Replicate data between AlloyDB and AlloyDB Omni

This page provides an overview of pglogical in AlloyDB Omni, its benefits and limitations.

This page also provides steps to replicate data between Google Cloud AlloyDB and AlloyDB Omni using the pglogical extension.

Key components of pglogical

Key components of the pglogical extension includes the following:

  • Node: reference given for the database within a PostgreSQL cluster. The pglogical extension is installed into, and works against any number of databases within the cluster, and each acts as a distinct pglogical node. Each node can be either a provider also known as replication source or subscriber also known as replication target, or both concurrently. Only one node is allowed per database.
  • Replication set: defined in the provider database as a logical grouping of tables and sequences to be migrated, and the SQL statements such as INSERT, UPDATE, DELETE, TRUNCATE that need to replicated. You can assign tables to more than one replication set. By default, three pre-configured replication sets such as default, default_insert_only, and ddl_sql are provided, and you can add any number of additional replication sets to meet your needs.
  • Subscription: provides details of the changes that are replicated from provider databases and changes that are replicated from provider databases, in the subscriber database. The subscription specifies the provider database through a connection string, and optionally, which replication sets from that provider should be copied. Additional, you can also specify whether to use apply delay when you create the subscription.

In this deployment, the Google Cloud AlloyDB service is the provider and the on-premises AlloyDB Omni is the subscriber. Note that the opposite configuration is also possible.

Supported authentication methods

You must consider networking and security between the replication nodes before implementing the pglogical extension on AlloyDB Omni. The two main authentication methods used with the pglogical extension are password and trust authentication methods.

The recommended authentication method is trust authentication because in the password authentication method, passwords are stored in plain text format in database tables owned by pglogical. These passwords are visible in plain text to anyone with database permissions to query these tables, in non-binary backups, and in the PostgreSQL log files.

If you are using the trust authentication method, you must make specific entries in the host-based authentication file, pg_hba.conf for maximum security. You can restrict the access by specifying the target databases, permitting only the replication option or specific databases, the replication user, and only from the subscriber's specific IP address.

Before you begin

You can install pglogical as an extension within a given database.

Before implementing the pglogical extension on AlloyDB Omni, ensure that you meet the following system requirements:

  • A Google Cloud AlloyDB cluster, and read/write access to the primary instance as a Cloud AlloyDB Admin. For instructions on how to provision a Google Cloud AlloyDB cluster, see Create and connect to a database.
  • An AlloyDB Omni server, installed and configured. For instructions on how to install AlloyDB Omni, see Install AlloyDB Omni.
  • The IP addresses for both the Google Cloud AlloyDB's primary instance and the AlloyDB Omni host server.
  • An established and secured network between the Google Cloud AlloyDB and the AlloyDB Omni host server. TCP connectivity on the standard PostgreSQL port of 5432 is required.

Adjust parameters on the Google Cloud AlloyDB provider

The pglogical extension requires a minimal set of parameter adjustments on the Google Cloud AlloyDB provider cluster. You must set the wal_level parameter to logical, and append pglogical to the shared_preload_libraries parameter in the postgresql.conf file.

   cp postgresql.conf postgresql.bak
   sed -r -i "s|(\#)?wal_level\s*=.*|wal_level=logical|" postgresql.conf
   sed -r -i "s|(\#)?(shared_preload_libraries\s*=\s*)'(.*)'.*$|\2'\3,pglogical'|" postgresql.conf
   sed -r -i "s|',|'|" postgresql.conf

In the Google Cloud AlloyDB service, you can adjust parameters by setting the appropriate cluster flags.

You must adjust parameters for the following Google Cloud AlloyDB flags:

  • alloydb.enable_pglogical = on
  • alloydb.logical_decoding = on

For information about how to set database flags in Google Cloud AlloyDB, see Configure an instance's database flags.

For the other required provider-node database parameters, you must set the Google Cloud AlloyDB default values as follows:

  • max_worker_processes: one per provider database and at least one per subscriber node. At least 10 is the standard for this parameter.
  • max_replication_slots: one per node on provider nodes.
  • max_wal_senders: one per node on provider nodes.
  • track_commit_timestamp: set to on if the last or first update wins conflict resolution is required.
  • listen_addresses: must include the AlloyDB Omni IP address or mention through a covering CIDR block.

You can check these parameters using any query tool, such as psql.

Adjust parameters on the AlloyDB Omni subscriber cluster

The pglogicalextension requires a minimal set of parameter adjustments on the AlloyDB Omni subscriber too. You must append pglogical to the shared_preload_libraries parameter in the /var/alloydb/config/postgresql.conf file. If any database within the cluster acts as a provider database, then make the parameter changes required for provider databases.

