Memasang cadangan penyebaran skala SAP HANA sebagai pemasangan standar
Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Dari konsol pengelolaan, Anda dapat memasang image database SAP HANA sebagai pemasangan standar atau sebagai database virtual—pemasangan yang kompatibel dengan aplikasi.
Berikut adalah prosedur untuk pemasangan standar. Untuk membuat database virtual—pemasangan yang kompatibel dengan aplikasi—lihat prosedur di Salinan virtual database SAP HANA.
Tentang pemasangan standar
Pemasangan standar menyediakan disk gambar cadangan data, log aktif, dan volume log arsip ke target yang ditentukan. Anda dapat memasang image cadangan snapshot database SAP HANA sebagai pemasangan standar untuk hal berikut:
Operasi manual apa pun.
Untuk menjalankan PEMERIKSAAN INTEGRITAS DATA SNAPSHOT: Alat ini menjalankan alat pemeriksaan persistensi SAP HANA, hdbpersdiag dengan opsi 'periksa semua' untuk memverifikasi status volume data yang responsif dari image snapshot yang terpasang. Tugas pemasangan
gagal jika ada kerusakan selama pemeriksaan ini.
Pemeriksaan awal selama pemasangan
Status konektivitas konektor: Agen Pencadangan dan DR diinstal dan
secret diterapkan untuk konektivitas host antara appliance pencadangan/pemulihan
dan agen Pencadangan dan DR.
Lokasi pemasangan yang ditentukan tersedia untuk operasi pemasangan.
Biner HANA telah diinstal.
Pastikan bahwa HANA sid sama dengan sumber tidak aktif dan berjalan di target.
Versi instance HANA lebih besar dari 2.0SP05.
Pemeriksaan izin pada project sumber dan target untuk layanan cloud.
Pasang image database sebagai pemasangan standar
Gunakan petunjuk ini untuk memasang image database sebagai pemasangan standar:
Di konsol pengelolaan Pengelola Aplikasi, klik kanan database yang dilindungi
dari daftar Aplikasi Pengelola Aplikasi, lalu pilih Akses.
Pilih cadangan dan pilih Pasang.
Di halaman Mount, pilih Project Name, Region, Zone, dan GCE Instance Name.
Atau, masukkan nama unik yang terkait dengan pemasangan di kolom Label.
Di bagian Application Options, nonaktifkan Create New Virtual Application.
Database Tenant yang Disertakan hanya bersifat informatif, yang menampilkan daftar
database tenant dalam image cadangan.
Di Mapping Options, masukkan lokasi pemasangan dan pilih jenis disk untuk volume data dan log.
Pemeriksaan Integritas Data Snapshot secara default ditetapkan ke benar (true). Alat ini akan menjalankan alat pemeriksaan persistensi SAP HANA, hdbpersdiag API dengan opsi 'check all'. Tindakan ini akan memverifikasi status data yang sehat dan volume log aktif dari image snapshot yang terpasang. Tugas pemasangan akan gagal dengan error untuk
kerusakan apa pun selama pemeriksaan ini, atau akan menampilkan keberhasilan.
Hasil pemeriksaan Integritas akan tersedia di bagian
/var/act/log/(HANA sid)_dataintegrity_check.log dan
/usr/sap/GC1/HDB00/hana-scaleup-3/trace/localclient.*.trc./.
Jika Anda tidak ingin menjalankan pemeriksaan, tetapkan ke salah (false) dengan mengklik tombol aktif/nonaktif.
Klik Pemeriksaan pra-cetak. Pemeriksaan Pre-Flight memvalidasi opsi yang diperlukan di server target agar pemasangan berhasil. Setelah berhasil
melakukan pra-penerbangan, tombol Kirim akan diaktifkan. Jika pemeriksaan pra-peluncuran gagal, Anda
dapat melihat penyebab kegagalan sehingga Anda dapat memperbaikinya dan menjalankan kembali pemeriksaan pra-peluncuran.
Klik Kirim. Anda dapat membuka Pemantau Tugas untuk
melihat progres dan detail tugas. Image yang terpasang tersedia di Pemasangan Aktif.
