Compute V1 Client - Class AccessConfig (1.8.3)

Reference documentation and code samples for the Compute V1 Client class AccessConfig.

An access configuration attached to an instance's network interface. Only one access config per instance is supported.

Generated from protobuf message google.cloud.compute.v1.AccessConfig

Methods

__construct

Constructor.

Parameters
NameDescription
data array

Optional. Data for populating the Message object.

↳ external_ipv6 string

The first IPv6 address of the external IPv6 range associated with this instance, prefix length is stored in externalIpv6PrefixLength in ipv6AccessConfig. To use a static external IP address, it must be unused and in the same region as the instance's zone. If not specified, Google Cloud will automatically assign an external IPv6 address from the instance's subnetwork.

↳ external_ipv6_prefix_length int

The prefix length of the external IPv6 range.

↳ kind string

[Output Only] Type of the resource. Always compute#accessConfig for access configs.

↳ name string

The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.

↳ nat_i_p string

An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.

↳ network_tier string

This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD. If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier. If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP. Check the NetworkTier enum for the list of possible values.

↳ public_ptr_domain_name string

The DNS domain name for the public PTR record. You can set this field only if the setPublicPtr field is enabled in accessConfig. If this field is unspecified in ipv6AccessConfig, a default PTR record will be createc for first IP in associated external IPv6 range.

↳ set_public_ptr bool

Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name. This field is not used in ipv6AccessConfig. A default PTR record will be created if the VM has external IPv6 range associated.

↳ type string

The type of configuration. The default and only option is ONE_TO_ONE_NAT. Check the Type enum for the list of possible values.

getExternalIpv6

The first IPv6 address of the external IPv6 range associated with this instance, prefix length is stored in externalIpv6PrefixLength in ipv6AccessConfig. To use a static external IP address, it must be unused and in the same region as the instance's zone. If not specified, Google Cloud will automatically assign an external IPv6 address from the instance's subnetwork.

Returns
TypeDescription
string

hasExternalIpv6

clearExternalIpv6

setExternalIpv6

The first IPv6 address of the external IPv6 range associated with this instance, prefix length is stored in externalIpv6PrefixLength in ipv6AccessConfig. To use a static external IP address, it must be unused and in the same region as the instance's zone. If not specified, Google Cloud will automatically assign an external IPv6 address from the instance's subnetwork.

Parameter
NameDescription
var string
Returns
TypeDescription
$this

getExternalIpv6PrefixLength

The prefix length of the external IPv6 range.

Returns
TypeDescription
int

hasExternalIpv6PrefixLength

clearExternalIpv6PrefixLength

setExternalIpv6PrefixLength

The prefix length of the external IPv6 range.

Parameter
NameDescription
var int
Returns
TypeDescription
$this

getKind

[Output Only] Type of the resource. Always compute#accessConfig for access configs.

Returns
TypeDescription
string

hasKind

clearKind

setKind

[Output Only] Type of the resource. Always compute#accessConfig for access configs.

Parameter
NameDescription
var string
Returns
TypeDescription
$this

getName

The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.

Returns
TypeDescription
string

hasName

clearName

setName

The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.

Parameter
NameDescription
var string
Returns
TypeDescription
$this

getNatIP

An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.

Returns
TypeDescription
string

hasNatIP

clearNatIP

setNatIP

An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.

Parameter
NameDescription
var string
Returns
TypeDescription
$this

getNetworkTier

This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD. If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier. If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.

Check the NetworkTier enum for the list of possible values.

Returns
TypeDescription
string

hasNetworkTier

clearNetworkTier

setNetworkTier

This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD. If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier. If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.

Check the NetworkTier enum for the list of possible values.

Parameter
NameDescription
var string
Returns
TypeDescription
$this

getPublicPtrDomainName

The DNS domain name for the public PTR record. You can set this field only if the setPublicPtr field is enabled in accessConfig. If this field is unspecified in ipv6AccessConfig, a default PTR record will be createc for first IP in associated external IPv6 range.

Returns
TypeDescription
string

hasPublicPtrDomainName

clearPublicPtrDomainName

setPublicPtrDomainName

The DNS domain name for the public PTR record. You can set this field only if the setPublicPtr field is enabled in accessConfig. If this field is unspecified in ipv6AccessConfig, a default PTR record will be createc for first IP in associated external IPv6 range.

Parameter
NameDescription
var string
Returns
TypeDescription
$this

getSetPublicPtr

Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name. This field is not used in ipv6AccessConfig. A default PTR record will be created if the VM has external IPv6 range associated.

Returns
TypeDescription
bool

hasSetPublicPtr

clearSetPublicPtr

setSetPublicPtr

Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name. This field is not used in ipv6AccessConfig. A default PTR record will be created if the VM has external IPv6 range associated.

Parameter
NameDescription
var bool
Returns
TypeDescription
$this

getType

The type of configuration. The default and only option is ONE_TO_ONE_NAT.

Check the Type enum for the list of possible values.

Returns
TypeDescription
string

hasType

clearType

setType

The type of configuration. The default and only option is ONE_TO_ONE_NAT.

Check the Type enum for the list of possible values.

Parameter
NameDescription
var string
Returns
TypeDescription
$this