Interface OutlierDetectionOrBuilder (1.45.0)

public interface OutlierDetectionOrBuilder extends MessageOrBuilder

Implements

MessageOrBuilder

Methods

getBaseEjectionTime()

public abstract Duration getBaseEjectionTime()

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

optional .google.cloud.compute.v1.Duration base_ejection_time = 80997255;

Returns
TypeDescription
Duration

The baseEjectionTime.

getBaseEjectionTimeOrBuilder()

public abstract DurationOrBuilder getBaseEjectionTimeOrBuilder()

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

optional .google.cloud.compute.v1.Duration base_ejection_time = 80997255;

Returns
TypeDescription
DurationOrBuilder

getConsecutiveErrors()

public abstract int getConsecutiveErrors()

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

optional int32 consecutive_errors = 387193248;

Returns
TypeDescription
int

The consecutiveErrors.

getConsecutiveGatewayFailure()

public abstract int getConsecutiveGatewayFailure()

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

optional int32 consecutive_gateway_failure = 417504250;

Returns
TypeDescription
int

The consecutiveGatewayFailure.

getEnforcingConsecutiveErrors()

public abstract int getEnforcingConsecutiveErrors()

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

optional int32 enforcing_consecutive_errors = 213133760;

Returns
TypeDescription
int

The enforcingConsecutiveErrors.

getEnforcingConsecutiveGatewayFailure()

public abstract int getEnforcingConsecutiveGatewayFailure()

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

optional int32 enforcing_consecutive_gateway_failure = 394440666;

Returns
TypeDescription
int

The enforcingConsecutiveGatewayFailure.

getEnforcingSuccessRate()

public abstract int getEnforcingSuccessRate()

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

optional int32 enforcing_success_rate = 194508732;

Returns
TypeDescription
int

The enforcingSuccessRate.

getInterval()

public abstract Duration getInterval()

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

optional .google.cloud.compute.v1.Duration interval = 33547461;

Returns
TypeDescription
Duration

The interval.

getIntervalOrBuilder()

public abstract DurationOrBuilder getIntervalOrBuilder()

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

optional .google.cloud.compute.v1.Duration interval = 33547461;

Returns
TypeDescription
DurationOrBuilder

getMaxEjectionPercent()

public abstract int getMaxEjectionPercent()

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

optional int32 max_ejection_percent = 18436888;

Returns
TypeDescription
int

The maxEjectionPercent.

getSuccessRateMinimumHosts()

public abstract int getSuccessRateMinimumHosts()

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

optional int32 success_rate_minimum_hosts = 525766903;

Returns
TypeDescription
int

The successRateMinimumHosts.

getSuccessRateRequestVolume()

public abstract int getSuccessRateRequestVolume()

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

optional int32 success_rate_request_volume = 281425357;

Returns
TypeDescription
int

The successRateRequestVolume.

getSuccessRateStdevFactor()

public abstract int getSuccessRateStdevFactor()

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

optional int32 success_rate_stdev_factor = 174735773;

Returns
TypeDescription
int

The successRateStdevFactor.

hasBaseEjectionTime()

public abstract boolean hasBaseEjectionTime()

The base time that a backend endpoint is ejected for. Defaults to 30000ms or 30s. After a backend endpoint is returned back to the load balancing pool, it can be ejected again in another ejection analysis. Thus, the total ejection time is equal to the base ejection time multiplied by the number of times the backend endpoint has been ejected. Defaults to 30000ms or 30s.

optional .google.cloud.compute.v1.Duration base_ejection_time = 80997255;

Returns
TypeDescription
boolean

Whether the baseEjectionTime field is set.

hasConsecutiveErrors()

public abstract boolean hasConsecutiveErrors()

Number of consecutive errors before a backend endpoint is ejected from the load balancing pool. When the backend endpoint is accessed over HTTP, a 5xx return code qualifies as an error. Defaults to 5.

optional int32 consecutive_errors = 387193248;

Returns
TypeDescription
boolean

Whether the consecutiveErrors field is set.

