Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Halaman ini menjelaskan cara melihat laporan versi konektor bawaan di BigQuery.
Layanan Pencadangan dan DR menyediakan laporan versi konektor bawaan yang
dapat diakses di BigQuery. Anda dapat mengakses laporan ini setelah
menjalankan skrip bawaan di set data yang sama tempat log
dirutekan melalui sink log.
Laporan versi konektor memberikan informasi tentang detail
versi konektor yang diinstal di host Anda. Anda dapat menggunakan laporan versi konektor untuk mendeteksi host dengan konektor level bawah.
Nama perangkat: Nama perangkat yang terkait dengan host.
ID Appliance: ID appliance yang terkait dengan host.
Nama host: Nama host yang terkait dengan konektor.
ID Host: ID host yang terkait dengan konektor.
Jenis OS host: Jenis OS yang diinstal di host.
Alamat IP host: Alamat IP host.
Autentikasi DB: Jenis autentikasi, yang dapat berupa autentikasi berbasis DB atau Host.
Versi terinstal: Versi konektor saat ini yang diinstal di host.
Versi yang tersedia: Versi konektor terbaru yang tersedia untuk diupgrade.
Pemeriksaan versi: Menampilkan status versi konektor saat ini di host
dan memberikan rekomendasi untuk upgrade jika diperlukan. Statusnya dapat berupa
rilis saat ini, upgrade diperlukan, atau versi yang lebih baru.
Preferensi disk: Menentukan apakah image yang dibuat oleh host
diformat untuk NFS atau block IO (iSCSI atau fibre channel).
Transport: Mode transpor host, yang dapat berupa NFS ke hypervisor,
berbasis SAN, ISCSI VM Tamu, atau NFS ke host. NFS ke hypervisor berarti
disk staging ditampilkan melalui NFS ke host ESX. Dari host ESX, disk staging dipetakan dari VMDK ke VM. Berbasis SAN berarti disk staging
ditampilkan melalui fibre channel atau iSCSI ke host ESX. Host ESX kemudian
memetakan disk staging dari vRDM atau pRDM ke VM. ISCSI VM Tamu berarti
disk staging ditampilkan ke host atau VM melalui iSCSI. NFS
ke host berarti disk staging ditampilkan ke host atau VM
melalui NFS.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-09-03 UTC."],[[["\u003cp\u003ePrebuilt connector version reports are available in BigQuery through the Backup and DR Service, offering insights into connector details.\u003c/p\u003e\n"],["\u003cp\u003eThese reports allow users to detect hosts that are running outdated or down-level connector versions, aiding in maintenance and upgrades.\u003c/p\u003e\n"],["\u003cp\u003eThe connector version report contains crucial details such as appliance name, host details (name, ID, OS type, IP), DB authentication type, and disk preference.\u003c/p\u003e\n"],["\u003cp\u003eThe report includes specific version information for connectors like the installed version, available version, and a version check status, highlighting any needed upgrades.\u003c/p\u003e\n"],["\u003cp\u003eUsers can learn how to execute scripts, write custom queries, view reports in other platforms, and download reports using the provided documentation links.\u003c/p\u003e\n"]]],[],null,["# Connector version reports\n\nThis page explains how to view prebuilt connector version reports in BigQuery.\n\nThe Backup and DR Service provides prebuilt connector version reports that are\naccessible in BigQuery. You can access these reports after you\n[execute the prebuilt script](/backup-disaster-recovery/docs/monitor-reports/logs-route-bigquery#script) in the same [dataset](/backup-disaster-recovery/docs/monitor-reports/logs-route-bigquery#script) where the logs are\nbeing routed through the log sink.\n\nThe connector version report provides information about the details of the\nconnector versions installed on your hosts. You can use the connector version\nreport to detect hosts with down-level connectors.\n\n- **Appliance name**: The name of the appliance associated with the host.\n- **Appliance ID**: The ID of the appliance associated with the host.\n- **Host name**: The name of the host associated with the connector.\n- **Host ID**: The ID of the host associated with the connector.\n- **Host OS type**: The type of OS installed on the host.\n- **Host IP address**: The IP address of the host.\n- **DB authentication** : The type of authentication, which can be `DB` or `Host` based authentication.\n- **Installed version**: The current version of the connector installed on the host.\n- **Available version**: The latest connector version available for upgrade.\n- **Version check**: Displays the current connector version status on the host and provides recommendations for upgrades if necessary. The status can be the current release, upgrade required, or newer version.\n- **Disk preference**: Determines whether images created by the host are formatted for NFS or block IO (iSCSI or fibre channel).\n- **Transport**: The transport mode of the host, which can be NFS to hypervisor, SAN based, Guest VM ISCSI, or NFS to host. NFS to hypervisor means that the staging disk is presented over NFS to an ESX host. From the ESX host, the staging disk is mapped from the VMDK to a VM. SAN based means that the staging disk is presented over fibre channel or iSCSI to a ESX host. The ESX host then maps the staging disk from the vRDM or pRDM to a VM. Guest VM ISCSI means that the staging disk is presented to the host or the VM through iSCSI. NFS to host means that the staging disk is presented to the host or the VM through NFS.\n\nWhat's next\n-----------\n\n- Learn how to [Execute prebuilt reports script](/backup-disaster-recovery/docs/monitor-reports/logs-route-bigquery#script)\n- Learn how to [Write custom queries in BigQuery](/backup-disaster-recovery/docs/monitor-reports/custom-query)\n- Learn how to [View prebuilt reports in Connected Sheets](/backup-disaster-recovery/docs/monitor-reports/view-reports-sheets)\n- Learn how to [View prebuilt reports in Looker Studio](/backup-disaster-recovery/docs/monitor-reports/view-reports-lookerstudio)\n- Learn how to [Download prebuilt reports](/backup-disaster-recovery/docs/monitor-reports/view-reports-sheets#download)"]]
