Reference documentation and code samples for the Compute V1 Client class RouterNat.
Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.
Generated from protobuf message google.cloud.compute.v1.RouterNat
Namespace
Google \ Cloud \ Compute \ V1Methods
__construct
Constructor.
| Parameters | |
|---|---|
| Name | Description |
data |
array
Optional. Data for populating the Message object. |
↳ drain_nat_ips |
array
A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only. |
↳ enable_dynamic_port_allocation |
bool
Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config. |
↳ enable_endpoint_independent_mapping |
bool
|
↳ endpoint_types |
array
List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM Check the EndpointTypes enum for the list of possible values. |
↳ icmp_idle_timeout_sec |
int
Timeout (in seconds) for ICMP connections. Defaults to 30s if not set. |
↳ log_config |
Google\Cloud\Compute\V1\RouterNatLogConfig
Configure logging on this NAT. |
↳ max_ports_per_vm |
int
Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config. |
↳ min_ports_per_vm |
int
Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM. |
↳ name |
string
Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035. |
↳ nat_ip_allocate_option |
string
Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty. Check the NatIpAllocateOption enum for the list of possible values. |
↳ nat_ips |
array
A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project. |
↳ rules |
array<Google\Cloud\Compute\V1\RouterNatRule>
A list of rules associated with this NAT. |
↳ source_subnetwork_ip_ranges_to_nat |
string
Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region. Check the SourceSubnetworkIpRangesToNat enum for the list of possible values. |
↳ subnetworks |
array<Google\Cloud\Compute\V1\RouterNatSubnetworkToNat>
A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above. |
↳ tcp_established_idle_timeout_sec |
int
Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set. |
↳ tcp_time_wait_timeout_sec |
int
Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set. |
↳ tcp_transitory_idle_timeout_sec |
int
Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set. |
↳ udp_idle_timeout_sec |
int
Timeout (in seconds) for UDP connections. Defaults to 30s if not set. |
getDrainNatIps
A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
| Returns | |
|---|---|
| Type | Description |
Google\Protobuf\Internal\RepeatedField | |
setDrainNatIps
A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
| Parameter | |
|---|---|
| Name | Description |
var |
string[]
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getEnableDynamicPortAllocation
Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
| Returns | |
|---|---|
| Type | Description |
bool | |
hasEnableDynamicPortAllocation
clearEnableDynamicPortAllocation
setEnableDynamicPortAllocation
Enable Dynamic Port Allocation. If not specified, it is disabled by default. If set to true, - Dynamic Port Allocation will be enabled on this NAT config. - enableEndpointIndependentMapping cannot be set to true. - If minPorts is set, minPortsPerVm must be set to a power of two greater than or equal to 32. If minPortsPerVm is not set, a minimum of 32 ports will be allocated to a VM from this NAT config.
| Parameter | |
|---|---|
| Name | Description |
var |
bool
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getEnableEndpointIndependentMapping
Generated from protobuf field optional bool enable_endpoint_independent_mapping = 259441819;
| Returns | |
|---|---|
| Type | Description |
bool | |
hasEnableEndpointIndependentMapping
clearEnableEndpointIndependentMapping
setEnableEndpointIndependentMapping
Generated from protobuf field optional bool enable_endpoint_independent_mapping = 259441819;
| Parameter | |
|---|---|
| Name | Description |
var |
bool
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getEndpointTypes
List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM Check the EndpointTypes enum for the list of possible values.
| Returns | |
|---|---|
| Type | Description |
Google\Protobuf\Internal\RepeatedField | |
setEndpointTypes
List of NAT-ted endpoint types supported by the Nat Gateway. If the list is empty, then it will be equivalent to include ENDPOINT_TYPE_VM Check the EndpointTypes enum for the list of possible values.
| Parameter | |
|---|---|
| Name | Description |
var |
string[]
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getIcmpIdleTimeoutSec
Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
| Returns | |
|---|---|
| Type | Description |
int | |
hasIcmpIdleTimeoutSec
clearIcmpIdleTimeoutSec
setIcmpIdleTimeoutSec
Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getLogConfig
Configure logging on this NAT.
| Returns | |
|---|---|
| Type | Description |
Google\Cloud\Compute\V1\RouterNatLogConfig|null | |
hasLogConfig
clearLogConfig
setLogConfig
Configure logging on this NAT.
