Memasang database Oracle sebagai pemasangan standar
Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Anda dapat memasang gambar cadangan database Oracle sebagai pemasangan standar atau sebagai
database virtual—pemasangan yang kompatibel dengan aplikasi.
Memasang image database Oracle yang dilindungi dalam grup disk ASM untuk akses data
Gunakan petunjuk ini untuk memasang image database Oracle untuk akses data:
Buka konsol pengelolaan ke Pengelola Aplikasi>Aplikasi dan masukkan nama aplikasi database atau gunakan filter
untuk mempermudah mendapatkan image database yang Anda butuhkan.
Klik kanan aplikasi, lalu pilih Akses.
Di halaman Access, pilih gambar, lalu klik Mount
di menu Mount.
Di halaman Mount, isi informasi yang diperlukan.
Di bagian Target, pilih host untuk memasang database baru,
lalu berikan Label sesuai kebutuhan. Tindakan tersebut bersifat opsional.
Di bagian Application Options, hapus centang Create New Virtual Application.
Buka Opsi Pemetaan dengan mengklik ikon panah di sebelah kiri judul.
Jika diperlukan, ubah Kumpulan penyimpanan default yang akan digunakan untuk pemasangan
dari daftar drop-down. Setelan ini hanya berlaku untuk pemasangan yang tidak memiliki
disk penyiapan yang ada, seperti langsung ke OnVault dan image OnVault yang diimpor, jika tidak, pool tempat disk image sumber berada akan selalu digunakan terlepas dari apa yang ditetapkan di sini.
LOKASI PEMASANGAN: Masukkan jalur pemasangan tempat memasang image cadangan log.
Jika log dilindungi oleh Backup and DR, image log akan di-mount ke <mountpath>_archivelog_Log, dan image log berikutnya ke <mountpath>_archivelog_Log1, atau <mountpath>_archivelog_Log2.
Jika tidak ada jalur pemasangan yang ditentukan, image cadangan database Oracle dan image cadangan log akan dipasang ke jalur yang dibuat secara default /act/mnt/(jobid)_mountpoint_<random generated number>
NAMA GRUP DISK
Masukkan nama grup disk tempat memasang image cadangan database di bawah ASM.
Image database Oracle di-mount ke ASM dengan nama grup disk yang ditentukan di bagian Disk Group Name.
DAFTAR NODE RAC:
Jika kosong, image cadangan akan di-mount ke alamat IP host yang dipilih.
Untuk menyediakan database RAC di cluster RAC target, tentukan alamat IP semua node untuk cluster RAC target yang dipisahkan dengan titik dua (:).
Klik Kirim. Anda dapat membuka Pemantau Tugas untuk
melihat progres dan detail tugas. Image yang terpasang tersedia di Pemasangan Aktif.
Memasang image database Oracle yang dilindungi di bawah sistem file untuk akses data
Gunakan petunjuk ini untuk memasang image database Oracle untuk akses data:
Dari konsol pengelolaan Layanan pencadangan dan DR, klik
Pengelola Aplikasi>Aplikasi untuk membuka halaman
Aplikasi, lalu masukkan nama aplikasi database atau gunakan
filter untuk menemukan image database yang Anda butuhkan.
Klik kanan aplikasi, lalu pilih Akses.
Di halaman Access, pilih gambar, lalu klik Mount
di menu Mount.
Di halaman Mount, isi informasi yang diperlukan.
Di bagian Target, pilih host untuk database yang baru di-mount.
Informasi yang diminta akan berubah bergantung pada jenis host yang dipilih.
Buka Opsi Pemetaan dengan mengklik ikon panah di sebelah kiri judul.
Jika diperlukan, ubah Kumpulan penyimpanan default yang akan digunakan untuk pemasangan
dari daftar drop-down. Setelan ini hanya berlaku untuk pemasangan yang tidak memiliki
disk penyiapan yang ada, seperti Direct to OnVault dan image OnVault yang diimpor
, jika tidak, pool tempat disk image sumber berada akan
selalu digunakan terlepas dari apa yang ditetapkan di sini.
LOKASI PEMASANGAN: Masukkan jalur pemasangan tempat database dan
image cadangan log akan dipasang:
Image cadangan database Oracle dipasang ke jalur pemasangan yang ditentukan
/<mountpath>.
Jika log dilindungi oleh Backup and DR, maka image log akan di-mount ke
<mountpath>_archivelog_Log, dan image log berikutnya ke
nama archivelog yang sama dengan nomor yang bertambah di akhir, misalnya,
<mountpath>_archivelog_Log1.
Jika tidak ada jalur pemasangan yang ditentukan, image cadangan database Oracle dan image cadangan log akan dipasang ke jalur yang dibuat secara default /act/mnt/(jobid)_mountpoint_<random generated number>.
