Tetap teratur dengan koleksi
Simpan dan kategorikan konten berdasarkan preferensi Anda.
Membuat instance Memorystore for Memcached menggunakan konsol Google Cloud
Panduan memulai ini akan memandu Anda melakukan langkah-langkah untuk membuat instance Memorystore for Memcached, terhubung ke instance, menetapkan nilai, mengambil nilai, dan menghapus instance.
Sebelum memulai
Sign in to your Google Cloud account. If you're new to
Google Cloud,
create an account to evaluate how our products perform in
real-world scenarios. New customers also get $300 in free credits to
run, test, and deploy workloads.
In the Google Cloud console, on the project selector page,
select or create a Google Cloud project.
Pilih konfigurasi untuk instance baru Anda di halaman Buat instance Memcached di konsol Google Cloud :
Masukkan ID instance menggunakan huruf kecil, angka, dan tanda hubung saja.
Awali dengan huruf.
Misalnya, my-memcached-instance-1.
Pilih us-central1 dari dropdown Region.
Pilih Automatically distribute dari dropdown Zona.
Masukkan 2 di bagian Node untuk membuat dua node.
Pilih 1 GB Memory per node.
Pilih 1 untuk Cores per node.
Pilih default untuk Authorized network.
Klik Buat.
Setelah instance dibuat, klik ID instance untuk melihat halaman detail instance.
Tulis IP address salah satu node Anda.
Menghubungkan ke instance dari VM Compute Engine
Untuk menguji koneksi:
Hubungkan ke VM Linux. Untuk mengetahui langkah-langkah menghubungkan ke VM Linux, lihat Panduan Memulai Menggunakan VM Linux.
Jika Anda menggunakan image berbasis Debian untuk membuat instance VM seperti yang dijelaskan dalam
panduan memulai cepat, instal telnet menggunakan apt-get:
sudo apt-get install telnet
Dari terminal, telnet ke alamat IP salah satu node Memcached.
Ganti node-ip-address dengan alamat IP node Anda.
telnet node-ip-address 11211
Anda akan melihat output berikut dengan [bracketed-variables] diganti dengan variabel project Anda:
Trying [node-ip-address]…
Connected to [node-ip-address]
Dalam sesi telnet, masukkan beberapa perintah Memcached:
Enter:
get greeting
Hasil:
END
Enter:
set greeting 1 0 11
hello world
Hasil:
STORED
Enter:
get greeting
Hasil:
VALUE greeting 1 11
hello world
END
Memorystore for Memcached mendukung library Memcached open source standar.
Pembersihan
Agar akun Google Cloud Anda tidak dikenai biaya untuk
resource yang digunakan pada halaman ini, ikuti langkah-langkah berikut.
[[["Mudah dipahami","easyToUnderstand","thumb-up"],["Memecahkan masalah saya","solvedMyProblem","thumb-up"],["Lainnya","otherUp","thumb-up"]],[["Sulit dipahami","hardToUnderstand","thumb-down"],["Informasi atau kode contoh salah","incorrectInformationOrSampleCode","thumb-down"],["Informasi/contoh yang saya butuhkan tidak ada","missingTheInformationSamplesINeed","thumb-down"],["Masalah terjemahan","translationIssue","thumb-down"],["Lainnya","otherDown","thumb-down"]],["Terakhir diperbarui pada 2025-08-19 UTC."],[],[],null,["# Quickstart: Create a Memorystore for Memcached instance by using the Google Cloud console\n\nCreate a Memorystore for Memcached instance by using the Google Cloud console\n=============================================================================\n\nThis quickstart walks you through the steps to create a Memorystore for Memcached\ninstance, connect to the instance, set a value, retrieve a value, and delete the\ninstance.\n| **Caution:** You cannot create a Memorystore for Memcached instance without first having a private services access connection established. See [Networking](/memorystore/docs/memcached/networking) for details on the private services access connection that is required for Memorystore for Memcached.\n\nBefore you begin\n----------------\n\n- Sign in to your Google Cloud account. If you're new to Google Cloud, [create an account](https://console.cloud.google.com/freetrial) to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.\n- In the Google Cloud console, on the project selector page,\n select or create a Google Cloud project.\n\n | **Note**: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.\n\n [Go to project selector](https://console.cloud.google.com/projectselector2/home/dashboard)\n-\n [Verify that billing is enabled for your Google Cloud project](/billing/docs/how-to/verify-billing-enabled#confirm_billing_is_enabled_on_a_project).