StudySpec

Represents specification of a Study.

Fields
metrics[] object (MetricSpec)

Required. Metric specs for the Study.

parameters[] object (ParameterSpec)

Required. The set of parameters to tune.

algorithm enum (Algorithm)

The search algorithm specified for the Study.

observationNoise enum (ObservationNoise)

The observation noise level of the study. Currently only supported by the Vertex AI Vizier service. Not supported by HyperparameterTuningJob or TrainingPipeline.

measurementSelectionType enum (MeasurementSelectionType)

Describe which measurement selection type will be used

transferLearningConfig object (TransferLearningConfig)

The configuration info/options for transfer learning. Currently supported for Vertex AI Vizier service, not HyperParameterTuningJob

Union field automated_stopping_spec.

automated_stopping_spec can be only one of the following:

decayCurveStoppingSpec object (DecayCurveAutomatedStoppingSpec)

The automated early stopping spec using decay curve rule.

medianAutomatedStoppingSpec object (MedianAutomatedStoppingSpec)

The automated early stopping spec using median rule.

convexStopConfig
(deprecated)
object (ConvexStopConfig)

Deprecated. The automated early stopping using convex stopping rule.

convexAutomatedStoppingSpec object (ConvexAutomatedStoppingSpec)

The automated early stopping spec using convex stopping rule.

studyStoppingConfig object (StudyStoppingConfig)

Conditions for automated stopping of a Study. Enable automated stopping by configuring at least one condition.

JSON representation
{
  "metrics": [
    {
      object (MetricSpec)
    }
  ],
  "parameters": [
    {
      object (ParameterSpec)
    }
  ],
  "algorithm": enum (Algorithm),
  "observationNoise": enum (ObservationNoise),
  "measurementSelectionType": enum (MeasurementSelectionType),
  "transferLearningConfig": {
    object (TransferLearningConfig)
  },

  // Union field automated_stopping_spec can be only one of the following:
  "decayCurveStoppingSpec": {
    object (DecayCurveAutomatedStoppingSpec)
  },
  "medianAutomatedStoppingSpec": {
    object (MedianAutomatedStoppingSpec)
  },
  "convexStopConfig": {
    object (ConvexStopConfig)
  },
  "convexAutomatedStoppingSpec": {
    object (ConvexAutomatedStoppingSpec)
  }
  // End of list of possible types for union field automated_stopping_spec.
  "studyStoppingConfig": {
    object (StudyStoppingConfig)
  }
}

DecayCurveAutomatedStoppingSpec

The decay curve automated stopping rule builds a Gaussian Process Regressor to predict the final objective value of a Trial based on the already completed Trials and the intermediate measurements of the current Trial. Early stopping is requested for the current Trial if there is very low probability to exceed the optimal value found so far.

Fields
useElapsedDuration boolean

True if Measurement.elapsed_duration is used as the x-axis of each Trials Decay Curve. Otherwise, Measurement.step_count will be used as the x-axis.

JSON representation
{
  "useElapsedDuration": boolean
}

MedianAutomatedStoppingSpec

The median automated stopping rule stops a pending Trial if the Trial's best objectiveValue is strictly below the median 'performance' of all completed Trials reported up to the Trial's last measurement. Currently, 'performance' refers to the running average of the objective values reported by the Trial in each measurement.

Fields
useElapsedDuration boolean

True if median automated stopping rule applies on Measurement.elapsed_duration. It means that elapsedDuration field of latest measurement of current Trial is used to compute median objective value for each completed Trials.

JSON representation
{
  "useElapsedDuration": boolean
}

ConvexStopConfig

Configuration for ConvexStopPolicy.

