Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Ada dua bagian untuk memulai database Oracle Anda dengan Backup dan DR, yaitu menambahkan host server Oracle ke konsol pengelolaan, lalu menemukan database Oracle.
Tambahkan host
Tambahkan host ke konsol pengelolaan. Jika host sudah ditambahkan, edit host dan pastikan untuk menyetel semua konfigurasi dengan benar.
Klik Kelola>Host, lalu klik + Tambahkan Host.
Di halaman Tambahkan Host, selesaikan langkah-langkah berikut:
Name: Berikan nama server database.
Alamat IP: Berikan IP server database dan klik
tanda plus (+).
Peralatan: Pilih kotak centang untuk peralatan.
Jenis Host: Pastikan ini adalah Umum.
Klik Tambahkan untuk menambahkan host. Penyelenggara ditambahkan.
Klik kanan host, lalu pilih Edit.
Biarkan Staging Disk Format sebagai Block.
Masukkan nama pengguna dan sandi yang Anda siapkan sebelumnya di
Kredensial Penemuan Aplikasi.
Pilih Save.
Menemukan dan melindungi aplikasi database Oracle
Gunakan petunjuk ini untuk menemukan dan melindungi aplikasi database:
Klik Pengelola Aplikasi>Aplikasi, lalu pilih
Tambahkan Aplikasi.
Pilih Oracle di wizard Add Application.
Ikuti wizard. Di bagian Pilih, pilih database yang akan dicadangkan,
lalu di bagian Kelola, terapkan template kebijakan dan
profil resource yang Anda buat di
Menentukan template kebijakan dan profil resource.
Anda dapat melihat database dalam daftar Aplikasi Pengelola Aplikasi dengan
perisai hijau yang menunjukkan bahwa paket pencadangan telah diterapkan.
Aplikasi mungkin tidak direkam hingga tugas terjadwal berjalan sesuai dengan jam operasional yang ditentukan dalam template cadangan. Misalnya, jika pada pukul 10.00 (UTC) Anda menetapkan template yang memiliki jam operasional dari pukul 02.00 (UTC) hingga 05.00 (UTC), maka tugas pertama tidak akan dimulai hingga perangkat memiliki slot tugas yang tersedia pada pukul 02.00 (UTC) pada hari berikutnya. Untuk menjalankan tugas
segera, lakukan
pengambilan gambar sesuai permintaan.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-08-18 UTC."],[[["\u003cp\u003eThe initial setup for Oracle databases with Backup and DR involves adding the Oracle server host to the management console and subsequently discovering the Oracle databases.\u003c/p\u003e\n"],["\u003cp\u003eAdding the host requires navigating to "Manage" > "Hosts," providing the host's name, IP address, selecting the relevant appliance, setting the host type to "Generic," configuring staging disk format, and entering application discovery credentials.\u003c/p\u003e\n"],["\u003cp\u003eTo discover and protect databases, you must go to "App Manager" > "Applications," select "Oracle," choose the database for backup, apply a policy template and resource profile, and configure the backup capture method.\u003c/p\u003e\n"],["\u003cp\u003eAfter saving application settings, the database will appear in the "App Manager Applications" list with a green shield once the backup plan is applied, although the initial capture might be delayed according to the defined hours of operation.\u003c/p\u003e\n"],["\u003cp\u003eA variety of resources and operations are available for managing and protecting Oracle databases, such as various guides for different parts of the process, including how to mount, recover, or perform an instant recovery.\u003c/p\u003e\n"]]],[],null,["# Discover and protect the Oracle database application\n\nThere are two parts to getting your Oracle databases started with\nBackup and DR, adding the Oracle server host to the management\nconsole, and then discovering the Oracle databases.\n\nAdd the host\n------------\n\nAdd the host to the management console. If the host is already added, then\nedit the host and make sure to set all the configurations correctly.\n| **Note:** If you have added the Windows server to Backup and DR as a Compute Engine instance or as a VMware VM, then a host for this VM already exists and you don't need to add it again using the following procedure. Instead find and edit that host.\n\n1. Click **Manage** \\\u003e **Hosts** , then click **+ Add Host**.\n\n2. On the **Add Host** page complete the following:\n\n - **Name**: Provide the database server name.\n\n - **IP Address** : Provide the database server IP and click the\n **plus sign (+)**.