\n\n- In the Google Cloud console, on the project selector page,\n select or create a Google Cloud project.\n\n | **Note**: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.\n\n [Go to project selector](https://console.cloud.google.com/projectselector2/home/dashboard)\n-\n [Verify that billing is enabled for your Google Cloud project](/billing/docs/how-to/verify-billing-enabled#confirm_billing_is_enabled_on_a_project).\n\n1. Enable the Service Networking API for your project. \n [Enable the Service Networking API](https://console.cloud.google.com/apis/library/servicenetworking.googleapis.com)\n2. Enable the Memorystore for Memcached API for your project. \n [Enable the Memorystore for Memcached API](https://console.cloud.google.com/apis/api/memcache.googleapis.com)\n\n\u003cbr /\u003e\n\nCreating a Memcached instance\n-----------------------------\n\n1. Go to the Memorystore for Memcached page in the Google Cloud console.\n\n [Memorystore for Memcached](https://console.cloud.google.com/memorystore/memcached/instances) \n\n2. Click the **Create Instance** button.\n\n3. Select the configurations for your new instance on the **Create a Memcached\n instance** page in the Google Cloud console:\n\n - Enter an instance ID using only lowercase letters, numbers, and hyphens. Start with a letter.\n - For example, `my-memcached-instance-1`.\n - Choose `us-central1` from the **Region** dropdown.\n - Choose `Automatically distribute` from the **Zone** dropdown.\n - Enter `2` under **Nodes** to create two nodes.\n - Choose 1 GB of **Memory per node**.\n - Choose 1 for **Cores per node**.\n - Select `default` for the **Authorized network**.\n\n | **Note:** If you see the **Private service connection required** panel, you need to [establish a private services access connection](/memorystore/docs/memcached/establishing-connection).\n4. Click **Create**.\n\n5. After the instance is created, click the instance ID to view the instance\n details page.\n\n6. Write down the `IP address` of one of your nodes.\n\nConnecting to your instance from a Compute Engine VM\n----------------------------------------------------\n\n| **Note:** To connect to a Memcached instance, your client VM must be located in the same region, and must be connected to the same network, as your instance.\n\nTo test the connection:\n\n1. Connect to a Linux VM. For steps to connect to a Linux VM, see [Quickstart Using a Linux VM](/compute/docs/create-linux-vm-instance).\n If you used a Debian based image to create your VM instance as described in the\n quickstart, install `telnet` using `apt-get`:\n\n sudo apt-get install telnet\n\n2. From the terminal, telnet to the IP address of one of the Memcached nodes.\n Replace \u003cvar translate=\"no\"\u003enode-ip-address\u003c/var\u003e with the IP address of your node.\n\n ```\n telnet node-ip-address 11211\n ```\n\n You should see the following output with the `[bracketed-variables]` replaced\n your project's variables: \n\n ```\n Trying [node-ip-address]…\n Connected to [node-ip-address]\n ```\n3. In the telnet session, enter some Memcached commands:\n\n Enter: \n\n ```\n get greeting\n ```\n\n Result: \n\n ```\n END\n ```\n\n Enter: \n\n ```\n set greeting 1 0 11\n hello world\n ```\n\n Result: \n\n ```\n STORED\n ```\n\n Enter: \n\n ```\n get greeting\n ```\n\n Result: \n\n ```\n VALUE greeting 1 11\n hello world\n END\n ```\n\nMemorystore for Memcached supports standard open source Memcached libraries.\n\nClean up\n--------\n\n\nTo avoid incurring charges to your Google Cloud account for\nthe resources used on this page, follow these steps.\n\n1. Go to the Memorystore for Memcached page in the Google Cloud console.\n\n [Memorystore for Memcached](https://console.cloud.google.com/memorystore/memcached/instances) \n\n2. Click the ID of the instance you want to delete.\n\n3. Click the **Delete** button.\n\n4. In the prompt that appears, enter the instance's ID.\n\n5. Click the **Delete** button.\n\nWhat's next\n-----------\n\n- [Connect to a Memcached instance](/memorystore/docs/memcached/connecting-memcached-instance).\n\n- [Use the Auto Discovery service](/memorystore/docs/memcached/using-auto-discovery).\n\n- [Monitor your Memcached instance](/memorystore/docs/memcached/monitoring-instances)."]]
