정책 오류 참조

{
   "fault":{
     "faultstring":"Access Denied for client ip : 52.211.243.3"
      "detail":{
         "errorcode":"steps.accesscontrol.IPDeniedAccess"
      }
   }
}

<FaultRule name="IPDeniedAccess">
    <Step>
        <Name>AM-IPDeniedAccess</Name>
        <Condition>(fault.name Matches "IPDeniedAccess") </Condition>
    </Step>
    <Condition>(acl.failed = true) </Condition>
</FaultRule>

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.assignmessage.VariableOfNonMsgType"
      },
      "faultstring":"AssignMessage[AM-SetResponse]: value of variable is not of type Message"
   }
}

<FaultRule name="Assign Message Faults">
    <Step>
        <Name>AM-CustomNonMessageTypeErrorResponse</Name>
        <Condition>(fault.name Matches "VariableOfNonMsgType") </Condition>
    </Step>
    <Step>
        <Name>AM-CustomSetVariableErrorResponse</Name>
        <Condition>(fault.name = "SetVariableFailed")</Condition>
    </Step>
    <Condition>(assignmessage.failed = true) </Condition>
</FaultRule>

{  
   "fault":{  
      "detail":{  
         "errorcode":"steps.basicauthentication.UnresolvedVariable"
      },
      "faultstring":"Unresolved variable : request.queryparam.password"
   }
}

<FaultRule name="Basic Authentication Faults">
    <Step>
        <Name>AM-UnresolvedVariable</Name>
        <Condition>(fault.name Matches "UnresolvedVariable") </Condition>
    </Step>
    <Step>
        <Name>AM-AuthFailedResponse</Name>
        <Condition>(fault.name = "InvalidBasicAuthenticationSource")</Condition>
    </Step>
    <Condition>(BasicAuthentication.BA-Authentication.failed = true) </Condition>
</FaultRule>

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "InvalidToken")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

{
   "fault":{
      "detail":{
         "errorcode":"steps.extractvariables.SourceMessageNotAvailable"
      },
      "faultstring":"request message is not available for ExtractVariable: EV-ParseJsonResponse"
   }
}

<FaultRule name="Extract Variable Faults">
    <Step>
        <Name>AM-CustomErrorMessage</Name>
        <Condition>(fault.name = "SourceMessageNotAvailable") </Condition>
    </Step>
    <Condition>(extractvariables.EM-ParseJsonResponse.failed = true) </Condition>
</FaultRule>

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "InvalidToken")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

{  
   "fault":{  
      "faultstring":"Failed to execute JavaCallout. [policy_name]",
      "detail":{  
         "errorcode":"javacallout.ExecutionError"
      }
   }
}

<FaultRule name="JavaCalloutFailed">
    <Step>
        <Name>AM-JavaCalloutError</Name>
    </Step>
    <Condition>(fault.name Matches "ExecutionError") </Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Javascript runtime error: "ReferenceError: "status" is not defined. (setresponse.js:6)\"",
    "detail": {
      "errorcode": "steps.javascript.ScriptExecutionFailed"
    }
  }
}

<FaultRule name="JavaScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(javascript.JavaScript-1.failed = true) </Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "JSONThreatProtection[JPT-SecureRequest]: Execution failed. reason: JSONThreatProtection[JTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.jsonthreatprotection.ExecutionFailed"
    }
  }
}

<FaultRule name="JSONThreatProtection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(jsonattack.JPT-SecureRequest.failed = true) </Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "JSONToXML[JSON-to-XML-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.json2xml.SourceUnavailable"
    }
  }
}

<FaultRule name="JSON To XML Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadJSON</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(jsontoxml.JSON-to-XML-1.failed = true) </Condition>
</FaultRule>

{  
   "fault":{
      "detail":{
         "errorcode":"steps.messagelogging.StepDefinitionExecutionFailed"
      },
      "faultstring":"Execution failed"
   }
}

<FaultRule name="MessageLogging">
    <Step>
        <Name>ML-LogMessages</Name>
        <Condition>(fault.name Matches "StepDefinitionExecutionFailed") </Condition>
    </Step>
    <Condition>(messagelogging.ML-LogMessages.failed = true) </Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "[entry] can not be cached. Only serializable entries are cached.",
    "detail": {
      "errorcode": "steps.populatecache.EntryCannotBeCached"
    }
  }
}

<FaultRule name="Populate Cache Fault">
    <Step>
        <Name>AM-EntryCannotBeCached</Name>
        <Condition>(fault.name Matches "EntryCannotBeCached") </Condition>
    </Step>
    <Condition>(populatecache.POP-CACHE-1.failed = true) </Condition>
</FaultRule>

{"ErrorCode" : "invalid_client", "Error" :"ClientId is Invalid"}

{  
   {  
      "fault":{  
         "faultstring":"Invalid Access Token",
         "detail":{  
            "errorcode":"keymanagement.service.invalid_access_token"
         }
      }
   }

<FaultRule name="OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientResponse</Name>
        <Condition>(fault.name = "invalid_client") OR (fault.name = "InvalidClientIdentifier")</Condition>
    </Step>
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

{  
   "fault":{  
      "faultstring":"ClientId is Invalid",
      "detail":{  
         "errorcode":"keymanagement.service.invalid_client-invalid_client_id"
      }
   }
}

<FaultRule name="OAuthV2 Faults">
    <Step>
        <Name>AM-InvalidClientIdResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_client-invalid_client_id")</Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