Centang Kirim untuk mengirimkan tugas. Anda dapat membuka Job Monitor untuk melihat progres dan detail tugas. Image yang di-mount tersedia di Active Mounts.
Pengelolaan pemasangan aktif
Setelah membuat pemasangan, Anda dapat melacak image dari
App Manager > Active Mounts. Idealnya, jangan biarkan gambar terpasang tanpa batas waktu. Hal ini karena image cadangan yang digunakan untuk membuat pemasangan,
tidak dapat berakhir hingga semua pemasangannya dihapus. Setelah selesai menggunakan gambar yang terpasang, Anda dapat:
Lepaskan
gambar. Anda dapat memasang ulang
jika diperlukan. Kemudian, Anda dapat menghapus
image tersebut nanti jika Anda yakin bahwa image tersebut tidak diperlukan lagi.
Lepaskan dan hapus
image. Tindakan ini akan menghapus gambar yang terpasang, bukan cadangan yang menjadi dasar pemasangan.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-08-18 UTC."],[[["\u003cp\u003eThis guide details the process of mounting backup images of Oracle databases for data access, covering both ASM disk group and file system protected images.\u003c/p\u003e\n"],["\u003cp\u003eMounts can be done as a standard mount or as an application aware mount which is a virtual database, with the latter's procedure linked for detailed instructions.\u003c/p\u003e\n"],["\u003cp\u003eWhen mounting an Oracle database image, users need to specify target host, optional labels, and can configure storage pool and mount locations.\u003c/p\u003e\n"],["\u003cp\u003eActive mounts can be tracked via the App Manager, and it's recommended to unmount and/or delete images when they are no longer needed to prevent backup image expiration.\u003c/p\u003e\n"],["\u003cp\u003eThe default mount path is generated automatically if you do not specify a custom location.\u003c/p\u003e\n"]]],[],null,["# Mount an Oracle database as a standard mount\n\nYou can mount backup images of an Oracle database as a standard mount or as a\nvirtual database---application aware mount.\n\nThis is the procedure for a standard mount. To make a virtual\ndatabase---application aware mount---see the procedure in\n[Mount an Oracle database as a virtual database](/backup-disaster-recovery/docs/access-data/oracle-mount-virtualdb).\n| **Note:** OnVault pools pointing to backup vaults don't support mount operations.\n\nMount an Oracle database image protected under an ASM disk group for data access\n--------------------------------------------------------------------------------\n\nUse these instructions to mount an Oracle database image for data access:\n\n1. Open the management console to the **App Manager** \\\u003e\n **Applications** and enter the database application name or use the filters\n to make it easier to get to the database image that you need.\n\n2. Right-click the application and select **Access**.\n\n3. On the **Access** page, select the image and click **Mount**\n under the **Mount** menu.\n\n4. On the **Mount** page, fill in the required information.\n\n - Under **Target** , select a host to mount the new database on,\n and provide a **Label** as needed. This is optional.\n\n - Under **Application Options** , clear **Create New Virtual Application**.\n\n If you want to create an application aware mount,\n see [Mount an Oracle database as a virtual database](/backup-disaster-recovery/docs/access-data/oracle-mount-virtualdb).\n - Open the **Mapping Options** by clicking on the arrow icon to\n the left of the title.\n\n - If required, change the default **Storage pool** to be used for the mount\n from the drop-down list. This only applies to mounts where there is no\n existing staging disk, such as direct to OnVault and imported OnVault\n images, otherwise the pool where the source image disks are located is\n always used regardless of what is set here.\n\n - **MOUNT LOCATION**: Enter the mount path where to mount the log backup\n image.\n\n - If logs are Backup and DR protected, then the logs image is mounted to `\u003cmountpath\u003e_archivelog_Log`, and subsequent logs images to `\u003cmountpath\u003e_archivelog_Log1`, or `\u003cmountpath\u003e_archivelog_Log2`.\n - If no mount path is specified, the Oracle database backup image and the log backup image are mounted to a default generated path `/act/mnt/(jobid)_mountpoint_\u003crandom generated number\u003e`\n - **DISK GROUP NAME**\n\n - Enter a diskgroup name where to mount the database backup image under ASM. The Oracle database image is mounted to ASM with a disk group name specified under **Disk Group Name**.\n - **RAC NODE LIST**:\n\n - If empty, the backup image is mounted to the selected host's IP address.\n - To provision a RAC database on the target RAC cluster, specify the IP address of all nodes for the target RAC cluster separated by a colon (:).\n\n | **Note:** To create a virtual application (application-aware mount) as a RAC database, specify the IP address of all nodes for the target RAC cluster separated by a colon (:) in the order of RAC nodes. The first IP address in the RAC Node list must be the selected host's IP address in the ASM details.\n5. Click **Submit** . You can go to the **Job Monitor** to\n view the progress and details of the job. The mounted image is\n available in the [Active Mounts](#active).