\n\n - **Appliances**: Select the checkbox for the appliance.\n\n - **Host Type** : Make sure this is **Generic**.\n\n3. Click **Add** to add the host. The host is added.\n\n4. Right-click the host and select **Edit**.\n\n5. Leave the **Staging Disk Format** as **Block**.\n\n6. Enter the username and password that you set up previous in\n **Application Discovery Credentials**.\n\n7. Select **Save**.\n\nDiscover and protect the Oracle database application\n----------------------------------------------------\n\nUse these instructions to discover and protect the database applications:\n\n1. Click **App Manager** \\\u003e **Applications** , then select\n **Add Application**.\n\n2. Select **Oracle** in the **Add Application** wizard.\n\n3. Follow the wizard. In the **Select** section, select the database to back up,\n and then in the **Manage** section, apply the policy template and the\n resource profile that you created in\n [Define policy templates and resource profiles](/backup-disaster-recovery/docs/concepts/backup-plan-policy-best-practices).\n\n4. To protect the database logs, see [Database log protection in a backup plan policy](/backup-disaster-recovery/docs/concepts/backup-plan-policy-best-practices#Log-protection).\n\n5. Click **Application Settings** in the **Configure** section.\n\n6. Select the backup capture method based on your needs and the information in\n [Protect the Oracle environment against data loss, errors, and corruption](/backup-disaster-recovery/docs/concepts/oracle-intro)\n in the **Application Settings** window.\n\n In the **Application Settings** tab, you can change\n [application-specific settings](/backup-disaster-recovery/docs/create-plan/oracle-advanced-settings).\n7. Click **Save** , then **Next** , then **Finish**.\n\n8. You can see the database in the **App Manager Applications** list with a\n green shield indicating that the backup plan has been applied.\n\nThe application may not be captured until the scheduled job runs according\nto the hours of operation defined in the backup template. For example, if at\n10:00 (UTC) you assign a template that has hours of operation from 02:00 (UTC)\nto 05:00 (UTC), then the first job doesn't start until the appliance has an\navailable job slot at 02:00 (UTC) of the following day. To run a job\nimmediately, perform an\n[on-demand capture](/backup-disaster-recovery/docs/monitor-reports/monitor-jobs#run).\n\nYou don't have to apply a backup plan right now. If you want to perform this\nstep later, see\n[Back up a discovered Oracle database](/backup-disaster-recovery/docs/backup/oracle-db-protect).\n| **Note:** For best performance, be sure to review the [Oracle patches and known issues](/backup-disaster-recovery/docs/concepts/oracle-patches-known-issues).\n\nThe Oracle DBA Guide\n--------------------\n\n- [Backup and DR for Oracle databases](/backup-disaster-recovery/docs/concepts/oracle-intro)\n- [Prerequisites for protecting an Oracle database](/backup-disaster-recovery/docs/configuration/oracle-db-prerequisites)\n- [Oracle patches and known issues](/backup-disaster-recovery/docs/concepts/oracle-patches-known-issues)\n- [Prepare Oracle databases for protection](/backup-disaster-recovery/docs/configuration/oracle-db-prepare)\n- [Discover and protect an Oracle database](/backup-disaster-recovery/docs/configuration/discover-and-protect-oracle)\n- [Details and settings for Oracle databases](/backup-disaster-recovery/docs/create-plan/oracle-advanced-settings)\n- [Use dNFS with Backup and DR](/backup-disaster-recovery/docs/configuration/oracle-dnfs)\n- [Protect a discovered Oracle database](/backup-disaster-recovery/docs/backup/oracle-db-protect)\n- [Mount an Oracle database as a standard mount](/backup-disaster-recovery/docs/access-data/oracle-mount)\n- [Create an instant virtual copy of an Oracle database](/backup-disaster-recovery/docs/access-data/oracle-mount-virtualdb)\n- [Restore and recover an Oracle database](/backup-disaster-recovery/docs/restore-data/restore-oracle)\n- [Instant recovery of an Oracle database using Mount and Migrate](/backup-disaster-recovery/docs/restore-data/oracle-mm)\n- [Provision an environment with a Backup and DR workflow](/backup-disaster-recovery/docs/access-data/create-workflow-oracle)"]]