<FaultRule name=SetOAuthV2Info Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
        <Condition>(fault.name = "invalid_access_token")</Condition>
    </Step>
    <Condition>(oauthV2.failed = true) </Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "Invalid Access Token",
    "detail": {
      "errorcode": "keymanagement.service.invalid_access_token"
    }
  }
}

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="DeleteOAuthV2Info_Faults">
    <Step>
        <Name>AM-InvalidTokenResponse</Name>
    </Step>
    <Condition>(fault.name = "invalid_access_token")</Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "Execution of SetResponse failed with error: Pythonscript runtime error: "ReferenceError: "status" is not defined.\"",
    "detail": {
      "errorcode": "steps.script.ScriptExecutionFailed"
    }
  }
}

<FaultRule name="PythonScript Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ScriptExecutionFailed") </Condition>
    </Step>
    <Condition>(pythonscript.PythonScript-1.failed = true) </Condition>
</FaultRule>

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.QuotaViolation"
      },
      "faultstring":"Rate limit quota violation. Quota limit  exceeded. Identifier : _default"
   }
}

<FaultRules>
    <FaultRule name="Quota Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "QuotaViolation") </Condition>
        </Step>
        <Condition>ratelimit.Quota-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

{
   "fault":{
      "detail":{
         "errorcode":"steps.raisefault.RaiseFault"
      },
      "faultstring":"Raising fault. Fault name: [name]"
   }
}

{
  "fault": {
    "faultstring": "GenerateSAMLAssertion[GenSAMLAssert]: Invalid media type",
    "detail": {
      "errorcode": "steps.saml.generate.InvalidMediaTpe"
    }
  }
}

<FaultRules>
    <FaultRule name="invalid_saml_rule">
        <Step>
            <Name>invalid-saml</Name>
        </Step>
        <Condition>(GenerateSAMLAssertion.failed = "true")</Condition>
    </FaultRule>
</FaultRules>

{
   "fault":{
      "detail":{
         "errorcode":"steps.servicecallout.RequestVariableNotMessageType"
      },
      "faultstring":"ServiceCallout[ServiceCalloutGetMockResponse]:
            request variable data_str value is not of type Message"
   }
}

<FaultRule name="RequestVariableNotMessageType">
    <Step>
        <Name>AM-RequestVariableNotMessageType</Name>
    </Step>
    <Condition>(fault.name = "RequestVariableNotMessageType")</Condition>
</FaultRule>

{  
   "fault":{  
      "detail":{  
         "errorcode":"policies.ratelimit.SpikeArrestViolation"
      },
      "faultstring":"Spike arrest violation. Allowed rate : 10ps"
   }
}

<FaultRules>
    <FaultRule name="Spike Arrest Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "SpikeArrestViolation") </Condition>
        </Step>
        <Condition>ratelimit.Spike-Arrest-1.failed=true</Condition>
    </FaultRule>
</FaultRules>

{  
   "fault":{  
      "faultstring":"Invalid ApiKey",
      "detail":{  
         "errorcode":"oauth.v2.InvalidApiKey"
      }
   }
}

{  
   "fault":{  
      "detail":{  
         "errorcode":"keymanagement.service.DeveloperStatusNotActive"
      },
      "faultstring":"Developer Status is not Active"
   }
}

<FaultRule name="FailedToResolveAPIKey">
    <Step>
        <Name>AM-FailedToResolveAPIKey</Name>
    </Step>
    <Condition>(fault.name Matches "FailedToResolveAPIKey") </Condition>
</FaultRule>

<FaultRules>
    <FaultRule name="JWS Policy Errors">
        <Step>
            <Name>JavaScript-1</Name>
            <Condition>(fault.name Matches "TokenExpired")</Condition>
        </Step>
        <Condition>JWS.failed=true</Condition>
    </FaultRule>
</FaultRules>

    <FaultRules>
        <FaultRule name="JWT Policy Errors">
            <Step>
                <Name>JavaScript-1</Name>
                <Condition>(fault.name Matches "InvalidToken")</Condition>
            </Step>
            <Condition>JWT.failed=true</Condition>
        </FaultRule>
    </FaultRules>
    

{
  "fault": {
    "faultstring": "XMLThreatProtection[XPT-SecureRequest]: Execution failed. reason: XMLThreatProtection[XTP-SecureRequest]: Exceeded object entry name length at line 2",
    "detail": {
      "errorcode": "steps.xmlthreatprotection.ExecutionFailed"
    }
  }
}

<FaultRule name="XML Threat Protection Policy Faults">
    <Step>
        <Name>AM-CustomErrorResponse</Name>
        <Condition>(fault.name Matches "ExecutionFailed") </Condition>
    </Step>
    <Condition>(xmlattack.XPT-SecureRequest.failed = true) </Condition>
</FaultRule>

{
  "fault": {
    "faultstring": "XMLToJSON[XMLtoJSON-1]: Source xyz is not available",
    "detail": {
      "errorcode": "steps.xml2json.SourceUnavailable"
    }
  }
}

<faultrule name="VariableOfNonMsgType"></faultrule><FaultRule name="XML to JSON Faults">
    <Step>
        <Name>AM-SourceUnavailableMessage</Name>
        <Condition>(fault.name Matches "SourceUnavailable") </Condition>
    </Step>
    <Step>
        <Name>AM-BadXML</Name>
        <Condition>(fault.name = "ExecutionFailed")</Condition>
    </Step>
    <Condition>(xmltojson.XMLtoJSON-1.failed = true) </Condition>
</FaultRule>