  1. Adjust the parameters:

    sudo sed -r -i "s|(shared_preload_libraries\s*=\s*)'(.*)'.*$|\1'\2,pglogical'|" /var/alloydb/config/postgresql.conf
  2. Verify that the parameter is set properly:

    grep -iE 'shared_preload_libraries' /var/alloydb/config/postgresql.conf
  3. Using the AlloyDB Omni CLI, restart AlloyDB Omni for the parameter change to take effect:

    sudo alloydb database-server stop
    sudo alloydb database-server start
  4. Set the AlloyDB Omni default values for other provider database parameters:

    • max_worker_processes: One per provider database and one per subscriber node.
    • track_commit_timestamp: Set to on if the last/first update wins conflict resolution is required.
  5. Confirm all parameter values are relevant:

    docker exec pg-service psql -h localhost -U postgres -c "
    SELECT name, setting
      FROM pg_catalog.pg_settings
     WHERE name IN ('listen_addresses',
                    'wal_level',
                    'shared_preload_libraries',
                    'max_worker_processes',
                    'max_replication_slots',
                    'max_wal_senders',
                    'track_commit_timestamp')
         ORDER BY name;
    "

Host-based authentication adjustments to the AlloyDB Omni subscriber cluster

The pglogical makes local TCP connections to the AlloyDB Omni subscriber database. Therefore, you must add the subscriber's host server's IP address to the AlloyDB Omni /var/alloydb/config/pg_hba.conf file.

  1. Add a trust authentication entry for the local server, specific to a new pglogical_replication user, to the /var/alloydb/config/pg_hba.conf file:

    echo -e "# pglogical entries:
    host all pglogical_replication samehost trust
    " | column -t | sudo tee -a /var/alloydb/config/pg_hba.conf
  2. Verify that the entry is correct:

    tail -2 /var/alloydb/config/pg_hba.conf
  3. Using the AlloyDB Omni CLI, restart AlloyDB Omni for the authentication change to take effect:

    sudo alloydb database-server stop
    sudo alloydb database-server start

Create a pglogical user in provider and subscriber clusters

You must create a new user in both the provider and subscriber cluster. pglogical requires the user to have both the superuser and replication attributes.

  1. In the Google Cloud AlloyDB provider cluster, create the user and grant the alloydbsuperuser role:

    CREATE USER pglogical_replication LOGIN PASSWORD 'secret';
    ALTER USER pglogical_replication WITH replication;
    GRANT alloydbsuperuser TO pglogical_replication;
    
  2. In the AlloyDB Omni subscriber cluster, create the user and grant the replication and superuser attributes:

    CREATE USER pglogical_replication LOGIN PASSWORD 'secret';
    ALTER USER pglogical_replication WITH replication;
    ALTER USER pglogical_replication WITH superuser;
    

Add pglogical and nodes to the Google Cloud AlloyDB provider database

  1. Grant required privileges.

    You must install the pglogical extension in each database and grant the usage permission to the pglogical database user. In Google Cloud AlloyDB, you must grant privileges on the pglogical schema.

    For example, if your database is my_test_db, run the following command against the Google Cloud AlloyDB provider database:

       \c my_test_db;
     CREATE EXTENSION IF NOT EXISTS pglogical;
     GRANT usage ON SCHEMA pglogical TO pglogical_replication;
    -- For Google Cloud AlloyDB we also need to manually grant privileges:
     GRANT ALL PRIVILEGES ON ALL tables IN SCHEMA pglogical TO pglogical_replication;
    
  2. Create a pglogical node for the provider databases. The node_name is arbitrary and the dsn string must be a valid TCP connection back to the same database. For Google Cloud AlloyDB, the host part of the dsn is the IP address provided for the primary instance.

    For Google Cloud AlloyDB, trust authentication is not permitted, and the password argument must be included in the dsn. parameter.

    For example, for the my_test_db database, run the following command:

    SELECT pglogical.create_node(node_name := 'provider', dsn := 'host=SERVER_IP_ADDRESS
    port=5432 dbname=my_test_db user=pglogical_replication password=secret');
    

Create a table and add it to the default replication set

Create a table and add it to the default replication set on the Google Cloud AlloyDB provider database.

