Pengekspor Node

Dokumen ini menjelaskan cara mengonfigurasi deployment Google Kubernetes Engine Anda sehingga Anda dapat menggunakan Google Cloud Managed Service for Prometheus untuk mengumpulkan metrik dari Node Exporter. Dokumen ini menunjukkan cara melakukan hal berikut:

  • Siapkan Node Exporter untuk melaporkan metrik.
  • Konfigurasi resource PodMonitoring untuk Managed Service for Prometheus guna mengumpulkan metrik yang diekspor.
  • Akses dasbor di Cloud Monitoring untuk melihat metrik.
  • Konfigurasi aturan pemberitahuan untuk memantau metrik.

Petunjuk ini hanya berlaku jika Anda menggunakan koleksi terkelola dengan Managed Service for Prometheus. Jika Anda menggunakan pengumpulan yang di-deploy sendiri, lihat repositori sumber untuk Node Exporter guna mengetahui informasi penginstalan.

Petunjuk ini diberikan sebagai contoh dan diharapkan berfungsi di sebagian besar lingkungan Kubernetes. Jika Anda mengalami masalah saat menginstal aplikasi atau eksportir karena kebijakan keamanan atau organisasi yang ketat, sebaiknya lihat dokumentasi open source untuk mendapatkan dukungan.

Prasyarat

Untuk mengumpulkan metrik dari Node Exporter dengan menggunakan Managed Service for Prometheus dan pengumpulan terkelola, deployment Anda harus memenuhi persyaratan berikut:

  • Cluster Anda harus menjalankan Google Kubernetes Engine versi 1.21.4-gke.300 atau yang lebih baru.
  • Anda harus menjalankan Managed Service for Prometheus dengan koleksi terkelola yang diaktifkan. Untuk mengetahui informasi selengkapnya, lihat Mulai menggunakan koleksi terkelola.

  • Untuk menggunakan dasbor yang tersedia di Cloud Monitoring untuk integrasi, Anda harus menggunakan node_exporter versi 1.3.1 atau yang lebih baru.

    Untuk mengetahui informasi selengkapnya tentang dasbor yang tersedia, lihat Menginstal dasbor.

Metrik ini sudah diaktifkan untuk node di cluster Autopilot GKE.

Instal Node Exporter

Anda dapat menggunakan konfigurasi berikut untuk menginstal Node Exporter:

# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: apps/v1
kind: DaemonSet
metadata:
  namespace: gmp-public
  name: node-exporter
  labels:
    app.kubernetes.io/name: node-exporter
    app.kubernetes.io/version: 1.8.2
spec:
  selector:
    matchLabels:
      app.kubernetes.io/name: node-exporter
  updateStrategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 10%
  template:
    metadata:
      labels:
        app.kubernetes.io/name: node-exporter
        app.kubernetes.io/version: 1.8.2
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/arch
                operator: In
                values:
                - arm64
                - amd64
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      containers:
      - name: node-exporter
        image: quay.io/prometheus/node-exporter:v1.8.2
        args:
        - --web.listen-address=:8080
        - --path.sysfs=/host/sys
        - --path.rootfs=/host/root
        - --no-collector.wifi
        - --no-collector.hwmon
        - --collector.filesystem.ignored-mount-points=^/(dev|proc|sys|var/lib/docker/.+|var/lib/kubelet/pods/.+)($|/)
        - --collector.netclass.ignored-devices=^(veth.*)$
        - --collector.netdev.device-exclude=^(veth.*)$
        ports:
        - name: metrics
          containerPort: 8080
        resources:
          limits:
            memory: 180Mi
          requests:
            cpu: 102m
            memory: 180Mi
        volumeMounts:
        - mountPath: /host/sys
          mountPropagation: HostToContainer
          name: sys
          readOnly: true
        - mountPath: /host/root
          mountPropagation: HostToContainer
          name: root
          readOnly: true
      hostNetwork: true
      hostPID: true
      securityContext:
        runAsNonRoot: true
        runAsUser: 65534
      volumes:
      - hostPath:
          path: /sys
        name: sys
      - hostPath:
          path: /
        name: root
---
apiVersion: monitoring.googleapis.com/v1
kind: PodMonitoring
metadata:
  namespace: gmp-public
  name: node-exporter
  labels:
    app.kubernetes.io/name: node-exporter
    app.kubernetes.io/part-of: google-cloud-managed-prometheus
spec:
  selector:
    matchLabels:
      app.kubernetes.io/name: node-exporter
  endpoints:
  - port: metrics
    interval: 30s