Pengelolaan pemasangan aktif
Setelah membuat pemasangan, Anda dapat melacak image dari
konsol pengelolaan Layanan Backup dan DR Pengelola Aplikasi>Pemasangan Aktif. Sebaiknya jangan biarkan gambar terpasang tanpa batas waktu. Hal ini karena image cadangan yang digunakan untuk membuat pemasangan tidak dapat berakhir hingga semua pemasangannya dihapus. Setelah selesai menggunakan image yang terpasang, Anda dapat:
Lepaskan
gambar. Anda dapat memasang kembali jika diperlukan. Kemudian, Anda dapat
menghapus
gambar tersebut nanti jika Anda yakin bahwa gambar tersebut tidak lagi diperlukan.
Lepaskan dan hapus image. Tindakan ini akan menghapus image yang di-mount, bukan cadangan yang menjadi dasar pemasangan.
Dokumentasi Backup and DR Service untuk penyebaran skala SAP HANA
Halaman ini adalah salah satu dari serangkaian halaman khusus untuk melindungi dan memulihkan instance scale-out SAP HANA dengan Layanan Backup dan DR.
Anda dapat menemukan informasi tambahan di halaman berikut:
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-08-18 UTC."],[[["\u003cp\u003eThis page outlines the procedure for mounting snapshot backup images of an SAP HANA scale-out database as a standard mount, which provides access to data, active log, and archive log volumes.\u003c/p\u003e\n"],["\u003cp\u003eStandard mounts are useful for manual operations and to run the SNAPSHOT DATA INTEGRITY CHECK, which verifies the health of data volumes using the SAP HANA \u003ccode\u003ehdbpersdiag\u003c/code\u003e tool.\u003c/p\u003e\n"],["\u003cp\u003ePre-checks before mounting include verifying connector connectivity, mount location availability, HANA binary installation, HANA SID status, HANA instance version, and permissions.\u003c/p\u003e\n"],["\u003cp\u003eDuring the mount process, users can specify a target server, set a label, configure mapping options like device path and disk type, and run a pre-flight check to ensure successful mount completion.\u003c/p\u003e\n"],["\u003cp\u003eOnce mounted, the image can be accessed via "Active Mounts", and should be unmounted or unmounted and deleted when no longer needed to allow the underlying backup to expire.\u003c/p\u003e\n"]]],[],null,["# Mount an SAP HANA scale-out backup as a standard mount\n\nFrom the management console, you can mount images of an SAP HANA database as a\nstandard mount or as a virtual database---application aware mount.\nThis is the procedure for a standard mount. To make a virtual\ndatabase---application aware mount---see the procedure in\n[SAP HANA database virtual copy](/backup-disaster-recovery/docs/access-data/recover-sap-hana-virtualdb).\n| **Note:** This information is for SAP HANA scale-out instances. For scale-up and HA 1+1 configurations, see [Backup and DR Service for SAP HANA](/backup-disaster-recovery/docs/concepts/backupdr-for-sap-hana).\n\nAbout standard mounts\n---------------------\n\nA standard mount provides the backup image disk of data, active log and archive\nlog volume to the specified target. You can mount snapshot backup images of an\nSAP HANA database as a standard mount for the following:\n\n- Any manual operation.\n- To run the SNAPSHOT DATA INTEGRITY CHECK: This tool runs the SAP HANA persistence checking tool, `hdbpersdiag` with the 'check all' option to verify the healthy state of data volumes from the mounted snapshot image. Mount jobs fail if there is any corruption during these checks.\n\nPre checks during mount\n-----------------------\n\n- Connector connectivity status: The Backup and DR agent is installed and a secret is applied for host connectivity between the backup/recovery appliance and the Backup and DR agent.\n- Mount locations specified are available for mount operation.\n- HANA binary is installed.\n- Verify that the HANA sid same as source is not up and running on the target.\n- The HANA instance version is greater than 2.0SP05.\n- Permission check on source and target project for the cloud service.\n\nMount the database image as a standard mount\n--------------------------------------------\n\nUse these instructions to mount the database image as a standard mount:\n\n1. In the management console **App Manager** , right-click the protected database\n from the **App Manager Applications** list, and select **Access**.\n\n | **Note:** You can use the **Managed Backup Plan** status filter to show only protected databases.\n2. Select a backup and choose **Mount**.