Cloud Storage is a key part of storing and working with Big Data on Google Cloud. For example, you can use Cloud Storage to load data into BigQuery, hold staging files and temporary data for Dataflow pipelines, and integrate with Dataproc, so you can run Apache Hadoop or Apache Spark jobs directly on your data in Cloud Storage.
This page describes how to use the gcloud command-line tool to accomplish big data tasks, such as copying large files or copying many files in parallel. For an introduction to gcloud, see the gcloud quickstart.
Before you begin
To get the most out of the examples shown on this page, you'll need to complete the following (if you haven't yet):
- Install the gcloud CLI.
- Initialize the gcloud CLI.
Copying many files to a bucket
The cp command efficiently uploads large numbers of files by automatically
performing parallel (multi-threaded/multi-processing) copies as needed. To
recursively copy subdirectories, use the --recursive flag in the command.
For example, to copy files including subdirectories from a local directory
named top-level-dir to a bucket, you can use:
gcloud storage cp top-level-dir gs://example-bucket --recursive
You can use wildcards to match a specific set of
names for an operation. For example, to copy only files that start with image:
gcloud storage cp top-level-dir/subdir/image* gs://example-bucket --recursive
You can remove files using the same wildcard:
gcloud storage rm gs://example-bucket/top-level-dir/subdir/image*
In addition to copying local files to the cloud and vice versa, you can also copy in the cloud, for example:
gcloud storage cp gs://example-bucket/top-level-dir/subdir/** gs://example-bucket/top-level-dir/subdir/subdir2
gcloud storage automatically detects that you're moving multiple files and
creates them in a new directory named subdir2.
Synchronizing a local directory
If you want to synchronize a local directory with a bucket or vice versa,
you can do that with the gcloud storage rsync command. For example,
to make gs://example-bucket match the contents of the local directory
local-dir you can use:
gcloud storage rsync local-dir gs://example-bucket --recursive
If you use the --delete-unmatched-destination-objects flag, it signals the
command to delete files at the destination
(gs://example-bucket in the command above) that aren't present at the
source (local-dir). You can also synchronize between two buckets.
Copying large files to a bucket
In general, when working with big data, once your data is in the cloud it should stay there. Once your data is in Google Cloud, it's very fast to transfer it to other services in the same location, such as Compute Engine.
To copy a large local file to a bucket, use:
gcloud storage cp local-file gs://example-bucket
To copy a large file from an existing bucket, use:
gcloud storage cp gs://example-source-bucket/file gs://example-destination-bucket
gcloud storage takes full advantage of Cloud Storage resumable upload and
download features. For large files this is particularly important because the
likelihood of a network failure at your ISP increases with the size of the data
being transferred. By resuming an upload based on how many bytes the server
actually received, gcloud storage avoids
unnecessarily resending bytes and ensures that the upload can eventually
be completed. The same logic is applied for downloads based on the size of the
local file.
Configuring a bucket
Typical big data tasks where you will want to configure a bucket include when you move data to a different storage class, configure object versioning, or set up a lifecycle rule.
You can list a bucket's configuration details with buckets describe:
gcloud storage buckets describe gs://example-bucket
In the output, notice the bucket configuration information, most of which is
also configurable via gcloud storage:
- CORS: controls Cross-Origin-Resource-Sharing settings for a bucket.
- Website: allows objects in the bucket to act as web pages or be used as static assets in a website.
- Versioning: causes deletes on objects in the bucket to create noncurrent versions.
- Storage Class: allows you to set the set storage class during bucket creation.
- Lifecycle: allows periodic operations to run on the bucket - the most common is stale object deletion.
For example, suppose you only want to keep files in a particular bucket around for just one day, then you can set up the lifecycle rule for the bucket with:
echo '{ "rule": [{ "action": {"type": "Delete"}, "condition": {"age": 1}}]}' > lifecycle_config.json
gcloud storage buckets update gs://example-bucket --lifecycle-file=lifecycle_config.json
Now, any objects in your bucket older than a day will automatically get deleted
from this bucket. You can verify the configuration you just set with the
buckets describe command (other configuration commands work in a
similar fashion):
gcloud storage buckets describe gs://example-bucket
Sharing data in a bucket
When working with big data, you will likely work on files collaboratively and
you'll need to be able to give access to specific people or groups.