Fields
maxNumSteps string (int64 format)

Steps used in predicting the final objective for early stopped trials. In general, it's set to be the same as the defined steps in training / tuning. When use_steps is false, this field is set to the maximum elapsed seconds.

minNumSteps string (int64 format)

Minimum number of steps for a trial to complete. Trials which do not have a measurement with num_steps > minNumSteps won't be considered for early stopping. It's ok to set it to 0, and a trial can be early stopped at any stage. By default, minNumSteps is set to be one-tenth of the maxNumSteps. When use_steps is false, this field is set to the minimum elapsed seconds.

autoregressiveOrder string (int64 format)

The number of Trial measurements used in autoregressive model for value prediction. A trial won't be considered early stopping if has fewer measurement points.

learningRateParameterName string

The hyper-parameter name used in the tuning job that stands for learning rate. Leave it blank if learning rate is not in a parameter in tuning. The learningRate is used to estimate the objective value of the ongoing trial.

useSeconds boolean

This bool determines whether or not the rule is applied based on elapsed_secs or steps. If useSeconds==false, the early stopping decision is made according to the predicted objective values according to the target steps. If useSeconds==true, elapsed_secs is used instead of steps. Also, in this case, the parameters maxNumSteps and minNumSteps are overloaded to contain max_elapsed_seconds and min_elapsed_seconds.

JSON representation
{
  "maxNumSteps": string,
  "minNumSteps": string,
  "autoregressiveOrder": string,
  "learningRateParameterName": string,
  "useSeconds": boolean
}

ConvexAutomatedStoppingSpec

Configuration for ConvexAutomatedStoppingSpec. When there are enough completed trials (configured by minMeasurementCount), for pending trials with enough measurements and steps, the policy first computes an overestimate of the objective value at maxNumSteps according to the slope of the incomplete objective value curve. No prediction can be made if the curve is completely flat. If the overestimation is worse than the best objective value of the completed trials, this pending trial will be early-stopped, but a last measurement will be added to the pending trial with maxNumSteps and predicted objective value from the autoregression model.

Fields
maxStepCount string (int64 format)

Steps used in predicting the final objective for early stopped trials. In general, it's set to be the same as the defined steps in training / tuning. If not defined, it will learn it from the completed trials. When use_steps is false, this field is set to the maximum elapsed seconds.

minStepCount string (int64 format)

Minimum number of steps for a trial to complete. Trials which do not have a measurement with stepCount > minStepCount won't be considered for early stopping. It's ok to set it to 0, and a trial can be early stopped at any stage. By default, minStepCount is set to be one-tenth of the maxStepCount. When useElapsedDuration is true, this field is set to the minimum elapsed seconds.

minMeasurementCount string (int64 format)

The minimal number of measurements in a Trial. Early-stopping checks will not trigger if less than minMeasurementCount+1 completed trials or pending trials with less than minMeasurementCount measurements. If not defined, the default value is 5.

learningRateParameterName string

The hyper-parameter name used in the tuning job that stands for learning rate. Leave it blank if learning rate is not in a parameter in tuning. The learningRate is used to estimate the objective value of the ongoing trial.

useElapsedDuration boolean

This bool determines whether or not the rule is applied based on elapsed_secs or steps. If useElapsedDuration==false, the early stopping decision is made according to the predicted objective values according to the target steps. If useElapsedDuration==true, elapsed_secs is used instead of steps. Also, in this case, the parameters maxNumSteps and minNumSteps are overloaded to contain max_elapsed_seconds and min_elapsed_seconds.

updateAllStoppedTrials boolean

ConvexAutomatedStoppingSpec by default only updates the trials that needs to be early stopped using a newly trained auto-regressive model. When this flag is set to True, all stopped trials from the beginning are potentially updated in terms of their finalMeasurement. Also, note that the training logic of autoregressive models is different in this case. Enabling this option has shown better results and this may be the default option in the future.

JSON representation
{
  "maxStepCount": string,
  "minStepCount": string,
  "minMeasurementCount": string,
  "learningRateParameterName": string,
  "useElapsedDuration": boolean,
  "updateAllStoppedTrials": boolean
}

MetricSpec

Represents a metric to optimize.

Fields
metricId string

Required. The id of the metric. Must not contain whitespaces and must be unique amongst all MetricSpecs.

goal enum (GoalType)

Required. The optimization goal of the metric.

safetyConfig object (SafetyMetricConfig)

Used for safe search. In the case, the metric will be a safety metric. You must provide a separate metric for objective metric.

JSON representation
{
  "metricId": string,
  "goal": enum (GoalType),
  "safetyConfig": {
    object (SafetyMetricConfig)
  }
}

GoalType

The available types of optimization goals.

Enums
GOAL_TYPE_UNSPECIFIED Goal type will default to maximize.
MAXIMIZE Maximize the goal metric.
MINIMIZE Minimize the goal metric.

