Em Programação de modificações, selecione Aplicar imediatamente.
Verifique se o grupo de parâmetros está atribuído à instância do banco de dados.
Inicie seu painel do Amazon RDS.
Na Gaveta de navegação, clique em Bancos de dados e selecione a instância do banco de dados.
Clique na guia Configurações.
Verifique se você vê o grupo de parâmetros criado e se o status dele é pending-reboot.
Reinicie a instância do banco de dados para concluir a configuração. Para reiniciar a instância:
Na Gaveta de navegação, clique em Instâncias.
Selecione sua instância do banco de dados.
No menu Ações da instância, selecione Reiniciar.
Criar uma publicação e um slot de replicação
Crie uma publicação. Recomendamos que você crie uma publicação apenas para as tabelas que quer replicar. Isso permite que o Datastream leia apenas
os dados relevantes e reduza a carga no banco de dados e no Datastream:
CREATE PUBLICATION PUBLICATION_NAME
FOR TABLE SCHEMA1.TABLE1, SCHEMA2.TABLE2;
Substitua:
PUBLICATION_NAME: o nome da sua publicação. Você
precisa fornecer esse nome ao criar um stream no assistente de criação de streams do
Datastream.
SCHEMA: o nome do esquema que contém a tabela.
TABLE: o nome da tabela que você quer replicar.
Também é possível criar uma publicação para todas as tabelas no seu banco de dados. Essa abordagem aumenta a carga no banco de dados de origem e no Datastream:
CREATE PUBLICATION PUBLICATION_NAME FOR ALL TABLES;
Para criar um slot de replicação, digite o seguinte comando do PostgreSQL:
REPLICATION_SLOT_NAME: o nome do slot de replicação. Você
precisa fornecer esse nome ao criar um stream no assistente de criação de streams do
Datastream.
Criar um usuário do Datastream
Para criar um usuário do Datastream, digite o seguinte comando do PostgreSQL:
CREATE USER USER_NAME WITH ENCRYPTED PASSWORD 'USER_PASSWORD';
Substitua:
USER_NAME: o nome do usuário do Datastream que você
quer criar.
USER_PASSWORD: a senha de login do usuário do Datastream que você quer criar.
Conceda os seguintes privilégios ao usuário que você criou:
GRANT RDS_REPLICATION TO USER_NAME;
GRANT SELECT ON ALL TABLES IN SCHEMA SCHEMA_NAME TO USER_NAME;
GRANT USAGE ON SCHEMA SCHEMA_NAME TO USER_NAME;
ALTER DEFAULT PRIVILEGES IN SCHEMA SCHEMA_NAME
GRANT SELECT ON TABLES TO USER_NAME;
Substitua:
USER_NAME: o usuário a quem você quer conceder os privilégios.
SCHEMA_NAME: o nome do esquema a que você quer conceder
os privilégios.
[[["Fácil de entender","easyToUnderstand","thumb-up"],["Meu problema foi resolvido","solvedMyProblem","thumb-up"],["Outro","otherUp","thumb-up"]],[["Difícil de entender","hardToUnderstand","thumb-down"],["Informações incorretas ou exemplo de código","incorrectInformationOrSampleCode","thumb-down"],["Não contém as informações/amostras de que eu preciso","missingTheInformationSamplesINeed","thumb-down"],["Problema na tradução","translationIssue","thumb-down"],["Outro","otherDown","thumb-down"]],["Última atualização 2025-09-04 UTC."],[[["\u003cp\u003eThis page outlines the steps to configure Change Data Capture (CDC) for an Amazon RDS for PostgreSQL database, beginning with creating and modifying a database parameter group.\u003c/p\u003e\n"],["\u003cp\u003eConfiguring the source database involves assigning the newly created parameter group and applying it immediately, which requires a mandatory wait period for these changes to be properly applied.\u003c/p\u003e\n"],["\u003cp\u003eTo enable CDC, you must create a publication, either for specific tables or all tables, and a replication slot within the PostgreSQL database to track data changes.\u003c/p\u003e\n"],["\u003cp\u003eA dedicated Datastream user must be created with specific privileges like \u003ccode\u003eRDS_REPLICATION\u003c/code\u003e and \u003ccode\u003eSELECT\u003c/code\u003e access on relevant tables and schemas to facilitate data replication.\u003c/p\u003e\n"],["\u003cp\u003eVerifying the correct parameter group assignment requires a reboot of the database instance, after which the parameter group status should show as in-sync, indicating successful application of the changes.\u003c/p\u003e\n"]]],[],null,["# Configure an Amazon RDS PostgreSQL database\n\nThe following page covers how to configure CDC for an Amazon RDS for PostgreSQL database.\n\n### Create a parameter group\n\n1. Launch your Amazon RDS Dashboard.\n\n2. In the **Navigation Drawer** , click **Parameter Groups** , and then click **Create Parameter Group** . The **Create Parameter Group** page appears.\n\n3. Select the database family that matches your database, provide a name and description for the parameter group, and then click **Create**.\n\n4. Select the checkbox to the left of your newly created parameter group, and then, under **Parameter group actions** , click **Edit**.