  1. Create a test table called test_table_1 in the provider database:

    CREATE TABLE test_table_1 (col1 INT PRIMARY KEY);
    INSERT INTO test_table_1 VALUES (1),(2),(3);
    
  2. Grant SELECT on the individual tables or run the GRANT SELECT ON ALL TABLES command. Any tables that are to be part of a replication set must have query permission granted to the replication user, pglogical_replication.

    GRANT SELECT ON ALL TABLES IN SCHEMA public TO pglogical_replication;
    
  3. Manually add the test table to the default replication set. You can either create custom pglogical replication sets, or you can use the default replication sets. Several default replication sets such as default, default_insert_only, and ddl_sqlwere created when you created the extension. You can add tables and sequences to the replication sets individually, or all at once for a specified schema.

    -- Add the specified table to the default replication set:
    SELECT pglogical.replication_set_add_table(set_name := 'default', relation := 'test_table_1', synchronize_data := TRUE);
    
    -- Check which tables have been added to all replication sets:
    SELECT * FROM pglogical.replication_set_table;
    
  4. (Optional) Add all tables in a specified schema, such as public:

    -- Add all "public" schema tables to the default replication set:
    SELECT pglogical.replication_set_add_all_tables('default', ARRAY['public']);
    
    -- Check which tables have been added to all replication sets:
    SELECT * FROM pglogical.replication_set_table;
    
    -- Add all "public" schema sequences to the default replication:
    SELECT pglogical.replication_set_add_all_sequences('default', ARRAY['public']);
    
     -- Check which sequences have been added to all replication sets:
    SELECT * FROM pglogical.replication_set_seq;
    
  5. Remove the table from the default replication set. If there are any tables in the schema that do not have a primary key, then you can either set it up for INSERT only replication or set the columns that uniquely identify the row by using the REPLICA IDENTITY feature used with the ALTER TABLE command. If you have added those tables to the default replication set automatically using the replication_set_add_all_tables function, then you must manually remove them from that replication set and add them to the default_insert_only set.

    -- Remove the table from the **default** replication set:
    SELECT pglogical.replication_set_remove_table(set_name := 'default', relation := 'test_table_2');
    
    -- Manually add to the **default_insert_only** replication set:
    SELECT pglogical.replication_set_add_table(set_name := 'default_insert_only', relation := 'test_table_2');
    

    Optionally, if you want to add the newly created tables to the replication set automatically, add the pglogical_assign_repset trigger as suggested in the pglogical source.

Copy the database to the AlloyDB Omni subscriber cluster

  1. Create a schema-only backup of the source database using the pg_dump utility.

  2. Run the pg_dumpcommand from your AlloyDB Omni subscriber server using the IP address of the Google Cloud AlloyDB primary instance.

    pg_dump -h SERVER_IP_ADDRESS -U postgres --create --schema-only my_test_db > my_test_db.schema-only.sql
  3. Import the backup into the subscriber database on the subscriber AlloyDB Omni server:

    docker exec -i pg-service psql -h localhost -U postgres < my_test_db.schema-only.sql

Ignore errors such as alloydbsuperuser not existing. This role is specific to Google Cloud AlloyDB.

This creates the database and the schema, without any of the row data. Row data is replicated by the pglogical extension. Manually copy or recreate any other users or roles that are required.

Create a node and subscription on the AlloyDB Omni subscriber database

  1. Create a node on the AlloyDB Omni subscriber database:

    docker exec pg-service psql -h localhost -U postgres -d my_test_db -c "
    SELECT pglogical.create_node(node_name := 'subscriber', dsn := 'host=localhost port=5432 dbname=my_test_db user=pglogical_replication');
    "
  2. Create a subscription in the subscriber database, pointing back to the Google Cloud AlloyDB provider database's primary instance.

    docker exec pg-service psql -h localhost -U postgres -d my_test_db -c "
    SELECT pglogical.create_subscription(subscription_name := 'test_sub_1', provider_dsn := 'host=SERVER_IP_ADDRESS port=5432 dbname=my_test_db user=pglogical_replication password=secret');
    "
  3. Within a few seconds or minutes, the initial data should have replicated from the provider to the subscriber:

    docker exec pg-service psql -h localhost -U postgres -d my_test_db -c "
    SELECT * FROM test_table_1 ORDER BY 1;
    "

    Additional rows that are added to the provider database are also replicated within seconds.

Additional pglogical deployment considerations

The pglogical extension has many advanced features that not covered in this document. Many of these features are applicable to your implementation. You can consider the following advanced features:

  • Conflict resolution
  • Multimaster and bi-directional replication
  • Inclusion of sequences
  • Switchover and failover procedures

What's next