Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Halaman ini menjelaskan cara mengedit setelan penyimpanan bersama atau menghapus penyimpanan bersama.
Mengedit setelan kumpulan penyimpanan
Anda dapat mengubah setelan berikut setelah membuat pool penyimpanan:
Kapasitas kumpulan penyimpanan
Anda dapat mengubah ukuran kapasitas pool penyimpanan untuk mengontrol biaya. Kapasitas
kumpulan penyimpanan dapat disesuaikan dengan kelipatan 1 GiB. Anda tidak dapat mengurangi kapasitas
kumpulan di bawah jumlah semua kapasitas volume yang terpasang ke kumpulan.
Kapasitas kumpulan dengan tingkat layanan Flex tidak dapat dikurangi. Pool dengan
performa kustom Flex hanya dapat ditingkatkan sekali setiap empat jam.
Performa
Pool dengan tingkat layanan performa kustom zonal fleksibel memungkinkan Anda
menyesuaikan throughput, tetapi hanya sekali setiap empat jam.
Kebijakan Active Directory
Anda dapat melampirkan kebijakan Active Directory ke kumpulan penyimpanan yang
belum memiliki kebijakan Active Directory. Anda dapat mengubah
kebijakan Active Directory, tetapi Anda tidak dapat mengganti kebijakan yang
sudah dilampirkan ke kumpulan dengan kebijakan lain.
Menambahkan kebijakan Active Directory tidak akan memengaruhi volume yang ada di pool.
Setelan penempatan otomatis
Untuk pool Premium dan Extreme, Anda hanya dapat mengaktifkan penjenisan otomatis satu kali
untuk pool. Pilihan Anda bersifat permanen. Setelah diaktifkan, penjenjangan otomatis tidak dapat dinonaktifkan.
Untuk pool zona Flex berperforma kustom dengan pengelompokan otomatis diaktifkan, Anda
dapat menyesuaikan Nilai minimum tingkat Hot dengan meningkatkan ukurannya dan juga
mengaktifkan atau menonaktifkan peningkatan otomatis.
Deskripsi dan label pool
Anda dapat mengubah deskripsi pool penyimpanan dan menambahkan, mengubah, atau menghapus label.
Mengalihkan zona aktif dan replika
Kumpulan penyimpanan regional tingkat layanan Flex mereplikasi data secara sinkron
di antara dua zona. Zona aktif melayani semua volume pool, sementara zona replika bertindak sebagai standby. Jika zona aktif berhenti berfungsi,
NetApp Volumes akan otomatis mengalihkan layanan NFS atau SMB ke
zona replika. Meskipun peralihan ini terjadi setelah jeda I/O singkat, operasi layanan file dilanjutkan tanpa kehilangan data.
Operasi layanan file dari klien di zona yang sebelumnya aktif dapat mengalami peningkatan latensi karena traffic lintas zona dengan zona yang baru aktif.
Perhatikan bahwa keluar lintas zona dari klien dapat menimbulkan biaya transfer data antar-zona Compute Engine. Untuk mengetahui informasi harga, lihat
Harga Jaringan.
Anda juga dapat memicu pengalihan zona secara manual, dan hal ini juga dapat menyebabkan jeda I/O.
Gunakan petunjuk berikut untuk mengganti zona secara manual menggunakan
Google Cloud konsol atau Google Cloud CLI.
Konsol
Buka halaman NetApp Volumes di konsol Google Cloud .
