Anthos Service Mesh and Traffic Director are now Cloud Service Mesh. For more information, see the Cloud Service Mesh overview.

Installing and upgrading gateways with Istio APIs

Cloud Service Mesh gives you the option to deploy and manage gateways as part of your service mesh. A gateway describes a load balancer that operates at the edge of the mesh and receives incoming or outgoing HTTP/TCP connections. Gateways are primarily used to manage ingress traffic, but you can also configure gateways to manage other types of traffic.

Egress gateways: An egress gateway lets you configure a dedicated exit node for traffic leaving the mesh, letting you limit which services can or should access external networks, or to enable secure control of egress traffic to add security to your mesh, for example.
Ingress gateways: An ingress gateway lets you configure a dedicated entrance node to receive incoming HTTP/TCP connections.
East-west gateways: A proxy for east-west traffic to allow service workloads to communicate across cluster boundaries in a multi-primary mesh on different networks. By default, this gateway will be public on the Internet.

This page describes best practices for deploying and upgrading the gateway proxies as well as examples of configuring your own istio-ingressgateway and istio-egressgateway gateway proxies.

You can deploy gateways in different ways and you can use more than one topology within the same cluster. Refer to Gateway deployment topologies in the Istio documentation to learn more about these topologies.

Best practices for deploying gateways

The best practices for deploying gateways depend on whether you are using the managed data plane or the unmanaged data plane.

Best practices for managed data plane

Enable the managed data plane.
Add a managed revision label to a namespace.
Deploy and manage the control plane and gateways separately.
As a security best practice, we recommended that you deploy gateways in a different namespace from the control plane.
Use automatic sidecar injection (auto-injection) to inject the proxy configuration for the gateways similar to how you would inject the sidecar proxies for your services.

These best practices:

Ensure your managed gateways are automatically kept up-to-date with the latest enhancements and security updates.
Offloads management and maintenance of gateway instances to Cloud Service Mesh managed data plane.

Best practices for unmanaged data plane

Deploy and manage the control plane and gateways separately.
As a security best practice, we recommended that you deploy gateways in a different namespace from the control plane.
Use automatic sidecar injection (auto-injection) to inject the proxy configuration for the gateways similar to how you would inject the sidecar proxies for your services.

These best practices:

Let your namespace administrators manage gateways without needing elevated privileges to your entire cluster.
Let your administrators use the same deployment tooling or mechanism that they use to manage Kubernetes applications to deploy and manage gateways.
Give administrators full control over the gateway Deployment, and also simplify operations. When a new upgrade is available or a configuration has changed, administrators update gateway Pods by restarting them. This makes the experience of operating a gateway Deployment the same as operating sidecar proxies for your services.

Deploy sample gateway

To support users with existing deployment tools, Cloud Service Mesh supports the same ways to deploy a gateway as Istio: IstioOperator, Helm, and Kubernetes YAML. Each method produces the same result. Although you can choose the method you are most familiar with, we recommend that you use the Kubernetes YAML method because it is easier to modify and you can store hydrated manifests in source control.

The following steps show how to deploy a sample gateway.

Create a namespace for the gateway if you don't already have one. Replace GATEWAY_NAMESPACE with the name of your namespace.
```
kubectl create namespace GATEWAY_NAMESPACE
```
Enable the namespace for injection. The steps depend on your control plane implementation.
Managed (TD)
1. Apply the revision label to the namespace:
```
kubectl label namespace GATEWAY_NAMESPACE \
    istio.io/rev- istio-injection=enabled --overwrite
```
Managed (Istiod)
New users use the following command to apply the revision label to the namespace:
```
  kubectl label namespace GATEWAY_NAMESPACE \
      istio.io/rev- istio-injection=enabled --overwrite
```
Existing users with the Managed Istiod control plane use the following instructions:
1. Use the following command to locate the available release channels:
```
kubectl -n istio-system get controlplanerevision
```
  The output is similar to the following:
```
NAME                AGE
asm-managed-rapid   6d7h
```
  NOTE: If two control plane revisions appear in the list above, remove one. Having multiple control plane channels in the cluster is not supported.
  
  In the output, the value under the NAME column is the revision label that corresponds to the available release channel for the Cloud Service Mesh version.
2. Apply the revision label to the namespace:
```
kubectl label namespace GATEWAY_NAMESPACE \
    istio-injection- istio.io/rev=REVISION_LABEL --overwrite
```
In-cluster
1. Use the following command to locate the revision label on istiod:
```
kubectl get deploy -n istio-system -l app=istiod -o \
  jsonpath={.items[*].metadata.labels.'istio\.io\/rev'}'{"\n"}'
```
2. Apply the revision label to the namespace. In the following command, REVISION is the value of the istiod revision label that you noted in the previous step.
```
kubectl label namespace GATEWAY_NAMESPACE \
    istio.io/rev- istio-injection=enabled --overwrite
```
Copy the configuration files for the sample gateways from the anthos-service-mesh repository.
Change your directory to the samples directory. To ensure you are in the correct directory, run the ls command to list the directory contents and then confirm there is a gateways directory (which you will access in the next step) and an online-boutique directory.

Deploy an ingress or egress gateway. These are located in the samples/gateways/ directory as is, or modify it as needed.

Ingress

kubectl apply -n GATEWAY_NAMESPACE -f samples/gateways/istio-ingressgateway

Egress

kubectl apply -n GATEWAY_NAMESPACE -f samples/gateways/istio-egressgateway

After you create the deployment, verify that the new services are working correctly:

kubectl get pod,service -n GATEWAY_NAMESPACE

Verify that the output is similar to the following:

NAME                                      READY   STATUS    RESTARTS   AGE
pod/istio-ingressgateway-856b7c77-bdb77   1/1     Running   0          3s

NAME                           TYPE           CLUSTER-IP     EXTERNAL-IP      PORT(S)        AGE
service/istio-ingressgateway   LoadBalancer   10.24.5.129    34.82.157.6      80:31904/TCP   3s

Manage gateway resources like any other Kubernetes application. The samples in the anthos-service-mesh-packages repository are meant for guidance and a quickstart. Customize them according to your needs.

