Anthos Service Mesh and Traffic Director are now Cloud Service Mesh. For more information, see the Cloud Service Mesh overview.

Provision a managed Cloud Service Mesh control plane on GKE

Cloud Service Mesh is a Google-managed service mesh that you simply enable. Google handles reliability, upgrades, scaling, and security for you.

This page shows you how to use the fleet API to set up managed Cloud Service Mesh using Istio APIs.

Prerequisites

As a starting point, this guide assumes that you have:

A Cloud project
A Cloud Billing account
Obtained the required permissions to provision Cloud Service Mesh
Enabled Workload Identity on your clusters and node pools.

Requirements

One or more clusters with a supported version of GKE, in one of the supported regions.
Note that managed Cloud Service Mesh uses GKE release channels to balance between stability and upgrade speed. New changes to Cloud Service Mesh in-cluster components (including CNI, MDPC, proxies, and Istio CRDs) will rollout to clusters that subscribe GKE rapid channel first. They will then be promoted to GKE regular channel, and finally the GKE stable channel, once they demonstrate enough stability.
- Managed Cloud Service Mesh doesn't support changing GKE release channels safely.
- If you do change the GKE release channel, Cloud Service Mesh automatically upgrades/downgrades the in-cluster components (CNI, MDPC, default injected proxy version and Istio CRDs) to align with the current GKE release channel.
Ensure that your cluster has enough capacity for the required components that managed Cloud Service Mesh installs in the cluster.
- The mdp-controller deployment in kube-system namespace requests cpu: 50m, memory: 128Mi.
- The istio-cni-node daemonset in kube-system namespace requests cpu: 100m, memory: 100Mi on each node.
Ensure that the organizational policy constraints/compute.disableInternetNetworkEndpointGroup is disabled. If the policy is enabled, ServiceEntry may not work.
Ensure that the client machine that you provision managed Cloud Service Mesh from has network connectivity to the API server.
Your clusters must be registered to a fleet. This is included in the instructions, or can be done separately prior to the provision.
Your project must have the Service Mesh fleet feature enabled. This is included in the instructions or can be done separately.
GKE Autopilot is only supported with GKE version 1.21.3+.
Cloud Service Mesh can use multiple GKE clusters in a single-project single-network environment or a multi-project single-network environment.
- If you join clusters that are not in the same project, they must be registered to the same fleet host project, and the clusters must be in a shared VPC configuration together on the same network.
- For a single-project multi-cluster environment, the fleet project can be the same as the cluster project. For more information about fleets, see Fleets Overview.
- For a multi-project environment, we recommend that you host the fleet in a separate project from the cluster projects. If your organizational policies and existing configuration allow it, we recommend that you use the shared VPC project as the fleet host project. For more information, see Setting up clusters with Shared VPC.

Roles required to install Cloud Service Mesh

The following table describes the roles that are required to install managed Cloud Service Mesh.

Role name	Role ID	Grant location	Description
GKE Hub Admin	roles/gkehub.admin	Fleet project	Full access to GKE Hubs and related resources.
Service Usage Admin	roles/serviceusage.serviceUsageAdmin	Fleet project	Ability to enable, disable, and inspect service states, inspect operations, and consume quota and billing for a consumer project. ^{(Note 1)}
CA Service Admin ^Beta	roles/privateca.admin	Fleet project	Full access to all CA Service resources. ^{(Note 2)}

Limitations

We recommend that you review the list of Cloud Service Mesh supported features and limitations. In particular, note the following:

The IstioOperator API isn't supported since its main purpose is to control in-cluster components.

Note: You can still enable optional features without using the IstioOperator API, see Enabling optional features on managed Cloud Service Mesh. You can also use the migration tool included with asmcli to automatically convert other IstioOperator optional features to be compatible with managed control plane. For more information, see Migrate from IstioOperator.
Using Certificate Authority Service (CA Service) requires configuring Cloud Service Mesh per cluster, and is not supported when using the fleet-default configuration in GKE Enterprise.
For GKE Autopilot clusters, cross-project setup is only supported with GKE 1.23 or later.
For GKE Autopilot clusters, in order to adapt to the GKE Autopilot resource limit, the default proxy resource requests and limits are set to 500m CPU and 512 Mb memory. You can override the default values using custom injection.
During the provisioning process for a managed control plane, Istio CRDs are provisioned in the specified cluster. If there are existing Istio CRDs in the cluster, they will be overwritten.
Istio CNI and Cloud Service Mesh are not compatible with GKE Sandbox. Therefore, managed Cloud Service Mesh with the TRAFFIC_DIRECTOR implementation does not support clusters with GKE Sandbox enabled.