Untuk menerapkan perubahan konfigurasi dari file lokal, jalankan perintah berikut: 

kubectl apply -f FILE_NAME

Anda juga dapat menggunakan Terraform untuk mengelola konfigurasi.

Menentukan aturan dan pemberitahuan

Anda dapat menggunakan konfigurasi Rules berikut untuk menentukan pemberitahuan pada metrik Anda:

# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

apiVersion: monitoring.googleapis.com/v1
kind: Rules
metadata:
  namespace: gmp-public
  name: node-exporter-rules
  labels:
    app.kubernetes.io/component: rules
    app.kubernetes.io/name: node-exporter-rules
    app.kubernetes.io/part-of: google-cloud-managed-prometheus
spec:
  groups:
  - name: node-exporter
    interval: 30s
    rules:
    - alert: NodeFilesystemSpaceFillingUp
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available space left and is filling
          up.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemspacefillingup
        summary: Filesystem is predicted to run out of space within the next 24 hours.
      expr: |
        (
          node_filesystem_avail_bytes{job="node-exporter",fstype!=""} / node_filesystem_size_bytes{job="node-exporter",fstype!=""} * 100 < 15
        and
          predict_linear(node_filesystem_avail_bytes{job="node-exporter",fstype!=""}[6h], 24 * 60 * 60) < 0
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 1h
      labels:
        severity: warning
    - alert: NodeFilesystemSpaceFillingUp
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available space left and is filling
          up fast.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemspacefillingup
        summary: Filesystem is predicted to run out of space within the next 4 hours.
      expr: |
        (
          node_filesystem_avail_bytes{job="node-exporter",fstype!=""} / node_filesystem_size_bytes{job="node-exporter",fstype!=""} * 100 < 10
        and
          predict_linear(node_filesystem_avail_bytes{job="node-exporter",fstype!=""}[6h], 4*60*60) < 0
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 1h
      labels:
        severity: critical
    - alert: NodeFilesystemAlmostOutOfSpace
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available space left.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemalmostoutofspace
        summary: Filesystem has less than 5% space left.
      expr: |
        (
          node_filesystem_avail_bytes{job="node-exporter",fstype!=""} / node_filesystem_size_bytes{job="node-exporter",fstype!=""} * 100 < 5
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 30m
      labels:
        severity: warning
    - alert: NodeFilesystemAlmostOutOfSpace
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available space left.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemalmostoutofspace
        summary: Filesystem has less than 3% space left.
      expr: |
        (
          node_filesystem_avail_bytes{job="node-exporter",fstype!=""} / node_filesystem_size_bytes{job="node-exporter",fstype!=""} * 100 < 3
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 30m
      labels:
        severity: critical
    - alert: NodeFilesystemFilesFillingUp
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available inodes left and is filling
          up.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemfilesfillingup
        summary: Filesystem is predicted to run out of inodes within the next 24 hours.
      expr: |
        (
          node_filesystem_files_free{job="node-exporter",fstype!=""} / node_filesystem_files{job="node-exporter",fstype!=""} * 100 < 40
        and
          predict_linear(node_filesystem_files_free{job="node-exporter",fstype!=""}[6h], 24*60*60) < 0
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 1h
      labels:
        severity: warning
    - alert: NodeFilesystemFilesFillingUp
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available inodes left and is filling
          up fast.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemfilesfillingup
        summary: Filesystem is predicted to run out of inodes within the next 4 hours.
      expr: |
        (
          node_filesystem_files_free{job="node-exporter",fstype!=""} / node_filesystem_files{job="node-exporter",fstype!=""} * 100 < 20
        and
          predict_linear(node_filesystem_files_free{job="node-exporter",fstype!=""}[6h], 4*60*60) < 0
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 1h
      labels:
        severity: critical
    - alert: NodeFilesystemAlmostOutOfFiles
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available inodes left.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemalmostoutoffiles
        summary: Filesystem has less than 5% inodes left.
      expr: |
        (
          node_filesystem_files_free{job="node-exporter",fstype!=""} / node_filesystem_files{job="node-exporter",fstype!=""} * 100 < 5
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 1h
      labels:
        severity: warning
    - alert: NodeFilesystemAlmostOutOfFiles
      annotations:
        description: Filesystem on {{ $labels.device }} at {{ $labels.instance }}
          has only {{ printf "%.2f" $value }}% available inodes left.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefilesystemalmostoutoffiles
        summary: Filesystem has less than 3% inodes left.
      expr: |
        (
          node_filesystem_files_free{job="node-exporter",fstype!=""} / node_filesystem_files{job="node-exporter",fstype!=""} * 100 < 3
        and
          node_filesystem_readonly{job="node-exporter",fstype!=""} == 0
        )
      for: 1h
      labels:
        severity: critical
    - alert: NodeNetworkReceiveErrs
      annotations:
        description: '{{ $labels.instance }} interface {{ $labels.device }} has encountered
          {{ printf "%.0f" $value }} receive errors in the last two minutes.'
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodenetworkreceiveerrs
        summary: Network interface is reporting many receive errors.
      expr: |
        rate(node_network_receive_errs_total[2m]) / rate(node_network_receive_packets_total[2m]) > 0.01
      for: 1h
      labels:
        severity: warning
    - alert: NodeNetworkTransmitErrs
      annotations:
        description: '{{ $labels.instance }} interface {{ $labels.device }} has encountered
          {{ printf "%.0f" $value }} transmit errors in the last two minutes.'
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodenetworktransmiterrs
        summary: Network interface is reporting many transmit errors.
      expr: |
        rate(node_network_transmit_errs_total[2m]) / rate(node_network_transmit_packets_total[2m]) > 0.01
      for: 1h
      labels:
        severity: warning
    - alert: NodeHighNumberConntrackEntriesUsed
      annotations:
        description: '{{ $value | humanizePercentage }} of conntrack entries are used.'
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodehighnumberconntrackentriesused
        summary: Number of conntrack are getting close to the limit.
      expr: |
        (node_nf_conntrack_entries / node_nf_conntrack_entries_limit) > 0.75
      labels:
        severity: warning
    - alert: NodeTextFileCollectorScrapeError
      annotations:
        description: Node Exporter text file collector failed to scrape.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodetextfilecollectorscrapeerror
        summary: Node Exporter text file collector failed to scrape.
      expr: |
        node_textfile_scrape_error{job="node-exporter"} == 1
      labels:
        severity: warning
    - alert: NodeClockSkewDetected
      annotations:
        description: Clock on {{ $labels.instance }} is out of sync by more than 300s.
          Ensure NTP is configured correctly on this host.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodeclockskewdetected
        summary: Clock skew detected.
      expr: |
        (
          node_timex_offset_seconds{job="node-exporter"} > 0.05
        and
          deriv(node_timex_offset_seconds{job="node-exporter"}[5m]) >= 0
        )
        or
        (
          node_timex_offset_seconds{job="node-exporter"} < -0.05
        and
          deriv(node_timex_offset_seconds{job="node-exporter"}[5m]) <= 0
        )
      for: 10m
      labels:
        severity: warning
    - alert: NodeClockNotSynchronising
      annotations:
        description: Clock on {{ $labels.instance }} is not synchronising. Ensure
          NTP is configured on this host.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodeclocknotsynchronising
        summary: Clock not synchronising.
      expr: |
        min_over_time(node_timex_sync_status{job="node-exporter"}[5m]) == 0
        and
        node_timex_maxerror_seconds{job="node-exporter"} >= 16
      for: 10m
      labels:
        severity: warning
    - alert: NodeRAIDDegraded
      annotations:
        description: RAID array '{{ $labels.device }}' on {{ $labels.instance }} is
          in degraded state due to one or more disks failures. Number of spare drives
          is insufficient to fix issue automatically.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/noderaiddegraded
        summary: RAID Array is degraded
      expr: |