Gateway selectors

You apply a Gateway configuration to the istio-ingressgateway and istio-egressgateway proxies to manage inbound and outbound traffic for your mesh, letting you specify which traffic you want to enter or leave the mesh. The labels on a gateway deployment's Pods are used by Gateway configuration resources, so it's important that your Gateway selector matches these labels.

For example, in the preceding deployments, the istio=ingressgateway label is set on the gateway Pods. To apply a Gateway configuration to these deployments, you need to select the same label:

apiVersion: networking.istio.io/v1beta1
kind: Gateway
metadata:
  name: gateway
spec:
  selector:
    istio: ingressgateway
...

For an example of a Gateway configuration and Virtual Service, see frontend.yaml in the Online Boutique sample application.

Upgrade gateways

In-place upgrades

For most use cases, you should upgrade your gateways following the in-place upgrade pattern. Because gateways utilize Pod injection, new gateway Pods that are created will automatically be injected with the latest configuration, which includes the version.

If you would like to change the control plane revision in use by the gateway, you can set the istio.io/rev label on the gateway Deployment, which will also trigger a rolling restart.

Managed control plane

Since Google manages the control plane upgrades for the managed control plane, you can simply restart the gateway Deployment and the new pods will automatically be injected with the latest configuration and version.

kubectl rollout restart deployment istio-ingressgateway \
  -n GATEWAY_NAMESPACE

In-cluster control plane

To apply the same pattern to your gateways when you have the in-cluster control plane, you will need to change the control plane revision in use by the gateway. Set the istio.io/rev label on the gateway Deployment which will trigger a rolling restart. The steps required depend on whether you need to update the revision label on namespace and/or the gateway pod.

If you labeled the namespace for injection, set the istio.io/rev label on the namespace to the new revision value:

  kubectl label namespace GATEWAY_NAMESPACE \
    istio-injection- istio.io/rev=REVISION \
    --overwrite

If you enabled injection only for the gateway pod, set the istio.io/rev label on the Deployment to the new revision value like the following Kubernetes YAML file:

cat <<EOF > gateway-deployment.yaml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: istio-ingressgateway
  namespace: GATEWAY_NAMESPACE
spec:
  selector:
    matchLabels:
      istio: ingressgateway
  template:
    metadata:
      annotations:
        # This is required to tell Cloud Service Mesh to inject the gateway with the
        # required configuration.
        inject.istio.io/templates: gateway
      labels:
        istio: ingressgateway
        istio.io/rev: REVISION
    spec:
      containers:
      - name: istio-proxy
        image: auto # The image will automatically update each time the pod starts.
EOF

kubectl apply -f gateway-deployment.yaml

Canary upgrades (advanced)

If you are using the in-cluster control plane and would like to more slowly control the rollout of a new control plane revision, you can follow the canary upgrade pattern. You can run multiple versions of a gateway Deployment and ensure everything works as expected with a subset of your traffic. For example, if you want to roll out a new revision, canary, create a copy of your gateway Deployment with the istio.io/rev=REVISION label set to the new revision and a new name, for example istio-ingressgateway-canary:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: istio-ingressgateway-canary
  namespace: GATEWAY_NAMESPACE
spec:
  selector:
    matchLabels:
      istio: ingressgateway
  template:
    metadata:
      annotations:
        inject.istio.io/templates: gateway
      labels:
        istio: ingressgateway
        istio.io/rev: REVISION # Set to the control plane revision you want to deploy
    spec:
      containers:
      - name: istio-proxy
        image: auto

When this Deployment is created, you will then have two versions of the gateway, both selected by the same Service:

kubectl get endpoints -o "custom-columns=NAME:.metadata.name,PODS:.subsets[*].addresses[*].targetRef.name"

NAME                   PODS
istio-ingressgateway   istio-ingressgateway-788854c955-8gv96,istio-ingressgateway-canary-b78944cbd-mq2qf

If you are satisfied that your applications are working as expected, run this command to transition to the new version by deleting the Deployment with the old istio.io/rev label set:

kubectl delete deploy/istio-ingressgateway -n GATEWAY_NAMESPACE

If you encountered an issue when testing your application with the new version of the gateway, run this command to transition back to the old version by deleting the Deployment with the new istio.io/rev label set:

kubectl delete deploy/istio-ingressgateway-canary -n GATEWAY_NAMESPACE

Advanced configuration

Configure gateway minimum TLS version

For Cloud Service Mesh, the default minimum TLS version for gateway servers is 1.2. You can configure the minimum TLS version using the minProtocolVersion field. For more information, see ServerTLSSettings.

Unsupported features

If you have TRAFFIC_DIRECTOR control plane implementation then the following fields or values in Gateway are not supported:

ServerTLSSettings.TLSmode with AUTO_PASSTHROUGH value
ServerTLSSettings.verifyCertificateSpki
ServerTLSSettings.verifyCertificateHash

Troubleshoot gateways

Failed to update gateway image from `auto`

When you deploy or upgrade a gateway, Cloud Service Mesh inserts auto as a placeholder in the image field. After the call to mutating webhook, Cloud Service Mesh automatically replaces this placeholder with the actual Cloud Service Mesh proxy image. If the call to mutating webhook fails, the auto placeholder remains, and the container is not found. This is typically caused by an incorrect namespace label. Ensure that you configured the correct namespace and then deploy or upgrade the gateway again.