setup** admin page. You may need to use that setting to [enable Studio in Looker](/looker/docs/enabling-studio-in-looker) and then click **Manage report connectors** to load the **Report connectors** admin page.\n\nDisabling report connectors\n---------------------------\n\nTo disable one or more report connectors, follow these steps:\n\n1. In your Looker instance's **Admin** panel, navigate to the **Reports (Studio in Looker)** section, and then open the **Report connectors** page: **Admin** \\\u003e **Reports (Studio in Looker)** \\\u003e **Report connectors**.\n2. To disable all of the connectors that are available for use in Studio in Looker, turn off **Select all**. Alternatively, to disable individual connectors, turn off each connector's corresponding toggle.\n\n### Effects of disabling report connectors\n\nIf a Looker admin disables a connector, the following changes take effect:\n\n- Users can no longer create Looker reports in the Studio in Looker environment using that connector.\n- Any existing reports that were built with that connector are still accessible from the Looker instance, but report editors can no longer [edit the data source](/looker/docs/studio/edit-a-data-source-article).\n- Any existing reports that were built with the disabled connector can no longer be copied.\n\nLooker admins can still [remove a data source](/looker/docs/studio/delete-a-data-source) from an existing report built with a disabled connector.\n\nEffects of disabling Studio in Looker\n-------------------------------------\n\nIf a Looker admin disables Studio in Looker for a Looker instance, all report connectors are disabled automatically.\n\nRe-enabling Studio in Looker restores the default report connector settings.\n\nRelated resources\n-----------------\n\n- [About Looker Studio data sources](/looker/docs/studio/about-data-sources)\n- [Feature availability in Studio in Looker](/looker/docs/studio-in-looker-feature-availability)"]]
