Google Cloud Storage Transfer V1 Client - Class Schedule (1.1.1)

Reference documentation and code samples for the Google Cloud Storage Transfer V1 Client class Schedule.

Transfers can be scheduled to recur or to run just once.

Generated from protobuf message google.storagetransfer.v1.Schedule

Namespace

Google \ Cloud \ StorageTransfer \ V1

Methods

__construct

Constructor.

Parameters
NameDescription
data array

Optional. Data for populating the Message object.

↳ schedule_start_date Google\Type\Date

Required. The start date of a transfer. Date boundaries are determined relative to UTC time. If schedule_start_date and start_time_of_day are in the past relative to the job's creation time, the transfer starts the day after you schedule the transfer request. Note: When starting jobs at or near midnight UTC it is possible that a job starts later than expected. For example, if you send an outbound request on June 1 one millisecond prior to midnight UTC and the Storage Transfer Service server receives the request on June 2, then it creates a TransferJob with schedule_start_date set to June 2 and a start_time_of_day set to midnight UTC. The first scheduled TransferOperation takes place on June 3 at midnight UTC.

↳ schedule_end_date Google\Type\Date

The last day a transfer runs. Date boundaries are determined relative to UTC time. A job runs once per 24 hours within the following guidelines: * If schedule_end_date and schedule_start_date are the same and in the future relative to UTC, the transfer is executed only one time. * If schedule_end_date is later than schedule_start_date and schedule_end_date is in the future relative to UTC, the job runs each day at start_time_of_day through schedule_end_date.

↳ start_time_of_day Google\Type\TimeOfDay

The time in UTC that a transfer job is scheduled to run. Transfers may start later than this time. If start_time_of_day is not specified: * One-time transfers run immediately. * Recurring transfers run immediately, and each day at midnight UTC, through schedule_end_date. If start_time_of_day is specified: * One-time transfers run at the specified time. * Recurring transfers run at the specified time each day, through schedule_end_date.

↳ end_time_of_day Google\Type\TimeOfDay

The time in UTC that no further transfer operations are scheduled. Combined with schedule_end_date, end_time_of_day specifies the end date and time for starting new transfer operations. This field must be greater than or equal to the timestamp corresponding to the combintation of schedule_start_date and start_time_of_day, and is subject to the following: * If end_time_of_day is not set and schedule_end_date is set, then a default value of 23:59:59 is used for end_time_of_day. * If end_time_of_day is set and schedule_end_date is not set, then INVALID_ARGUMENT is returned.

↳ repeat_interval Google\Protobuf\Duration

Interval between the start of each scheduled TransferOperation. If unspecified, the default value is 24 hours. This value may not be less than 1 hour.

getScheduleStartDate

Required. The start date of a transfer. Date boundaries are determined relative to UTC time. If schedule_start_date and start_time_of_day are in the past relative to the job's creation time, the transfer starts the day after you schedule the transfer request.

Note: When starting jobs at or near midnight UTC it is possible that a job starts later than expected. For example, if you send an outbound request on June 1 one millisecond prior to midnight UTC and the Storage Transfer Service server receives the request on June 2, then it creates a TransferJob with schedule_start_date set to June 2 and a start_time_of_day set to midnight UTC. The first scheduled TransferOperation takes place on June 3 at midnight UTC.

Returns
TypeDescription
Google\Type\Date|null

hasScheduleStartDate

clearScheduleStartDate

setScheduleStartDate

Required. The start date of a transfer. Date boundaries are determined relative to UTC time. If schedule_start_date and start_time_of_day are in the past relative to the job's creation time, the transfer starts the day after you schedule the transfer request.

Note: When starting jobs at or near midnight UTC it is possible that a job starts later than expected. For example, if you send an outbound request on June 1 one millisecond prior to midnight UTC and the Storage Transfer Service server receives the request on June 2, then it creates a TransferJob with schedule_start_date set to June 2 and a start_time_of_day set to midnight UTC. The first scheduled TransferOperation takes place on June 3 at midnight UTC.