\n\nMount an Oracle database image protected under a file system for data access\n----------------------------------------------------------------------------\n\nUse these instructions to mount an Oracle database image for data access:\n\n1. From the Backup and DR Service management console, click\n **App Manager** \\\u003e **Applications** to open the\n **Applications** page, then enter the database application name or use the\n filters to find the database image that you need.\n\n2. Right-click the application and select **Access**.\n\n3. On the **Access** page, select the image and click **Mount**\n under the **Mount** menu.\n\n4. On the **Mount** page, fill in the required information.\n\n - Under **Target**, select the host for the newly mounted database.\n The requested information changes depending on what type of host was\n selected.\n\n - Optionally, provide a label as needed.\n\n - Deselect **Create New Virtual Application** . If you want to make\n an application aware mount, then follow the procedure in\n [Mount an Oracle database as a virtual application](/backup-disaster-recovery/docs/access-data/oracle-mount-virtualdb).\n\n - Open the **Mapping Options** by clicking on the arrow icon to\n the left of the title.\n\n - If required, change the default **Storage pool** to be used for the mount\n from the drop-down list. This only applies to mounts where there is no\n existing staging disk, such as Direct to OnVault and imported OnVault\n images, otherwise the pool where the source image disks are located are\n always used regardless of what is set here.\n\n - **MOUNT LOCATION**: Enter the mount path where to mount the database and\n log backup image:\n\n - The Oracle database backup image is mounted to the specified mount path `/\u003cmountpath\u003e`.\n\n | **Note:** \n | If the path exists as an empty folder, the Backup and DR agent uses it. \n | If it does not exist, the Backup and DR agent creates it. \n | If it exists as a file or as a folder that is not empty, then the job fails.\n - If logs are Backup and DR protected, then the logs image are mounted to\n `\u003cmountpath\u003e_archivelog_Log`, and subsequent logs images to the same\n archivelog name with a increasing number at the end, for example,\n `\u003cmountpath\u003e_archivelog_Log1`.\n\n - If no mount path is specified the Oracle database backup image and log\n backup image is mounted to a default generated path\n `/act/mnt/(jobid)_mountpoint_\u003crandom generated number\u003e`.\n\n5. Check **Submit** to submit the job. You can go to the **Job Monitor** to\n view the progress and details of the job The mounted image is\n available in the [Active Mounts](#active).\n\nManagement of the active mounts\n-------------------------------\n\nOnce you have created a mount, you can track the image form the\n**App Manager** \\\u003e **Active Mounts**. Ideally, don't leave any image mounted\nindefinitely. This is because the backup image that the mount was created from,\ncannot expire until all its mounts have been deleted. When you have finished\nusing the mounted image then either:\n\n- [Unmount](/backup-disaster-recovery/docs/access-data/manage-active-mounts#unmount) the image. You can [remount](/backup-disaster-recovery/docs/access-data/manage-active-mounts#remount) it if needed. You can then [delete](/backup-disaster-recovery/docs/access-data/manage-active-mounts#delete) the image later when you are certain it is no longer needed.\n- [Unmount and delete](/backup-disaster-recovery/docs/access-data/manage-active-mounts#unmount-delete) the image. This deletes the mounted image, not the backup that the mount is based on.\n\nThe Oracle DBA guide\n--------------------\n\n- [Backup and DR for Oracle databases](/backup-disaster-recovery/docs/concepts/oracle-intro)\n- [Prerequisites for protecting an Oracle database](/backup-disaster-recovery/docs/configuration/oracle-db-prerequisites)\n- [Oracle patches and known issues](/backup-disaster-recovery/docs/concepts/oracle-patches-known-issues)\n- [Prepare Oracle databases for protection](/backup-disaster-recovery/docs/configuration/oracle-db-prepare)\n- [Discover and protect an Oracle database](/backup-disaster-recovery/docs/configuration/discover-and-protect-oracle)\n- [Details and settings for Oracle databases](/backup-disaster-recovery/docs/create-plan/oracle-advanced-settings)\n- [Use dNFS with Backup and DR](/backup-disaster-recovery/docs/configuration/oracle-dnfs)\n- [Protect a discovered Oracle database](/backup-disaster-recovery/docs/backup/oracle-db-protect)\n- [Mount an Oracle database as a standard mount](/backup-disaster-recovery/docs/access-data/oracle-mount)\n- [Create an instant virtual copy of an Oracle database](/backup-disaster-recovery/docs/access-data/oracle-mount-virtualdb)\n- [Restore and recover an Oracle database](/backup-disaster-recovery/docs/restore-data/restore-oracle)\n- [Instant recovery of an Oracle database using Mount and Migrate](/backup-disaster-recovery/docs/restore-data/oracle-mm)\n- [Provision an environment with a Backup and DR workflow](/backup-disaster-recovery/docs/access-data/create-workflow-oracle)"]]