SafetyMetricConfig

Used in safe optimization to specify threshold levels and risk tolerance.

Fields
safetyThreshold number

Safety threshold (boundary value between safe and unsafe). NOTE that if you leave SafetyMetricConfig unset, a default value of 0 will be used.

desiredMinSafeTrialsFraction number

Desired minimum fraction of safe trials (over total number of trials) that should be targeted by the algorithm at any time during the study (best effort). This should be between 0.0 and 1.0 and a value of 0.0 means that there is no minimum and an algorithm proceeds without targeting any specific fraction. A value of 1.0 means that the algorithm attempts to only Suggest safe Trials.

JSON representation
{
  "safetyThreshold": number,
  "desiredMinSafeTrialsFraction": number
}

ParameterSpec

Represents a single parameter to optimize.

Fields
parameterId string

Required. The id of the parameter. Must not contain whitespaces and must be unique amongst all ParameterSpecs.

scaleType enum (ScaleType)

How the parameter should be scaled. Leave unset for CATEGORICAL parameters.

conditionalParameterSpecs[] object (ConditionalParameterSpec)

A conditional parameter node is active if the parameter's value matches the conditional node's parent_value_condition.

If two items in conditionalParameterSpecs have the same name, they must have disjoint parent_value_condition.

Union field parameter_value_spec.

parameter_value_spec can be only one of the following:

doubleValueSpec object (DoubleValueSpec)

The value spec for a 'DOUBLE' parameter.

integerValueSpec object (IntegerValueSpec)

The value spec for an 'INTEGER' parameter.

categoricalValueSpec object (CategoricalValueSpec)

The value spec for a 'CATEGORICAL' parameter.

discreteValueSpec object (DiscreteValueSpec)

The value spec for a 'DISCRETE' parameter.

JSON representation
{
  "parameterId": string,
  "scaleType": enum (ScaleType),
  "conditionalParameterSpecs": [
    {
      object (ConditionalParameterSpec)
    }
  ],

  // Union field parameter_value_spec can be only one of the following:
  "doubleValueSpec": {
    object (DoubleValueSpec)
  },
  "integerValueSpec": {
    object (IntegerValueSpec)
  },
  "categoricalValueSpec": {
    object (CategoricalValueSpec)
  },
  "discreteValueSpec": {
    object (DiscreteValueSpec)
  }
  // End of list of possible types for union field parameter_value_spec.
}

DoubleValueSpec

value specification for a parameter in DOUBLE type.

Fields
minValue number

Required. Inclusive minimum value of the parameter.

maxValue number

Required. Inclusive maximum value of the parameter.

defaultValue number

A default value for a DOUBLE parameter that is assumed to be a relatively good starting point. Unset value signals that there is no offered starting point.

Currently only supported by the Vertex AI Vizier service. Not supported by HyperparameterTuningJob or TrainingPipeline.

JSON representation
{
  "minValue": number,
  "maxValue": number,
  "defaultValue": number
}

IntegerValueSpec

value specification for a parameter in INTEGER type.

Fields
minValue string (int64 format)

Required. Inclusive minimum value of the parameter.

maxValue string (int64 format)

Required. Inclusive maximum value of the parameter.

defaultValue string (int64 format)

A default value for an INTEGER parameter that is assumed to be a relatively good starting point. Unset value signals that there is no offered starting point.

Currently only supported by the Vertex AI Vizier service. Not supported by HyperparameterTuningJob or TrainingPipeline.

JSON representation
{
  "minValue": string,
  "maxValue": string,
  "defaultValue": string
}

CategoricalValueSpec

value specification for a parameter in CATEGORICAL type.

Fields
values[] string

Required. The list of possible categories.

defaultValue string

A default value for a CATEGORICAL parameter that is assumed to be a relatively good starting point. Unset value signals that there is no offered starting point.

Currently only supported by the Vertex AI Vizier service. Not supported by HyperparameterTuningJob or TrainingPipeline.

JSON representation
{
  "values": [
    string
  ],
  "defaultValue": string
}

DiscreteValueSpec

value specification for a parameter in DISCRETE type.