Before you begin

Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.

In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

Go to project selector

Make sure that billing is enabled for your Google Cloud project.

In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

Go to project selector

Make sure that billing is enabled for your Google Cloud project.

Configure gcloud (even if you are using Cloud Shell).

Authenticate with the Google Cloud CLI, where FLEET_PROJECT_ID is the ID of your Fleet Host project. Generally, the FLEET_PROJECT_ID is created by default and has the same name as the project.
```
       gcloud auth login --project FLEET_PROJECT_ID
```
Update the components:
```
       gcloud components update
```

Enable the required APIs on your fleet host project.

  gcloud services enable mesh.googleapis.com \
      --project=FLEET_PROJECT_ID

Enabling mesh.googleapis.com enables the following APIs:

API	Purpose	Can Be Disabled
`meshconfig.googleapis.com`	Cloud Service Mesh uses the Mesh Configuration API to relay configuration data from your mesh to Google Cloud. Additionally, enabling the Mesh Configuration API allows you to access the Cloud Service Mesh pages in the Google Cloud console and to use the Cloud Service Mesh certificate authority.	No
`meshca.googleapis.com`	Related to Cloud Service Mesh certificate authority used by managed Cloud Service Mesh.	No
`container.googleapis.com`	Required to create Google Kubernetes Engine (GKE) clusters.	No
`gkehub.googleapis.com`	Required to manage the mesh as a fleet.	No
`monitoring.googleapis.com`	Required to capture telemetry for mesh workloads.	No
`stackdriver.googleapis.com`	Required to use the Services UI.	No
`opsconfigmonitoring.googleapis.com`	Required to use the Services UI for off-Google Cloud clusters.	No
`connectgateway.googleapis.com`	Required so that the managed Cloud Service Mesh control plane can access mesh workloads.	Yes*
`trafficdirector.googleapis.com`	Enables a highly available and scalable managed control plane.	Yes*
`networkservices.googleapis.com`	Enables a highly available and scalable managed control plane.	Yes*
`networksecurity.googleapis.com`	Enables a highly available and scalable managed control plane.	Yes*

Warning: Disabling connectgateway.googleapis.com, trafficdirector.googleapis.com, networkservices.googleapis.com, and/or networksecurity.googleapis.com causes managed Cloud Service Mesh control plane to stop working. If the fleet does not use managed Cloud Service Mesh on any cluster, then these APIs can be disabled.

Configure managed Cloud Service Mesh

The steps required to provision managed Cloud Service Mesh using the fleet API depend on whether you prefer to enable by default for new fleet clusters or enable it per cluster.

Configure for your fleet

If you have enabled Google Kubernetes Engine (GKE) Enterprise edition, you can enable managed Cloud Service Mesh as a default configuration for your fleet. This means that every new GKE on Google Cloud cluster registered during cluster creation will have managed Cloud Service Mesh enabled on the cluster. You can find out more about fleet default configuration in Manage fleet-level features.

Enabling managed Cloud Service Mesh as a default configuration for your fleet and registering clusters to the fleet during cluster creation only supports Mesh CA. If you want to use Certificate Authority Service, we recommend that you enable it per cluster.

To enable fleet-level defaults for managed Cloud Service Mesh, complete the following steps:

Console

In the Google Cloud console, go to the Feature Manager page.

Go to Feature Manager
In the Service Mesh pane, click Configure.
Review the settings that are inherited by all new clusters that you create in the Google Cloud console and register to the fleet.

Note: These settings are GKE settings that are prerequisites for using Cloud Service Mesh.
To apply these settings, click Configure.
In the confirmation dialog, click Confirm.
Optional: Sync existing clusters to the default settings:
1. In the Clusters in the fleet list, select the clusters that you want to sync. You can only select clusters that have Cloud Service Mesh installed.
2. Click Sync to fleet settings and click Confirm in the confirmation dialog that appears. This operation can take a few minutes to complete.

gcloud

To configure fleet-level defaults using the Google Cloud CLI, you must establish the following settings:

Fleet-level settings

Create a mesh.yaml file that only contains the single line management: automatic:
```
echo "management: automatic" > mesh.yaml
```

Enable Cloud Service Mesh for your fleet:

gcloud container fleet mesh enable --project FLEET_PROJECT_ID \
    --fleet-default-member-config mesh.yaml

If you see the following error, then you need to enable GKE Enterprise.