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-09-04 UTC."],[],[],null,["# Manage your storage pool\n\nThis page describes how to edit storage pool settings or delete a storage pool.\n\nEdit storage pool settings\n--------------------------\n\nYou can change the following settings after you create a storage pool:\n\nStorage pool capacity\n: You can resize storage pool capacity to control charges. Storage pool\n capacity is adjustable in 1 GiB increments. You can't decrease pool\n capacity below the sum of all capacity of the volumes attached to the pool.\n Pools with Flex service level can't be decreased in capacity. Pools with\n Flex custom performance can only be increased once every four hours.\n\nPerformance\n: Pools with the Flex zonal custom performance service level lets you\n adjust throughput, but only once every four hours.\n\nActive Directory policy\n: You can attach an Active Directory policy to a storage pool that\n doesn't already have an Active Directory policy. You can modify the\n Active Directory policy, however, you can't replace a policy that is\n already attached to a pool with another policy.\n\n\n \u003cbr /\u003e\n\n\n Adding an Active Directory policy doesn't affect existing volumes in a pool.\n\nAuto-tiering settings\n: For Premium and Extreme pools, you can enable auto-tiering only once\n for a pool. Your selection is permanent. Once auto-tiering is enabled, it\n can't be disabled.\n: For custom-performance Flex zonal pools with auto-tiering enabled, you\n can adjust the *Hot tier threshold* by increasing its size and also\n enable or disable *auto-increase*.\n\nPool description and labels\n: You can change storage pool descriptions and add, modify, or delete labels.\n\nSwitch active and replica zones\n-------------------------------\n\nRegional storage pools of Flex service level replicate data synchronously\nbetween two zones. The active zone serves all volumes of the pool, while the\nreplica zone acts as a standby. If the active zone stops working,\nNetApp Volumes automatically switches the NFS or SMB service to\nthe replica zone. While this switch happens after a brief I/O pause, file\nservice operations resume without any data loss.\n\nFile service operations from clients in the previously active zone can have\nincreased latency because of the cross-zone traffic with the newly active zone.\nNote that cross-zone exit from the clients can incur a Compute Engine\ninter-zone data transfer charge. For pricing information, see\n[Network Pricing](/vpc/network-pricing).\n\nYou can also trigger a zone switch manually, and this can also cause an I/O\npause.\n\nUse the following instructions to switch a zone manually using the\nGoogle Cloud console or Google Cloud CLI. \n\n### Console\n\n1. Go to the **NetApp Volumes** page in the Google Cloud console.\n\n [Go to NetApp Volumes](https://console.cloud.google.com/netapp/volumes)\n2. Click **Storage pools**.\n\n3. Click the name of the regional Flex storage pool you want to fail over.\n\n4. Click **Switch active/replica zones**.\n\n5. Review the current zone versus replica zone settings and the new settings\n that appear in the dialog.\n\n6. Click **Switch** to proceed.\n\n7. Read through the confirmation dialog and enter the name of the pool and\n then click **Switch**.\n\nAfter the switch operation ends, your active zone and replica zone will\nhave changed roles.\n\n### gcloud\n\nSwitch a zone manually: \n\n```bash\n gcloud netapp storage-pools switch STORAGE_POOL_NAME \\\n --project=PROJECT_ID \\\n --location=LOCATION \\\n```\n\nReplace the following information:\n\n- \u003cvar translate=\"no\"\u003eSTORAGE_POOL_NAME\u003c/var\u003e: the name of the storage pool.\n This name must be unique per location.\n\n- \u003cvar translate=\"no\"\u003ePROJECT_ID\u003c/var\u003e: the name of the project you want to\n create the storage pool in.\n\n- \u003cvar translate=\"no\"\u003eLOCATION\u003c/var\u003e: the location for the pool.\n\nFor more information on additional optional flags, see\n[Google Cloud SDK documentation on storage-pools switch](/sdk/gcloud/reference/beta/netapp/storage-pools/switch).\n\nDelete a storage pool\n---------------------\n\nYou can delete storage pools to control charges. Use the following instructions\nto delete a storage pool:\n\n1. Go to the **NetApp Volumes** page in the Google Cloud console.\n\n [Go to NetApp Volumes](https://console.cloud.google.com/netapp/volumes)\n2. Click **Storage pools**.\n\n3. Select the storage pool you want to delete.\n\n4. Click **Delete**.\n\n5. To confirm deletion, enter the name of the storage pool.\n\n6. Click **Delete**.\n\nWhat's next\n-----------\n\nRead about [volumes](/netapp/volumes/docs/configure-and-use/volumes/overview)."]]