hasConsecutiveGatewayFailure()

public abstract boolean hasConsecutiveGatewayFailure()

The number of consecutive gateway failures (502, 503, 504 status or connection errors that are mapped to one of those status codes) before a consecutive gateway failure ejection occurs. Defaults to 3.

optional int32 consecutive_gateway_failure = 417504250;

Returns
TypeDescription
boolean

Whether the consecutiveGatewayFailure field is set.

hasEnforcingConsecutiveErrors()

public abstract boolean hasEnforcingConsecutiveErrors()

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive 5xx. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 0.

optional int32 enforcing_consecutive_errors = 213133760;

Returns
TypeDescription
boolean

Whether the enforcingConsecutiveErrors field is set.

hasEnforcingConsecutiveGatewayFailure()

public abstract boolean hasEnforcingConsecutiveGatewayFailure()

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through consecutive gateway failures. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100.

optional int32 enforcing_consecutive_gateway_failure = 394440666;

Returns
TypeDescription
boolean

Whether the enforcingConsecutiveGatewayFailure field is set.

hasEnforcingSuccessRate()

public abstract boolean hasEnforcingSuccessRate()

The percentage chance that a backend endpoint will be ejected when an outlier status is detected through success rate statistics. This setting can be used to disable ejection or to ramp it up slowly. Defaults to 100. Not supported when the backend service uses Serverless NEG.

optional int32 enforcing_success_rate = 194508732;

Returns
TypeDescription
boolean

Whether the enforcingSuccessRate field is set.

hasInterval()

public abstract boolean hasInterval()

Time interval between ejection analysis sweeps. This can result in both new ejections and backend endpoints being returned to service. The interval is equal to the number of seconds as defined in outlierDetection.interval.seconds plus the number of nanoseconds as defined in outlierDetection.interval.nanos. Defaults to 1 second.

optional .google.cloud.compute.v1.Duration interval = 33547461;

Returns
TypeDescription
boolean

Whether the interval field is set.

hasMaxEjectionPercent()

public abstract boolean hasMaxEjectionPercent()

Maximum percentage of backend endpoints in the load balancing pool for the backend service that can be ejected if the ejection conditions are met. Defaults to 50%.

optional int32 max_ejection_percent = 18436888;

Returns
TypeDescription
boolean

Whether the maxEjectionPercent field is set.

hasSuccessRateMinimumHosts()

public abstract boolean hasSuccessRateMinimumHosts()

The number of backend endpoints in the load balancing pool that must have enough request volume to detect success rate outliers. If the number of backend endpoints is fewer than this setting, outlier detection via success rate statistics is not performed for any backend endpoint in the load balancing pool. Defaults to 5. Not supported when the backend service uses Serverless NEG.

optional int32 success_rate_minimum_hosts = 525766903;

Returns
TypeDescription
boolean

Whether the successRateMinimumHosts field is set.

hasSuccessRateRequestVolume()

public abstract boolean hasSuccessRateRequestVolume()

The minimum number of total requests that must be collected in one interval (as defined by the interval duration above) to include this backend endpoint in success rate based outlier detection. If the volume is lower than this setting, outlier detection via success rate statistics is not performed for that backend endpoint. Defaults to 100. Not supported when the backend service uses Serverless NEG.

optional int32 success_rate_request_volume = 281425357;

Returns
TypeDescription
boolean

Whether the successRateRequestVolume field is set.

hasSuccessRateStdevFactor()

public abstract boolean hasSuccessRateStdevFactor()

This factor is used to determine the ejection threshold for success rate outlier ejection. The ejection threshold is the difference between the mean success rate, and the product of this factor and the standard deviation of the mean success rate: mean - (stdev * successRateStdevFactor). This factor is divided by a thousand to get a double. That is, if the desired factor is 1.9, the runtime value should be 1900. Defaults to 1900. Not supported when the backend service uses Serverless NEG.

optional int32 success_rate_stdev_factor = 174735773;

Returns
TypeDescription
boolean

Whether the successRateStdevFactor field is set.