ERROR: (gcloud.container.fleet.mesh.enable) FAILED_PRECONDITION: The
[anthos.googleapis.com] service is required for this operation and is not
enabled for the project [PROJECT_NUMBER]. Please use the Google Developers
Console to enable it.: failed precondition

Network-level settings
- If your network's project differs from your fleet host project (for example you are using a shared VPC), you must allow Cloud Service Mesh service accounts in the fleet project to access the network project. You only need to do this once for the network project.
  
  Grant service accounts in the fleet project permission to access the network project:
```
gcloud projects add-iam-policy-binding "NETWORK_PROJECT_ID"  \
    --member "serviceAccount:service-FLEET_PROJECT_NUMBER@gcp-sa-servicemesh.iam.gserviceaccount.com" \
    --role roles/anthosservicemesh.serviceAgent
```
Cluster-level settings
- When you're ready to create clusters to use with Cloud Service Mesh, create and register them in a single step with Google Cloud CLI to use the default configuration. For example:
```
gcloud container clusters create-auto CLUSTER_NAME \
    --fleet-project FLEET_PROJECT_ID \
    --location=LOCATION
```
  You can get the project number for your fleet project by running the following command:
```
gcloud projects list --filter="FLEET_PROJECT_ID" --format="value(PROJECT_ID)"
```
  The --location flag is the compute zone or region (such as us-central1-a or us-central1) for the cluster.
- If your cluster's project differs from your fleet host project, you must allow Cloud Service Mesh service accounts in the fleet project to access the cluster project, and enable required APIs on the cluster project. You only need to do this once for each cluster project.
  
  Grant service accounts in the fleet project permission to access the cluster project:
```
gcloud projects add-iam-policy-binding "CLUSTER_PROJECT_ID"  \
    --member "serviceAccount:service-FLEET_PROJECT_NUMBER@gcp-sa-servicemesh.iam.gserviceaccount.com" \
    --role roles/anthosservicemesh.serviceAgent
```
  Enable the Mesh API on the cluster's project:
```
gcloud services enable mesh.googleapis.com \
  --project=CLUSTER_PROJECT_ID
```
  Replace CLUSTER_PROJECT_ID with the unique identifier of your cluster project. If you created your cluster in the same project as your fleet, then the CLUSTER_PROJECT_ID is the same as the FLEET_PROJECT_ID.

Proceed to Verify the control plane has been provisioned.

Configure per cluster

Use the following steps to configure managed Cloud Service Mesh for each cluster in your mesh individually.

Enable the Cloud Service Mesh fleet feature

Enable Cloud Service Mesh on the fleet project. Note that if you plan to register multiple clusters, enabling Cloud Service Mesh happens at the fleet-level so you only have to run this command once.

gcloud container fleet mesh enable --project FLEET_PROJECT_ID

Register clusters to a fleet

Register a GKE cluster using fleet workload identity. The --location flag is the compute zone or region (such as us-central1-a or us-central1) for the cluster.
```
gcloud container clusters update CLUSTER_NAME \
  --location CLUSTER_LOCATION \
  --fleet-project FLEET_PROJECT_ID
```

Verify your cluster is registered:

gcloud container fleet memberships list --project FLEET_PROJECT_ID

Example output:

NAME                 EXTERNAL_ID                           LOCATION
cluster-1            1d8e255d-2b55-4df9-8793-0435461a2cbc  us-central1

Make note of the MEMBERSHIP_NAME, as you will need it when you enable automatic management.

If your cluster's network's project differs from your fleet host project (for example you are using a shared VPC), you must allow Cloud Service Mesh service accounts in the fleet project to access the network project. You only need to do this once for the network project.