        node_md_disks_required{job="node-exporter",device=~"(/dev/)?(mmcblk.p.+|nvme.+|rbd.+|sd.+|vd.+|xvd.+|dm-.+|dasd.+)"} - ignoring (state) (node_md_disks{state="active",job="node-exporter",device=~"(/dev/)?(mmcblk.p.+|nvme.+|rbd.+|sd.+|vd.+|xvd.+|dm-.+|dasd.+)"}) > 0
      for: 15m
      labels:
        severity: critical
    - alert: NodeRAIDDiskFailure
      annotations:
        description: At least one device in RAID array on {{ $labels.instance }} failed.
          Array '{{ $labels.device }}' needs attention and possibly a disk swap.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/noderaiddiskfailure
        summary: Failed device in RAID array
      expr: |
        node_md_disks{state="failed",job="node-exporter",device=~"(/dev/)?(mmcblk.p.+|nvme.+|rbd.+|sd.+|vd.+|xvd.+|dm-.+|dasd.+)"} > 0
      labels:
        severity: warning
    - alert: NodeFileDescriptorLimit
      annotations:
        description: File descriptors limit at {{ $labels.instance }} is currently
          at {{ printf "%.2f" $value }}%.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefiledescriptorlimit
        summary: Kernel is predicted to exhaust file descriptors limit soon.
      expr: |
        (
          node_filefd_allocated{job="node-exporter"} * 100 / node_filefd_maximum{job="node-exporter"} > 70
        )
      for: 15m
      labels:
        severity: warning
    - alert: NodeFileDescriptorLimit
      annotations:
        description: File descriptors limit at {{ $labels.instance }} is currently
          at {{ printf "%.2f" $value }}%.
        runbook_url: https://runbooks.prometheus-operator.dev/runbooks/node/nodefiledescriptorlimit
        summary: Kernel is predicted to exhaust file descriptors limit soon.
      expr: |
        (
          node_filefd_allocated{job="node-exporter"} * 100 / node_filefd_maximum{job="node-exporter"} > 90
        )
      for: 15m
      labels:
        severity: critical
  - name: node-exporter.rules
    interval: 30s
    rules:
    - expr: |
        count without (cpu, mode) (
          node_cpu_seconds_total{job="node-exporter",mode="idle"}
        )
      record: instance:node_num_cpu:sum
    - expr: |
        1 - avg without (cpu) (
          sum without (mode) (rate(node_cpu_seconds_total{job="node-exporter", mode=~"idle|iowait|steal"}[5m]))
        )
      record: instance:node_cpu_utilisation:rate5m
    - expr: |
        (
          node_load1{job="node-exporter"}
        /
          instance:node_num_cpu:sum{job="node-exporter"}
        )
      record: instance:node_load1_per_cpu:ratio
    - expr: |
        1 - (
          (
            node_memory_MemAvailable_bytes{job="node-exporter"}
            or
            (
              node_memory_Buffers_bytes{job="node-exporter"}
              +
              node_memory_Cached_bytes{job="node-exporter"}
              +
              node_memory_MemFree_bytes{job="node-exporter"}
              +
              node_memory_Slab_bytes{job="node-exporter"}
            )
          )
        /
          node_memory_MemTotal_bytes{job="node-exporter"}
        )
      record: instance:node_memory_utilisation:ratio
    - expr: |
        rate(node_vmstat_pgmajfault{job="node-exporter"}[5m])
      record: instance:node_vmstat_pgmajfault:rate5m
    - expr: |
        rate(node_disk_io_time_seconds_total{job="node-exporter", device=~"(/dev/)?(mmcblk.p.+|nvme.+|rbd.+|sd.+|vd.+|xvd.+|dm-.+|dasd.+)"}[5m])
      record: instance_device:node_disk_io_time_seconds:rate5m
    - expr: |
        rate(node_disk_io_time_weighted_seconds_total{job="node-exporter", device=~"(/dev/)?(mmcblk.p.+|nvme.+|rbd.+|sd.+|vd.+|xvd.+|dm-.+|dasd.+)"}[5m])
      record: instance_device:node_disk_io_time_weighted_seconds:rate5m
    - expr: |
        sum without (device) (
          rate(node_network_receive_bytes_total{job="node-exporter", device!="lo"}[5m])
        )
      record: instance:node_network_receive_bytes_excluding_lo:rate5m
    - expr: |
        sum without (device) (
          rate(node_network_transmit_bytes_total{job="node-exporter", device!="lo"}[5m])
        )
      record: instance:node_network_transmit_bytes_excluding_lo:rate5m
    - expr: |
        sum without (device) (
          rate(node_network_receive_drop_total{job="node-exporter", device!="lo"}[5m])
        )
      record: instance:node_network_receive_drop_excluding_lo:rate5m
    - expr: |
        sum without (device) (
          rate(node_network_transmit_drop_total{job="node-exporter", device!="lo"}[5m])
        )
      record: instance:node_network_transmit_drop_excluding_lo:rate5m