\n\n5. Set the following parameter for your group.\n\n6. Click **Save Changes**.\n\n | For PostgreSQL 13 and later, it is recommended that you also set the `max_slot_wal_keep_size` parameter in the `postgresql.conf` file to limit the amount of storage used by replication slots. For more information, see [Work with PostgreSQL database WAL log files](/datastream/docs/work-with-postgresql-database-wal-log-files).\n\n### Configure the source database\n\n1. Launch your Amazon RDS Dashboard.\n\n2. In the **Navigation Drawer** , click **Databases**.\n\n3. Select your source, and then click **Modify**.\n\n4. Go to the **Additional configuration** section.\n\n5. Select the parameter group that you [created](#create-a-parameter-group-rds).\n\n6. Click **Continue**.\n\n7. Under **Scheduling of modifications** , select **Apply immediately**.\n\n | Because you modified your source, you must wait until the changes to your parameter group are applied before proceeding.\n\n### Verify that the parameter group is assigned to the database instance\n\n1. Launch your Amazon RDS Dashboard.\n\n2. In the **Navigation Drawer** , click **Databases**, and then select your database instance.\n\n3. Click the **Configurations** tab.\n\n4. Verify that you see the parameter group that you [created](#create-a-parameter-group-rds), and that its status is **pending-reboot**.\n\n5. Reboot your database instance to complete the configuration. To reboot the instance:\n\n 1. In the **Navigation Drawer** , click **Instances**.\n 2. Select your database instance.\n 3. From the **Instance Actions** menu, select **Reboot**.\n\n | After you reboot your database instance, its status changes to **in-sync**.\n\n### Create a publication and a replication slot\n\n1. Create a publication. We recommend that you create a publication only for the\n tables that you want to replicate. This allows Datastream to read-only\n the relevant data, and lowers the load on the database and Datastream:\n\n ```\n CREATE PUBLICATION PUBLICATION_NAME\n FOR TABLE SCHEMA1.TABLE1, SCHEMA2.TABLE2;\n ```\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003ePUBLICATION_NAME\u003c/var\u003e: The name of your publication. You'll need to provide this name when you create a stream in the Datastream stream creation wizard.\n - \u003cvar translate=\"no\"\u003eSCHEMA\u003c/var\u003e: The name of the schema that contains the table.\n - \u003cvar translate=\"no\"\u003eTABLE\u003c/var\u003e: The name of the table that you want to replicate.\n\n You can also create a publication for all tables in your database. Note that\n this approach increases the load on both the source database and Datastream: \n\n ```\n CREATE PUBLICATION PUBLICATION_NAME FOR ALL TABLES;\n ```\n | For PostgreSQL 15 and later, you can create a publication for all tables in a schema. This approach lets you replicate changes for tables in the specified list of schemas, including tables that you create in the future: \n |\n | ```\n | CREATE PUBLICATION PUBLICATION_NAME\n | FOR TABLES IN SCHEMA SCHEMA1, SCHEMA2;\n | ```\n2. Create a replication slot by entering the following PostgreSQL command:\n\n ```\n SELECT PG_CREATE_LOGICAL_REPLICATION_SLOT('REPLICATION_SLOT_NAME', 'pgoutput'); \n ```\n\n \u003cbr /\u003e\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003eREPLICATION_SLOT_NAME\u003c/var\u003e: The name of your replication slot. You'll need to provide this name when you create a stream in the Datastream stream creation wizard.\n\n | The replication slot must be unique for each stream that's replicating from this database.\n\n### Create a Datastream user\n\n1. To create a Datastream user, enter the following PostgreSQL command:\n\n ```\n CREATE USER USER_NAME WITH ENCRYPTED PASSWORD 'USER_PASSWORD';\n ```\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003eUSER_NAME\u003c/var\u003e: The name of the Datastream user that you want to create.\n - \u003cvar translate=\"no\"\u003eUSER_PASSWORD\u003c/var\u003e: The login password for the Datastream user that you want to create.\n2. Grant the following privileges to the user you created:\n\n ```\n GRANT RDS_REPLICATION TO USER_NAME;\n GRANT SELECT ON ALL TABLES IN SCHEMA SCHEMA_NAME TO USER_NAME;\n GRANT USAGE ON SCHEMA SCHEMA_NAME TO USER_NAME;\n ALTER DEFAULT PRIVILEGES IN SCHEMA SCHEMA_NAME\n GRANT SELECT ON TABLES TO USER_NAME;\n ```\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003eUSER_NAME\u003c/var\u003e: The user to whom you want to grant the privileges.\n - \u003cvar translate=\"no\"\u003eSCHEMA_NAME\u003c/var\u003e: The name of the schema to which you want to grant the privileges.\n\nWhat's next\n-----------\n\n- Learn more about how Datastream works with [PostgreSQL sources](/datastream/docs/sources-postgresql)."]]