Grant service accounts in the fleet project permission to access the network project:
```
 gcloud projects add-iam-policy-binding "NETWORK_PROJECT_ID"  \
      --member "serviceAccount:service-FLEET_PROJECT_NUMBER@gcp-sa-servicemesh.iam.gserviceaccount.com" \
      --role roles/anthosservicemesh.serviceAgent
```
If your cluster's project differs from your fleet host project, you must allow Cloud Service Mesh service accounts in the fleet project to access the cluster project, and enable required APIs on the cluster project.

You only need to do this once for each cluster project. If you previously configured managed Cloud Service Mesh for this combination of cluster and fleet projects, then these changes have already been applied and you don't have to run the following commands.

Grant service accounts in the fleet project permission to access the cluster project:
```
 gcloud projects add-iam-policy-binding "CLUSTER_PROJECT_ID" \
     --member "serviceAccount:service-FLEET_PROJECT_NUMBER@gcp-sa-servicemesh.iam.gserviceaccount.com" \
     --role roles/anthosservicemesh.serviceAgent
```
Enable the Mesh API on the cluster's project:
```
 gcloud services enable mesh.googleapis.com \
     --project=CLUSTER_PROJECT_ID
```

Configure Certificate Authority Service (Optional)

If your service mesh deployment requires Certificate Authority Service (CA Service), then follow Configure Certificate Authority Service for managed Cloud Service Mesh to enable it for your fleet. Make sure to complete all steps before proceeding to the next section.

Enable automatic management

Run the following command to enable automatic management:

  gcloud container fleet mesh update \
     --management automatic \
     --memberships MEMBERSHIP_NAME \
     --project FLEET_PROJECT_ID \
     --location MEMBERSHIP_LOCATION

where:

MEMBERSHIP_NAME is the membership name listed when you verified that your cluster was registered to the fleet.
MEMBERSHIP_LOCATION is the location of your membership (either a region, or global).

If you recently created the membership using the command in this guide, this should be the region of your cluster. If you have a zonal cluster, use the region corresponding to the cluster's zone. For example, if you have a zonal cluster in us-central1-c, then use the value us-central1.

This value may be global if you registered prior to May 2023, or if you specified the global location when registering the membership. You can check your membership's location with gcloud container fleet memberships list --project FLEET_PROJECT_ID.

Verify the control plane has been provisioned

After a few minutes, verify that the control plane status is ACTIVE:

gcloud container fleet mesh describe --project FLEET_PROJECT_ID

The output is similar to:

...
membershipSpecs:
  projects/746296320118/locations/us-central1/memberships/demo-cluster-1:
    mesh:
      management: MANAGEMENT_AUTOMATIC
membershipStates:
  projects/746296320118/locations/us-central1/memberships/demo-cluster-1:
    servicemesh:
      controlPlaneManagement:
        details:
        - code: REVISION_READY
          details: 'Ready: asm-managed'
        state: ACTIVE
        implementation: ISTIOD | TRAFFIC_DIRECTOR
      dataPlaneManagement:
        details:
        - code: OK
          details: Service is running.
        state: ACTIVE
    state:
      code: OK
      description: 'Revision(s) ready for use: asm-managed.'
...

Take note of the control plane displayed in the implementation field, either ISTIOD or TRAFFIC_DIRECTOR. See Cloud Service Mesh supported features for control plane differences and supported configurations, and for how the control plane implementation is selected.

Configure `kubectl` to point to the cluster

The following sections involve running kubectl commands against each one of your clusters. Before proceeding through the following sections, run the following command for each of your clusters to configure kubectl to point to the cluster.

gcloud container clusters get-credentials CLUSTER_NAME \
      --location CLUSTER_LOCATION \
      --project CLUSTER_PROJECT_ID

Note that an ingress gateway isn't automatically deployed with the control plane. Decoupling the deployment of the ingress gateway and control plane lets you manage your gateways in a production environment. If you want to use an Istio ingress gateway or an egress gateway, see Deploy gateways. If you want to use the Kubernetes Gateway API, see Prepare Gateway for Mesh. To enable other optional features, see Enabling optional features on Cloud Service Mesh.

Managed data plane

If you use managed Cloud Service Mesh, Google fully manages upgrades of your proxies.

With the managed data plane feature enabled, the sidecar proxies and injected gateways are actively and automatically updated in conjunction with the managed control plane by restarting workloads to re-inject new versions of the proxy. This starts after the control plane has been upgraded and normally completes within 2 weeks after starting.