Fields
values[] number

Required. A list of possible values. The list should be in increasing order and at least 1e-10 apart. For instance, this parameter might have possible settings of 1.5, 2.5, and 4.0. This list should not contain more than 1,000 values.

defaultValue number

A default value for a DISCRETE parameter that is assumed to be a relatively good starting point. Unset value signals that there is no offered starting point. It automatically rounds to the nearest feasible discrete point.

Currently only supported by the Vertex AI Vizier service. Not supported by HyperparameterTuningJob or TrainingPipeline.

JSON representation
{
  "values": [
    number
  ],
  "defaultValue": number
}

ScaleType

The type of scaling that should be applied to this parameter.

Enums
SCALE_TYPE_UNSPECIFIED By default, no scaling is applied.
UNIT_LINEAR_SCALE Scales the feasible space to (0, 1) linearly.
UNIT_LOG_SCALE Scales the feasible space logarithmically to (0, 1). The entire feasible space must be strictly positive.
UNIT_REVERSE_LOG_SCALE Scales the feasible space "reverse" logarithmically to (0, 1). The result is that values close to the top of the feasible space are spread out more than points near the bottom. The entire feasible space must be strictly positive.

ConditionalParameterSpec

Represents a parameter spec with condition from its parent parameter.

Fields
parameterSpec object (ParameterSpec)

Required. The spec for a conditional parameter.

Union field parent_value_condition. A set of parameter values from the parent ParameterSpec's feasible space. parent_value_condition can be only one of the following:
parentDiscreteValues object (DiscreteValueCondition)

The spec for matching values from a parent parameter of DISCRETE type.

parentIntValues object (IntValueCondition)

The spec for matching values from a parent parameter of INTEGER type.

parentCategoricalValues object (CategoricalValueCondition)

The spec for matching values from a parent parameter of CATEGORICAL type.

JSON representation
{
  "parameterSpec": {
    object (ParameterSpec)
  },

  // Union field parent_value_condition can be only one of the following:
  "parentDiscreteValues": {
    object (DiscreteValueCondition)
  },
  "parentIntValues": {
    object (IntValueCondition)
  },
  "parentCategoricalValues": {
    object (CategoricalValueCondition)
  }
  // End of list of possible types for union field parent_value_condition.
}

DiscreteValueCondition

Represents the spec to match discrete values from parent parameter.

Fields
values[] number

Required. Matches values of the parent parameter of 'DISCRETE' type. All values must exist in discreteValueSpec of parent parameter.

The Epsilon of the value matching is 1e-10.

JSON representation
{
  "values": [
    number
  ]
}

IntValueCondition

Represents the spec to match integer values from parent parameter.

Fields
values[] string (int64 format)

Required. Matches values of the parent parameter of 'INTEGER' type. All values must lie in integerValueSpec of parent parameter.

JSON representation
{
  "values": [
    string
  ]
}

CategoricalValueCondition

Represents the spec to match categorical values from parent parameter.

Fields
values[] string

Required. Matches values of the parent parameter of 'CATEGORICAL' type. All values must exist in categoricalValueSpec of parent parameter.

JSON representation
{
  "values": [
    string
  ]
}

Algorithm

The available search algorithms for the Study.

Enums
ALGORITHM_UNSPECIFIED The default algorithm used by Vertex AI for hyperparameter tuning and Vertex AI Vizier.

ObservationNoise

Describes the noise level of the repeated observations.

"Noisy" means that the repeated observations with the same Trial parameters may lead to different metric evaluations.

Enums
OBSERVATION_NOISE_UNSPECIFIED The default noise level chosen by Vertex AI.
LOW Vertex AI assumes that the objective function is (nearly) perfectly reproducible, and will never repeat the same Trial parameters.
HIGH Vertex AI will estimate the amount of noise in metric evaluations, it may repeat the same Trial parameters more than once.

MeasurementSelectionType

This indicates which measurement to use if/when the service automatically selects the final measurement from previously reported intermediate measurements. Choose this based on two considerations: A) Do you expect your measurements to monotonically improve? If so, choose LAST_MEASUREMENT. On the other hand, if you're in a situation where your system can "over-train" and you expect the performance to get better for a while but then start declining, choose BEST_MEASUREMENT. B) Are your measurements significantly noisy and/or irreproducible? If so, BEST_MEASUREMENT will tend to be over-optimistic, and it may be better to choose LAST_MEASUREMENT. If both or neither of (A) and (B) apply, it doesn't matter which selection type is chosen.