Identity and Access Management policies define who can access your files and what they're allowed
to do. You can view a bucket's IAM policy using the
buckets get-iam-policy command:
gcloud storage buckets get-iam-policy gs://example-bucket
The response to the command shows principals, which are accounts that are granted access to your bucket, and roles, which are groups of permissions granted to the principals.
Three common scenarios for sharing data are sharing publicly, sharing with a group, and sharing with a person:
Sharing publicly: For a bucket whose contents are meant to be listed and read by anyone on the Internet, you can configure the IAM policy using the 'AllUsers' designation:
gcloud storage buckets add-iam-policy-binding gs://example-bucket --member=allUsers --role=roles/storage.objectViewer
Sharing with a group: For collaborators who do not have access to your other Google Cloud resources, we recommend that you create a Google group and then add the Google group to the bucket. For example, to give access to the
my-groupGoogle Group, you can configure the following IAM policy:gcloud storage buckets add-iam-policy-binding gs://example-bucket --member=group:my-group@googlegroups.com --role=roles/storage.objectViewer
For more information, see Using a Group to Control Access to Objects.
Sharing with one person: For many collaborators, use a group to give access in bulk. For one person, you can grant read access as follows:
gcloud storage buckets add-iam-policy-binding gs://example-bucket --member=user:liz@gmail.com --role=roles/storage.objectViewer
Cleaning up a bucket
You can clean a bucket quickly with the following command:
gcloud storage rm gs://example-bucket/ --recursive
Working with checksums
When performing copies, the gcloud storage cp and gcloud storage rsync
commands validate that the checksum of the source file matches the checksum of
the destination file. In the rare event that checksums don't match,
gcloud storage deletes the invalid copy and prints a warning message. For more
information, see checksum validation.
You can use gcloud storage to get the checksum of an object in a bucket. For
example, suppose you copy a Landsat public data
object to your working bucket with:
gcloud storage cp gs://gcp-public-data-landsat/LC08/01/001/003/LC08_L1GT_001003_20140812_20170420_01_T2/LC08_L1GT_001003_20140812_20170420_01_T2_B3.TIF gs://example-bucket
Now, you can get the checksums of both the public bucket version of the file and your version of the file in your bucket to ensure they match:
gcloud storage objects describe gs://example-bucket/LC08_L1GT_001003_20140812_20170420_01_T2_B3.TIF
gcloud storage objects describe gs://gcp-public-data-landsat/LC08/01/001/003/LC08_L1GT_001003_20140812_20170420_01_T2/LC08_L1GT_001003_20140812_20170420_01_T2_B3.TIF
You can also use gcloud storage to calculate the checksum of a local file. For
example, suppose your data is in a file at a local data center and you copied it
into Cloud Storage. You can use gcloud storage hash
to get the checksum of your local file and then compare that with the checksum
of the file you copied to a bucket. To get the checksum of a local file use:
gcloud storage hash local-file
MD5 values
For non-composite objects, running gcloud storage objects describe on an
object in a bucket returns output like the following:
bucket: example-bucket contentType: text/plain crc32c: FTiauw== customTime: '1970-01-01T00:00:00+00:00' etag: CPjo7ILqxsQCEAE= generation: '1629833823159214' id: example-bucket/100MBfile.txt/1629833823159214 kind: storage#object md5Hash: daHmCObxxQdY9P7lp9jj0A== ...
Running gcloud storage hash on a local file returns output like the following:
--- crc32c_hash: IJfuvg== digest_format: base64 md5_hash: +bqpwgYMTRn0kWmp5HXRMw== url: file.txt
Both outputs have a CRC32c and MD5 value. There is no MD5 value for composite objects, such as those created from parallel composite uploads.