Note that the managed data plane relies on the GKE release channel. If you change the GKE release channel while the managed data plane is enabled, managed Cloud Service Mesh will update the proxies of all existing workloads like an managed data plane rollout.

If disabled, proxy management is done passively - driven by the natural lifecycle of the pods in the cluster and must be manually triggered by the user to control the update rate.

The managed data plane upgrades proxies by evicting pods that are running earlier versions of the proxy. The evictions are done gradually, honoring the pod disruption budget and controlling the rate of change.

The managed data plane doesn't manage the following:

Uninjected pods
Manually injected pods
Jobs
StatefulSets
DaemonSets

Disable the managed data plane (optional)

If you are provisioning managed Cloud Service Mesh on a new cluster, then you can disable the managed data plane completely, or for individual namespaces or pods. The managed data plane will continue to be disabled for existing clusters where it was disabled by default or manually.

To disable the managed data plane at the cluster level and revert back to managing the sidecar proxies yourself, change the annotation:

kubectl annotate --overwrite controlplanerevision -n istio-system \
  mesh.cloud.google.com/proxy='{"managed":"false"}'

To disable the managed data plane for a namespace:

kubectl annotate --overwrite namespace NAMESPACE \
  mesh.cloud.google.com/proxy='{"managed":"false"}'

To disable the managed data plane for a pod:

kubectl annotate --overwrite pod POD_NAME \
  mesh.cloud.google.com/proxy='{"managed":"false"}'

Enable maintenance windows

If you have a GKE maintenance window configured, active upgrades will commence at the start of the next available maintenance window and continue without pause until all managed pods have been updated (usually 12 hours). The maintenance window is not observed for CVE related rollouts.

Cloud Service Mesh uses the GKE maintenance window to align with GKE.

Enable maintenance notifications

You can request to be notified about upcoming managed data plane maintenance up to a week before maintenance is scheduled. Maintenance notifications are not sent by default. You must also Configure a GKE maintenance window before you can receive notifications. When enabled, notifications are sent at least two days before the upgrade operation.

To opt in to managed data plane maintenance notifications:

Go to the Communication page.

Go to the Communication page
In the Cloud Service Mesh Upgrade row, under the Email column, select the radio button to turn maintenance notifications ON.

Each user who wants to receive notifications must opt in separately. If you want to set an email filter for these notifications, the subject line is:

Upcoming upgrade for your Cloud Service Mesh cluster "CLUSTER_LOCATION/CLUSTER_NAME".

The following example shows a typical managed data plane maintenance notification:

Subject Line: Upcoming upgrade for your Cloud Service Mesh cluster "<location/cluster-name>"

Dear Cloud Service Mesh user,

The Cloud Service Mesh components in your cluster ${instance_id} (https://console.cloud.google.com/kubernetes/clusters/details/${instance_id}/details?project=${project_id}) are scheduled to upgrade on ${scheduled_date_human_readable} at ${scheduled_time_human_readable}.

You can check the release notes (https://cloud.google.com/service-mesh/docs/release-notes) to learn about the new update.

In the event that this maintenance gets canceled, you'll receive another email.

Sincerely,

The Cloud Service Mesh Team

(c) 2023 Google LLC 1600 Amphitheater Parkway, Mountain View, CA 94043 You have received this announcement to update you about important changes to Google Cloud Platform or your account. You can opt out of maintenance window notifications by editing your user preferences: https://console.cloud.google.com/user-preferences/communication?project=${project_id}

Configure endpoint discovery (only for multi-cluster installations)

If your mesh has only one cluster, skip these multi-cluster steps and proceed to Deploy applications or Migrate applications.

Before you continue, ensure that Cloud Service Mesh is configured on each cluster.

Enabling Cloud Service Mesh with the fleet API will enable endpoint discovery for this cluster. However, you must open firewall ports. To disable endpoint discovery for one or more clusters, see the instructions to disable it in Endpoint discovery between clusters with declarative API.

For an example application with two clusters, see HelloWorld service example.

Deploy applications

Enable the namespace for injection. The steps depend on your control plane implementation.