Untuk menerapkan perubahan konfigurasi dari file lokal, jalankan perintah berikut: 

kubectl apply -f FILE_NAME

Anda juga dapat menggunakan Terraform untuk mengelola konfigurasi.

Untuk mengetahui informasi selengkapnya tentang penerapan aturan ke cluster Anda, lihat Evaluasi dan pemberitahuan aturan terkelola.

Konfigurasi Rules ini diadaptasi dari aturan dan pemberitahuan yang dikontribusikan ke repositori kube-prometheus.

Memverifikasi konfigurasi

Anda dapat menggunakan Metrics Explorer untuk memverifikasi bahwa Anda telah mengonfigurasi Node Exporter dengan benar. Mungkin perlu waktu satu atau dua menit agar Cloud Monitoring dapat menyerap metrik Anda.

Untuk memverifikasi bahwa metrik telah di-ingest, lakukan hal berikut:

  1. Di konsol Google Cloud , buka halaman  Metrics explorer:

    Buka Metrics explorer

    Jika Anda menggunakan kotak penelusuran untuk menemukan halaman ini, pilih hasil yang subjudulnya adalah Monitoring.

  2. Di toolbar panel pembuat kueri, pilih tombol yang namanya  MQL atau  PromQL.
  3. Pastikan PromQL dipilih di tombol Language. Tombol bahasa ada di toolbar yang sama yang memungkinkan Anda memformat kueri.
  4. Masukkan dan jalankan kueri berikut:
    up{job="node-exporter", cluster="CLUSTER_NAME", namespace="gmp-public"}

Menginstal dasbor

Cloud Monitoring menyediakan library contoh dasbor untuk integrasi. Library contoh mencakup dasbor "Prometheus", yang dapat Anda instal untuk melihat data di konsol Google Cloud .

Perhatikan bahwa dasbor Ringkasan Prometheus Cluster Kubernetes memerlukan Kube State Metrics untuk diinstal. Dasbor Kubernetes Pod Prometheus Overview memerlukan Kube State Metrics dan Kubelet/cAdvisor untuk diinstal.

Untuk menginstal dasbor dari library contoh, lakukan hal berikut:

  1. Di konsol Google Cloud , buka halaman  Dasbor:

    Buka Dasbor

    Jika Anda menggunakan kotak penelusuran untuk menemukan halaman ini, pilih hasil yang subjudulnya adalah Monitoring.

  2. Pilih tab Sample Library.
  3. Pilih kategori Lainnya.
  4. (Opsional) Untuk melihat pratinjau statis dasbor tanpa menginstalnya, klik Pratinjau.
  5. Pilih dasbor yang ingin Anda instal, lalu klik  Impor.

Untuk mengetahui informasi selengkapnya tentang cara menginstal dasbor, lihat Menginstal contoh dasbor.

Pemecahan masalah

Untuk mengetahui informasi tentang cara memecahkan masalah penyerapan metrik, lihat Masalah pengumpulan dari eksportir di Memecahkan masalah sisi penyerapan.