| Parameter | |
|---|---|
| Name | Description |
var |
Google\Cloud\Compute\V1\RouterNatLogConfig
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getMaxPortsPerVm
Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
| Returns | |
|---|---|
| Type | Description |
int | |
hasMaxPortsPerVm
clearMaxPortsPerVm
setMaxPortsPerVm
Maximum number of ports allocated to a VM from this NAT config when Dynamic Port Allocation is enabled. If Dynamic Port Allocation is not enabled, this field has no effect. If Dynamic Port Allocation is enabled, and this field is set, it must be set to a power of two greater than minPortsPerVm, or 64 if minPortsPerVm is not set. If Dynamic Port Allocation is enabled and this field is not set, a maximum of 65536 ports will be allocated to a VM from this NAT config.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getMinPortsPerVm
Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
| Returns | |
|---|---|
| Type | Description |
int | |
hasMinPortsPerVm
clearMinPortsPerVm
setMinPortsPerVm
Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getName
Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
| Returns | |
|---|---|
| Type | Description |
string | |
hasName
clearName
setName
Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
| Parameter | |
|---|---|
| Name | Description |
var |
string
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getNatIpAllocateOption
Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
Check the NatIpAllocateOption enum for the list of possible values.
| Returns | |
|---|---|
| Type | Description |
string | |
hasNatIpAllocateOption
clearNatIpAllocateOption
setNatIpAllocateOption
Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty.
Check the NatIpAllocateOption enum for the list of possible values.
| Parameter | |
|---|---|
| Name | Description |
var |
string
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getNatIps
A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
| Returns | |
|---|---|
| Type | Description |
Google\Protobuf\Internal\RepeatedField | |
setNatIps
A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
| Parameter | |
|---|---|
| Name | Description |
var |
string[]
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getRules
A list of rules associated with this NAT.
| Returns | |
|---|---|
| Type | Description |
Google\Protobuf\Internal\RepeatedField | |
setRules
A list of rules associated with this NAT.
| Parameter | |
|---|---|
| Name | Description |
var |
array<Google\Cloud\Compute\V1\RouterNatRule>
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getSourceSubnetworkIpRangesToNat
Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
Check the SourceSubnetworkIpRangesToNat enum for the list of possible values.
| Returns | |
|---|---|
| Type | Description |
string | |
hasSourceSubnetworkIpRangesToNat
clearSourceSubnetworkIpRangesToNat
setSourceSubnetworkIpRangesToNat
Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES then there should not be any other Router.Nat section in any Router for this network in this region.
Check the SourceSubnetworkIpRangesToNat enum for the list of possible values.
| Parameter | |
|---|---|
| Name | Description |
var |
string
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getSubnetworks
A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
| Returns | |
|---|---|
| Type | Description |
Google\Protobuf\Internal\RepeatedField | |
setSubnetworks
A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
| Parameter | |
|---|---|
| Name | Description |
var |
array<Google\Cloud\Compute\V1\RouterNatSubnetworkToNat>
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getTcpEstablishedIdleTimeoutSec
Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
| Returns | |
|---|---|
| Type | Description |
int | |
hasTcpEstablishedIdleTimeoutSec
clearTcpEstablishedIdleTimeoutSec
setTcpEstablishedIdleTimeoutSec
Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getTcpTimeWaitTimeoutSec
Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
| Returns | |
|---|---|
| Type | Description |
int | |
hasTcpTimeWaitTimeoutSec
clearTcpTimeWaitTimeoutSec
setTcpTimeWaitTimeoutSec
Timeout (in seconds) for TCP connections that are in TIME_WAIT state. Defaults to 120s if not set.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getTcpTransitoryIdleTimeoutSec
Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
| Returns | |
|---|---|
| Type | Description |
int | |
hasTcpTransitoryIdleTimeoutSec
clearTcpTransitoryIdleTimeoutSec
setTcpTransitoryIdleTimeoutSec
Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |
getUdpIdleTimeoutSec
Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
| Returns | |
|---|---|
| Type | Description |
int | |
hasUdpIdleTimeoutSec
clearUdpIdleTimeoutSec
setUdpIdleTimeoutSec
Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
| Parameter | |
|---|---|
| Name | Description |
var |
int
|
| Returns | |
|---|---|
| Type | Description |
$this | |