Managed (TD)

Apply the default injection label to the namespace:

kubectl label namespace NAMESPACE \
    istio.io/rev- istio-injection=enabled --overwrite

Managed (Istiod)

Recommended: Run the following command to apply the default injection label to the namespace:

  kubectl label namespace NAMESPACE \
      istio.io/rev- istio-injection=enabled --overwrite

If you are an existing user with the Managed Istiod control plane: We recommend that you use default injection, but revision-based injection is supported. Use the following instructions:

Run the following command to locate the available release channels:
```
kubectl -n istio-system get controlplanerevision
```
The output is similar to the following:
```
NAME                AGE
asm-managed-rapid   6d7h
```
NOTE: If two control plane revisions appear in the list above, remove one. Having multiple control plane channels in the cluster is not supported.

In the output, the value under the NAME column is the revision label that corresponds to the available release channel for the Cloud Service Mesh version.

Apply the revision label to the namespace:

kubectl label namespace NAMESPACE \
    istio-injection- istio.io/rev=REVISION_LABEL --overwrite

Validate that the namespace label is applied correctly using the following command.

  kubectl get namespace -L istio-injection

Example output:

  NAME                 STATUS   AGE     ISTIO-INJECTION
  default              Active   5m9s    enabled

At this point, you have successfully configured managed Cloud Service Mesh. If you have any existing workloads in labeled namespaces, then restart them so they get proxies injected.

If you deploy an application in a multi-cluster setup, replicate the Kubernetes and control plane configuration in all clusters, unless you plan to limit that particular config to a subset of clusters. The configuration applied to a particular cluster is the source of truth for that cluster.

Customize injection (optional)

You can override default values and customize injection settings but this can lead to unforeseen configuration errors and resulting issues with sidecar containers. Before you customize injection, read the information after the sample for notes on particular settings and recommendations.

Per-pod configuration is available to override these options on individual pods. This is done by adding an istio-proxy container to your pod. The sidecar injection will treat any configuration defined here as an override to the default injection template.

For example, the following configuration customizes a variety of settings, including lowering the CPU requests, adding a volume mount, and adding a preStop hook:

apiVersion: v1
kind: Pod
metadata:
  name: example
spec:
  containers:
  - name: hello
    image: alpine
  - name: istio-proxy
    image: auto
    resources:
      requests:
        cpu: "200m"
        memory: "256Mi"
      limits:
        cpu: "200m"
        memory: "256Mi"
    volumeMounts:
    - mountPath: /etc/certs
      name: certs
    lifecycle:
      preStop:
        exec:
          command: ["sleep", "10"]
  volumes:
  - name: certs
    secret:
      secretName: istio-certs

In general, any field in a pod can be set. However, care must be taken for certain fields:

Kubernetes requires the image field to be set before the injection has run. While you can set a specific image to override the default one, we recommend that you set the image to auto, which will cause the sidecar injector to automatically select the image to use.
Some fields in containers are dependent on related settings. For example, must be less than or equal to the CPU limit. If both fields are not properly configured, the pod may fail to start.
Kubernetes lets you set both requests and limits for resources in your Pod spec. GKE Autopilot only considers requests. For more information, see Setting resource limits in Autopilot.

Additionally, certain fields are configurable by annotations on the Pod, although it is recommended to use the above approach to customizing settings. Take additional care for the following annotations:

For GKE Standard, if sidecar.istio.io/proxyCPU is set, make sure to explicitly set sidecar.istio.io/proxyCPULimit. Otherwise the sidecar's CPU limit will be set as unlimited.
For GKE Standard, if sidecar.istio.io/proxyMemory is set, make sure to explicitly set sidecar.istio.io/proxyMemoryLimit. Otherwise the sidecar's memory limit will be set as unlimited.
For GKE Autopilot, configuring resource requests and limits using annotations might overprovision resources. Use the image template approach to avoid. See Resource modification examples in Autopilot.

For example, see the below resources annotation:

spec:
  template:
    metadata:
      annotations:
        sidecar.istio.io/proxyCPU: "200m"
        sidecar.istio.io/proxyCPULimit: "200m"
        sidecar.istio.io/proxyMemory: "256Mi"
        sidecar.istio.io/proxyMemoryLimit: "256Mi"

Migrate applications to managed Cloud Service Mesh

To migrate applications from in-cluster Cloud Service Mesh to managed Cloud Service Mesh, perform the following steps:

Replace the current namespace label. The steps depend on your control plane implementation.

