Periksa kuota Anda untuk memastikan Anda memiliki bandwidth yang cukup untuk mendukung traffic yang diharapkan antar-metro. Jika memerlukan lebih banyak kuota, Anda harus meminta penambahan
sebelum melanjutkan. Demikian pula, periksa batas bandwidth maksimum per kabel dan minta pengecualian jika perlu.
Kirim pesanan, yang menentukan detail koneksi Anda.
Kemudian, Google akan mengirimkan email konfirmasi pesanan kepada Anda. Setelah resource
dialokasikan, Anda akan menerima email lain yang berisi LOA-CFA.
Kirim LOA-CFA ke vendor Anda. Server menyediakan koneksi antara peering edge Google dan jaringan lokal Anda. Google
akan otomatis mulai menguji tingkat cahaya di setiap port yang dialokasikan setelah
24 jam.
Setelah koneksi siap digunakan, Anda perlu menghubungkan
jaringan satu sama lain. Untuk melakukannya, buat jaringan lintas situs melalui koneksi Anda, dengan menentukan properti kabel atau kabel di antara jaringan Anda, termasuk bandwidth-nya.
Setelah membuat jaringan lintas situs dengan satu atau beberapa grup kabel, untuk mulai mengirim traffic antar-situs, Anda harus mengonfigurasi router lokal untuk membuat konektivitas satu sama lain.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-08-12 UTC."],[],[],null,["# Cross-Site Interconnect provisioning overview\n\nThis page describes the steps to successfully create and configure\nCross-Site Interconnect.\n|\n| **Preview**\n|\n|\n| This product is subject to the \"Pre-GA Offerings Terms\" in the General Service Terms section\n| of the [Service Specific Terms](/terms/service-terms#1).\n|\n| Pre-GA products are available \"as is\" and might have limited support.\n|\n| For more information, see the\n| [launch stage descriptions](/products#product-launch-stages).\n| **Note:** For definitions of terms used on this page, see [Cloud Interconnect key\n| terms](/network-connectivity/docs/interconnect/concepts/terminology).\n\nTo create and configure a Cloud Interconnect connection and create\na cross-site network, follow these steps:\n\n1. [Check bandwidth quotas and limits](/network-connectivity/docs/interconnect/how-to/cross-site/check-bandwidth-quota)\n\n Check your quota to ensure that you have enough bandwidth to support your\n expected traffic between metros. If you need more quota, you must request an increase\n before proceeding. Similarly, check the limit for the maximum bandwidth\n per wire and request an exception if necessary.\n2. [Order Cross-Site Interconnect connections](/network-connectivity/docs/interconnect/how-to/cross-site/order-connections)\n\n Submit an order, specifying the details of your connections.\n Google then emails you an order confirmation. After your resources have been\n allocated, you receive another email with your LOA-CFAs.\n3. [Retrieve LOA-CFAs](/network-connectivity/docs/interconnect/how-to/cross-site/retrieve-loas)\n\n Send the LOA-CFAs to your vendor. They provision the connections between\n the Google peering edge and your on-premises network. Google\n automatically starts testing the light levels on each allocated port after\n 24 hours.\n4. [Test the connections](/network-connectivity/docs/interconnect/how-to/cross-site/test-connections)\n\n Follow the recommended steps to verify that your networks are connected\n to Google's network.\n5. [Create a cross-site network](/network-connectivity/docs/interconnect/how-to/cross-site/create-network)\n\n When your connections are ready to use, you need to connect\n your networks to each other. To do that,\n create a cross-site network over your connections, specifying the properties\n of the wire or wires between your networks, including their bandwidth.\n6. [Configure on-premises routers](/network-connectivity/docs/interconnect/how-to/cross-site/configure-onprem-routers)\n\n After you create a cross-site network with one or more wire groups, to start\n sending traffic between your sites, you need to configure your on-premises\n routers to establish connectivity with each other."]]