Enums
MEASUREMENT_SELECTION_TYPE_UNSPECIFIED Will be treated as LAST_MEASUREMENT.
LAST_MEASUREMENT Use the last measurement reported.
BEST_MEASUREMENT Use the best measurement reported.

TransferLearningConfig

This contains flag for manually disabling transfer learning for a study. The names of prior studies being used for transfer learning (if any) are also listed here.

Fields
disableTransferLearning boolean

Flag to to manually prevent vizier from using transfer learning on a new study. Otherwise, vizier will automatically determine whether or not to use transfer learning.

priorStudyNames[] string

Output only. Names of previously completed studies

JSON representation
{
  "disableTransferLearning": boolean,
  "priorStudyNames": [
    string
  ]
}

StudyStoppingConfig

The configuration (stopping conditions) for automated stopping of a Study. Conditions include trial budgets, time budgets, and convergence detection.

Fields
shouldStopAsap boolean

If true, a Study enters STOPPING_ASAP whenever it would normally enters STOPPING state.

The bottom line is: set to true if you want to interrupt on-going evaluations of Trials as soon as the study stopping condition is met. (Please see Study.State documentation for the source of truth).

minimumRuntimeConstraint object (StudyTimeConstraint)

Each "stopping rule" in this proto specifies an "if" condition. Before Vizier would generate a new suggestion, it first checks each specified stopping rule, from top to bottom in this list. Note that the first few rules (e.g. minimumRuntimeConstraint, minNumTrials) will prevent other stopping rules from being evaluated until they are met. For example, setting minNumTrials=5 and always_stop_after= 1 hour means that the Study will ONLY stop after it has 5 COMPLETED trials, even if more than an hour has passed since its creation. It follows the first applicable rule (whose "if" condition is satisfied) to make a stopping decision. If none of the specified rules are applicable, then Vizier decides that the study should not stop. If Vizier decides that the study should stop, the study enters STOPPING state (or STOPPING_ASAP if shouldStopAsap = true). IMPORTANT: The automatic study state transition happens precisely as described above; that is, deleting trials or updating StudyConfig NEVER automatically moves the study state back to ACTIVE. If you want to resume a Study that was stopped, 1) change the stopping conditions if necessary, 2) activate the study, and then 3) ask for suggestions. If the specified time or duration has not passed, do not stop the study.

maximumRuntimeConstraint object (StudyTimeConstraint)

If the specified time or duration has passed, stop the study.

minNumTrials integer

If there are fewer than this many COMPLETED trials, do not stop the study.

maxNumTrials integer

If there are more than this many trials, stop the study.

maxNumTrialsNoProgress integer

If the objective value has not improved for this many consecutive trials, stop the study.

WARNING: Effective only for single-objective studies.

maxDurationNoProgress string (Duration format)

If the objective value has not improved for this much time, stop the study.

WARNING: Effective only for single-objective studies.

A duration in seconds with up to nine fractional digits, ending with 's'. Example: "3.5s".

JSON representation
{
  "shouldStopAsap": boolean,
  "minimumRuntimeConstraint": {
    object (StudyTimeConstraint)
  },
  "maximumRuntimeConstraint": {
    object (StudyTimeConstraint)
  },
  "minNumTrials": integer,
  "maxNumTrials": integer,
  "maxNumTrialsNoProgress": integer,
  "maxDurationNoProgress": string
}

StudyTimeConstraint

time-based Constraint for Study

Fields

Union field constraint.

constraint can be only one of the following:

maxDuration string (Duration format)

Counts the wallclock time passed since the creation of this Study.

A duration in seconds with up to nine fractional digits, ending with 's'. Example: "3.5s".

endTime string (Timestamp format)

Compares the wallclock time to this time. Must use UTC timezone.

A timestamp in RFC3339 UTC "Zulu" format, with nanosecond resolution and up to nine fractional digits. Examples: "2014-10-02T15:01:23Z" and "2014-10-02T15:01:23.045123456Z".

JSON representation
{

  // Union field constraint can be only one of the following:
  "maxDuration": string,
  "endTime": string
  // End of list of possible types for union field constraint.
}