Managed (TD)

Apply the default injection label to the namespace:

kubectl label namespace NAMESPACE \
    istio.io/rev- istio-injection=enabled --overwrite

Managed (Istiod)

Recommended: Run the following command to apply the default injection label to the namespace:

  kubectl label namespace NAMESPACE \
      istio.io/rev- istio-injection=enabled --overwrite

If you are an existing user with the Managed Istiod control plane: We recommend that you use default injection, but revision-based injection is supported. Use the following instructions:

Run the following command to locate the available release channels:
```
kubectl -n istio-system get controlplanerevision
```
The output is similar to the following:
```
NAME                AGE
asm-managed-rapid   6d7h
```
NOTE: If two control plane revisions appear in the list above, remove one. Having multiple control plane channels in the cluster is not supported.

In the output, the value under the NAME column is the revision label that corresponds to the available release channel for the Cloud Service Mesh version.

Apply the revision label to the namespace:

kubectl label namespace NAMESPACE \
    istio-injection- istio.io/rev=REVISION_LABEL --overwrite

Perform a rolling upgrade of deployments in the namespace:
```
kubectl rollout restart deployment -n NAMESPACE
```
Test your application to verify that the workloads function correctly.
If you have workloads in other namespaces, repeat the previous steps for each namespace.
If you deployed the application in a multi-cluster setup, replicate the Kubernetes and Istio configuration in all clusters, unless there is a desire to limit that configuration to a subset of clusters only. The configuration applied to a particular cluster is the source of truth for that cluster.

If you are satisfied that your application works as expected, you can remove the in-cluster istiod after you switch all namespaces to the managed control plane, or keep them as a backup - istiod will automatically scale down to use fewer resources. To remove, skip to Delete old control plane.

If you encounter problems, you can identify and resolve them by using the information in Resolving managed control plane issues and if necessary, roll back to the previous version.

Delete old control plane

After you install and confirm that all namespaces use the Google-managed control plane, you can delete the old control plane.

kubectl delete Service,Deployment,HorizontalPodAutoscaler,PodDisruptionBudget istiod -n istio-system --ignore-not-found=true

If you used istioctl kube-inject instead of automatic injection, or if you installed additional gateways, check the metrics for the control plane, and verify that the number of connected endpoints is zero.

Roll back

Perform the following steps if you need to roll back to the previous control plane version:

Update workloads to be injected with the previous version of the control plane. In the following command, the revision value asm-191-1 is used only as an example. Replace the example value with the revision label of your previous control plane.
```
kubectl label namespace NAMESPACE istio-injection- istio.io/rev=asm-191-1 --overwrite
```
Restart the Pods to trigger re-injection so the proxies have the previous version:
```
kubectl rollout restart deployment -n NAMESPACE
```

The managed control plane will automatically scale to zero and not use any resource when not in use. The mutating webhooks and provisioning will remain and do not affect cluster behavior.

The gateway is now set to the asm-managed revision. To roll back, re-run the Cloud Service Mesh install command, which will re-deploy gateway pointing back to your in-cluster control plane:

kubectl -n istio-system rollout undo deploy istio-ingressgateway

Expect this output on success:

deployment.apps/istio-ingressgateway rolled back

Uninstall Cloud Service Mesh

Managed control plane auto-scales to zero when no namespaces are using it. For detailed steps, see Uninstall Cloud Service Mesh.

Provision a managed Cloud Service Mesh control plane on GKE

Prerequisites

Requirements

Roles required to install Cloud Service Mesh

Limitations

Before you begin

Enabling mesh.googleapis.com enables the following APIs:

Configure managed Cloud Service Mesh

Configure for your fleet

Console

gcloud

Configure per cluster

Enable the Cloud Service Mesh fleet feature

Register clusters to a fleet

Configure Certificate Authority Service (Optional)

Enable automatic management

Verify the control plane has been provisioned

Configure kubectl to point to the cluster

Managed data plane

Disable the managed data plane (optional)

Enable maintenance windows

Enable maintenance notifications

Configure endpoint discovery (only for multi-cluster installations)

Deploy applications

Managed (TD)

Managed (Istiod)

Customize injection (optional)

Migrate applications to managed Cloud Service Mesh

Managed (TD)

Managed (Istiod)

Delete old control plane

Roll back

Uninstall Cloud Service Mesh

Configure `kubectl` to point to the cluster