Parameter
NameDescription
var Google\Type\Date
Returns
TypeDescription
$this

getScheduleEndDate

The last day a transfer runs. Date boundaries are determined relative to UTC time. A job runs once per 24 hours within the following guidelines:

  • If schedule_end_date and schedule_start_date are the same and in the future relative to UTC, the transfer is executed only one time.

  • If schedule_end_date is later than schedule_start_date and schedule_end_date is in the future relative to UTC, the job runs each day at start_time_of_day through schedule_end_date.

Returns
TypeDescription
Google\Type\Date|null

hasScheduleEndDate

clearScheduleEndDate

setScheduleEndDate

The last day a transfer runs. Date boundaries are determined relative to UTC time. A job runs once per 24 hours within the following guidelines:

  • If schedule_end_date and schedule_start_date are the same and in the future relative to UTC, the transfer is executed only one time.

  • If schedule_end_date is later than schedule_start_date and schedule_end_date is in the future relative to UTC, the job runs each day at start_time_of_day through schedule_end_date.

Parameter
NameDescription
var Google\Type\Date
Returns
TypeDescription
$this

getStartTimeOfDay

The time in UTC that a transfer job is scheduled to run. Transfers may start later than this time.

If start_time_of_day is not specified:

  • One-time transfers run immediately.
  • Recurring transfers run immediately, and each day at midnight UTC, through schedule_end_date. If start_time_of_day is specified:
  • One-time transfers run at the specified time.
  • Recurring transfers run at the specified time each day, through schedule_end_date.
Returns
TypeDescription
Google\Type\TimeOfDay|null

hasStartTimeOfDay

clearStartTimeOfDay

setStartTimeOfDay

The time in UTC that a transfer job is scheduled to run. Transfers may start later than this time.

If start_time_of_day is not specified:

  • One-time transfers run immediately.
  • Recurring transfers run immediately, and each day at midnight UTC, through schedule_end_date. If start_time_of_day is specified:
  • One-time transfers run at the specified time.
  • Recurring transfers run at the specified time each day, through schedule_end_date.
Parameter
NameDescription
var Google\Type\TimeOfDay
Returns
TypeDescription
$this

getEndTimeOfDay

The time in UTC that no further transfer operations are scheduled. Combined with schedule_end_date, end_time_of_day specifies the end date and time for starting new transfer operations. This field must be greater than or equal to the timestamp corresponding to the combintation of schedule_start_date and start_time_of_day, and is subject to the following:

  • If end_time_of_day is not set and schedule_end_date is set, then a default value of 23:59:59 is used for end_time_of_day.

  • If end_time_of_day is set and schedule_end_date is not set, then INVALID_ARGUMENT is returned.

Returns
TypeDescription
Google\Type\TimeOfDay|null

hasEndTimeOfDay

clearEndTimeOfDay

setEndTimeOfDay

The time in UTC that no further transfer operations are scheduled. Combined with schedule_end_date, end_time_of_day specifies the end date and time for starting new transfer operations. This field must be greater than or equal to the timestamp corresponding to the combintation of schedule_start_date and start_time_of_day, and is subject to the following:

  • If end_time_of_day is not set and schedule_end_date is set, then a default value of 23:59:59 is used for end_time_of_day.

  • If end_time_of_day is set and schedule_end_date is not set, then INVALID_ARGUMENT is returned.

Parameter
NameDescription
var Google\Type\TimeOfDay
Returns
TypeDescription
$this

getRepeatInterval

Interval between the start of each scheduled TransferOperation. If unspecified, the default value is 24 hours. This value may not be less than 1 hour.

Returns
TypeDescription
Google\Protobuf\Duration|null

hasRepeatInterval

clearRepeatInterval

setRepeatInterval

Interval between the start of each scheduled TransferOperation. If unspecified, the default value is 24 hours. This value may not be less than 1 hour.

Parameter
NameDescription
var Google\Protobuf\Duration
Returns
TypeDescription
$this