\n\n3. On the Mount page, select the **Project Name** , **Region** , **Zone** , and **GCE Instance Name**.\n\n4. Optionally, enter a unique name associated with the mount in the **Label**\n field.\n\n5. Under **Application Options** , disable **Create New Virtual Application**.\n\n | **Note:** If you don't see the **Create New Virtual Application** option, then the image is from a file-based Full+Incremental snapshot, so a virtual database is not possible.\n\n **Included Tenant Databases** is informational only, showing the list of\n tenant databases under the backup image.\n6. At **Mapping Options**, enter mount locations and select disk types for both\n the data volume and the logs.\n\n7. The **Snapshot Data Integrity Check** is by default set to true. This\n tool will run the SAP HANA persistence checking tool, hdbpersdiag API with\n 'check all' option. This will verify the healthy state of data and active log\n volumes from the mounted snapshot image. Mount jobs will fail with error for\n any corruption during these checks otherwise it will show success.\n\n The result of the Integrity check will be available under\n `/var/act/log/(HANA sid)_dataintegrity_check.log` and\n `/usr/sap/GC1/HDB00/hana-scaleup-3/trace/localclient.*.trc./`.\n\n If you don't want to run the check, set it to false by clicking the toggle button.\n8. Click **Pre-Flight check** . The Pre-Flight check validates the required\n options on the target server for a successful mount. Upon a successful\n pre-flight the **Submit** button is enabled. If the pre-flight check fails, you\n see what failed so you can correct it and rerun the pre-flight check.\n\n9. Click **Submit** . You can go to the **Job Monitor** to\n view the progress and details of the job. The mounted image is\n available in the [Active Mounts](#active).\n\nManagement of the active mounts\n-------------------------------\n\nOnce you have created a mount, you can track the image from the\nBackup and DR Service management console **App Manager** \\\u003e **Active Mounts**. Ideally, don't leave any image mounted indefinitely. This is because the\nbackup image that the mount was created from, cannot expire until all its mounts have\nbeen deleted. When you have finished using the mounted image then either:\n\n- [Unmount](/backup-disaster-recovery/docs/access-data/manage-active-mounts#unmount) the image. You can [remount](/backup-disaster-recovery/docs/access-data/manage-active-mounts#remount) it if needed. You can then [delete](/backup-disaster-recovery/docs/access-data/manage-active-mounts#delete) the image later when you are certain it is no longer needed.\n- [Unmount and delete](/backup-disaster-recovery/docs/access-data/manage-active-mounts#unmount-delete) the image. This deletes the mounted image, not the backup that the mount is based on.\n\nBackup and DR Service documentation for SAP HANA scale-out\n----------------------------------------------------------\n\nThis page is one in a series of pages specific to protecting and recovering\nSAP HANA scale-out instances with Backup and DR Service.\nYou can find additional information in the following pages:\n\n- [Backup and DR for SAP HANA scale-out](/backup-disaster-recovery/docs/concepts/backupdr-for-sap-hana-scaleout)\n- [Prepare SAP HANA scale-out instances for backup](/backup-disaster-recovery/docs/configuration/prepare-sap-hana)\n- [Add an SAP HANA scale-out host, and discover and protect its databases](/backup-disaster-recovery/docs/configuration/discover-sap-hana-scaleout)\n- [Configure staging disk format and backup method for SAP HANA scale-out](/backup-disaster-recovery/docs/backup/backup-method-staging-disk-sap-hana-scaleout)\n- [Set application details and settings for SAP HANA scale-out instances](/backup-disaster-recovery/docs/backup/app-details-settings-sap-hana-scaleout)\n- [Back up HANA 1+n and HANA scale-out databases](/backup-disaster-recovery/docs/backup/back-up-sap-hana-scaleout)\n- [Restore and recover SAP HANA scale-out instances](/backup-disaster-recovery/docs/restore-data/restore-sap-hana-scaleout)\n- [Mount an SAP HANA scale-out backup as a standard mount](/backup-disaster-recovery/docs/access-data/mount-sap-hana)\n- [Mount an SAP HANA scale-out backup as a virtual database](/backup-disaster-recovery/docs/access-data/mount-sap-hana-virtualdb)\n- [Mount and migrate an SAP HANA scale-out backup for instant recovery to any target](/backup-disaster-recovery/docs/access-data/mount-and-migrate-sap-hana)"]]
