Google Cloud Compute V1 API - Class Google::Cloud::Compute::V1::AccessConfig (v2.6.0)

Reference documentation and code samples for the Google Cloud Compute V1 API class Google::Cloud::Compute::V1::AccessConfig.

An access configuration attached to an instance's network interface. Only one access config per instance is supported.

Inherits

  • Object

Extended By

  • Google::Protobuf::MessageExts::ClassMethods

Includes

  • Google::Protobuf::MessageExts

Methods

#external_ipv6

def external_ipv6() -> ::String
Returns
  • (::String) — Applies to ipv6AccessConfigs only. The first IPv6 address of the external IPv6 range associated with this instance, prefix length is stored in externalIpv6PrefixLength in ipv6AccessConfig. To use a static external IP address, it must be unused and in the same region as the instance's zone. If not specified, Google Cloud will automatically assign an external IPv6 address from the instance's subnetwork.

#external_ipv6=

def external_ipv6=(value) -> ::String
Parameter
  • value (::String) — Applies to ipv6AccessConfigs only. The first IPv6 address of the external IPv6 range associated with this instance, prefix length is stored in externalIpv6PrefixLength in ipv6AccessConfig. To use a static external IP address, it must be unused and in the same region as the instance's zone. If not specified, Google Cloud will automatically assign an external IPv6 address from the instance's subnetwork.
Returns
  • (::String) — Applies to ipv6AccessConfigs only. The first IPv6 address of the external IPv6 range associated with this instance, prefix length is stored in externalIpv6PrefixLength in ipv6AccessConfig. To use a static external IP address, it must be unused and in the same region as the instance's zone. If not specified, Google Cloud will automatically assign an external IPv6 address from the instance's subnetwork.

#external_ipv6_prefix_length

def external_ipv6_prefix_length() -> ::Integer
Returns
  • (::Integer) — Applies to ipv6AccessConfigs only. The prefix length of the external IPv6 range.

#external_ipv6_prefix_length=

def external_ipv6_prefix_length=(value) -> ::Integer
Parameter
  • value (::Integer) — Applies to ipv6AccessConfigs only. The prefix length of the external IPv6 range.
Returns
  • (::Integer) — Applies to ipv6AccessConfigs only. The prefix length of the external IPv6 range.

#kind

def kind() -> ::String
Returns
  • (::String) — [Output Only] Type of the resource. Always compute#accessConfig for access configs.

#kind=

def kind=(value) -> ::String
Parameter
  • value (::String) — [Output Only] Type of the resource. Always compute#accessConfig for access configs.
Returns
  • (::String) — [Output Only] Type of the resource. Always compute#accessConfig for access configs.

#name

def name() -> ::String
Returns
  • (::String) — The name of this access configuration. In accessConfigs (IPv4), the default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access. In ipv6AccessConfigs, the recommend name is External IPv6.

#name=

def name=(value) -> ::String
Parameter
  • value (::String) — The name of this access configuration. In accessConfigs (IPv4), the default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access. In ipv6AccessConfigs, the recommend name is External IPv6.
Returns
  • (::String) — The name of this access configuration. In accessConfigs (IPv4), the default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access. In ipv6AccessConfigs, the recommend name is External IPv6.

#nat_i_p

def nat_i_p() -> ::String
Returns
  • (::String) — Applies to accessConfigs (IPv4) only. An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.

#nat_i_p=

def nat_i_p=(value) -> ::String
Parameter
  • value (::String) — Applies to accessConfigs (IPv4) only. An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
Returns
  • (::String) — Applies to accessConfigs (IPv4) only. An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.

#network_tier

def network_tier() -> ::String
Returns
  • (::String) — This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD. If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier. If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP. Check the NetworkTier enum for the list of possible values.

#network_tier=

def network_tier=(value) -> ::String
Parameter
  • value (::String) — This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD. If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier. If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP. Check the NetworkTier enum for the list of possible values.
Returns
  • (::String) — This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD. If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier. If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP. Check the NetworkTier enum for the list of possible values.

#public_ptr_domain_name

def public_ptr_domain_name() -> ::String
Returns
  • (::String) — The DNS domain name for the public PTR record. You can set this field only if the setPublicPtr field is enabled in accessConfig. If this field is unspecified in ipv6AccessConfig, a default PTR record will be createc for first IP in associated external IPv6 range.

#public_ptr_domain_name=

def public_ptr_domain_name=(value) -> ::String
Parameter
  • value (::String) — The DNS domain name for the public PTR record. You can set this field only if the setPublicPtr field is enabled in accessConfig. If this field is unspecified in ipv6AccessConfig, a default PTR record will be createc for first IP in associated external IPv6 range.
Returns
  • (::String) — The DNS domain name for the public PTR record. You can set this field only if the setPublicPtr field is enabled in accessConfig. If this field is unspecified in ipv6AccessConfig, a default PTR record will be createc for first IP in associated external IPv6 range.

#security_policy

def security_policy() -> ::String
Returns
  • (::String) — [Output Only] The resource URL for the security policy associated with this access config.

#security_policy=

def security_policy=(value) -> ::String
Parameter
  • value (::String) — [Output Only] The resource URL for the security policy associated with this access config.
Returns
  • (::String) — [Output Only] The resource URL for the security policy associated with this access config.

#set_public_ptr

def set_public_ptr() -> ::Boolean
Returns
  • (::Boolean) — Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name. This field is not used in ipv6AccessConfig. A default PTR record will be created if the VM has external IPv6 range associated.

#set_public_ptr=

def set_public_ptr=(value) -> ::Boolean
Parameter
  • value (::Boolean) — Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name. This field is not used in ipv6AccessConfig. A default PTR record will be created if the VM has external IPv6 range associated.
Returns
  • (::Boolean) — Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name. This field is not used in ipv6AccessConfig. A default PTR record will be created if the VM has external IPv6 range associated.

#type

def type() -> ::String
Returns
  • (::String) — The type of configuration. In accessConfigs (IPv4), the default and only option is ONE_TO_ONE_NAT. In ipv6AccessConfigs, the default and only option is DIRECT_IPV6. Check the Type enum for the list of possible values.

#type=

def type=(value) -> ::String
Parameter
  • value (::String) — The type of configuration. In accessConfigs (IPv4), the default and only option is ONE_TO_ONE_NAT. In ipv6AccessConfigs, the default and only option is DIRECT_IPV6. Check the Type enum for the list of possible values.
Returns
  • (::String) — The type of configuration. In accessConfigs (IPv4), the default and only option is ONE_TO_ONE_NAT. In ipv6AccessConfigs, the default and only option is DIRECT_IPV6. Check the Type enum for the list of possible values.