Mantenha tudo organizado com as coleções
Salve e categorize o conteúdo com base nas suas preferências.
Criar uma instância do Memorystore para Memcached usando o console Google Cloud
Neste guia de início rápido, você verá as etapas para criar uma instância do Memorystore para Memcached, conectar-se à instância, definir um valor, recuperar um valor e excluir a instância.
Antes de começar
Sign in to your Google Cloud account. If you're new to
Google Cloud,
create an account to evaluate how our products perform in
real-world scenarios. New customers also get $300 in free credits to
run, test, and deploy workloads.
In the Google Cloud console, on the project selector page,
select or create a Google Cloud project.
Selecione as configurações da nova instância na página Criar uma instância do Memcached no Google Cloud console:
Insira um código de instância usando apenas letras minúsculas, números e hifens.
Comece com uma letra.
Por exemplo, my-memcached-instance-1.
Escolha us-central1 na lista suspensa Região.
Escolha Automatically distribute na lista suspensa Zona.
Digite 2 em Nós para criar dois nós.
Escolha 1 GB de memória por nó.
Escolha um para Núcleos por nó.
Selecione default para a rede autorizada.
Clique em Criar
Depois que a instância for criada, clique no código dela para visualizar a página de detalhes da instância.
Anote o IP address de um dos nós.
Como se conectar à instância a partir de uma VM do Compute Engine
Para testar a conexão:
Conecte-se a uma VM do Linux. Para conhecer as etapas de conexão com uma VM do Linux, consulte o Guia de início rápido sobre como usar uma VM do Linux.
Se você usou uma imagem baseada em Debian para criar sua instância de VM, conforme descrito no guia de início rápido, instale telnet usando apt-get:
sudo apt-get install telnet
Do terminal, faça o telnet para o endereço IP de um dos nós do Memcached.
Substitua node-ip-address pelo endereço IP do nó.
telnet node-ip-address 11211
Você verá a seguinte saída com a variável [bracketed-variables] substituída pelo projeto:
Trying [node-ip-address]…
Connected to [node-ip-address]
Na sessão de telnet, digite alguns comandos do Memcached:
Insira:
get greeting
Resultado:
END
Insira o seguinte:
set greeting 1 0 11
hello world
Resultado:
STORED
Insira o seguinte:
get greeting
Resultado:
VALUE greeting 1 11
hello world
END
O Memorystore para Memcached é compatível com bibliotecas padrão do Memcached de código aberto.
Limpar
Para evitar cobranças na sua conta do Google Cloud pelos
recursos usados nesta página, siga estas etapas.
[[["Fácil de entender","easyToUnderstand","thumb-up"],["Meu problema foi resolvido","solvedMyProblem","thumb-up"],["Outro","otherUp","thumb-up"]],[["Difícil de entender","hardToUnderstand","thumb-down"],["Informações incorretas ou exemplo de código","incorrectInformationOrSampleCode","thumb-down"],["Não contém as informações/amostras de que eu preciso","missingTheInformationSamplesINeed","thumb-down"],["Problema na tradução","translationIssue","thumb-down"],["Outro","otherDown","thumb-down"]],["Última atualização 2025-08-19 UTC."],[],[],null,["# Quickstart: Create a Memorystore for Memcached instance by using the Google Cloud console\n\nCreate a Memorystore for Memcached instance by using the Google Cloud console\n=============================================================================\n\nThis quickstart walks you through the steps to create a Memorystore for Memcached\ninstance, connect to the instance, set a value, retrieve a value, and delete the\ninstance.\n| **Caution:** You cannot create a Memorystore for Memcached instance without first having a private services access connection established. See [Networking](/memorystore/docs/memcached/networking) for details on the private services access connection that is required for Memorystore for Memcached.\n\nBefore you begin\n----------------\n\n- Sign in to your Google Cloud account. If you're new to Google Cloud, [create an account](https://console.cloud.google.com/freetrial) to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.\n- In the Google Cloud console, on the project selector page,\n select or create a Google Cloud project.\n\n | **Note**: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.\n\n [Go to project selector](https://console.cloud.google.com/projectselector2/home/dashboard)\n-\n [Verify that billing is enabled for your Google Cloud project](/billing/docs/how-to/verify-billing-enabled#confirm_billing_is_enabled_on_a_project).\n\n- In the Google Cloud console, on the project selector page,\n select or create a Google Cloud project.\n\n | **Note**: If you don't plan to keep the resources that you create in this procedure, create a project instead of selecting an existing project. After you finish these steps, you can delete the project, removing all resources associated with the project.\n\n [Go to project selector](https://console.cloud.google.com/projectselector2/home/dashboard)\n-\n [Verify that billing is enabled for your Google Cloud project](/billing/docs/how-to/verify-billing-enabled#confirm_billing_is_enabled_on_a_project).\n\n1. Enable the Service Networking API for your project. \n [Enable the Service Networking API](https://console.cloud.google.com/apis/library/servicenetworking.googleapis.com)\n2. Enable the Memorystore for Memcached API for your project. \n [Enable the Memorystore for Memcached API](https://console.cloud.google.com/apis/api/memcache.googleapis.com)\n\n\u003cbr /\u003e\n\nCreating a Memcached instance\n-----------------------------\n\n1. Go to the Memorystore for Memcached page in the Google Cloud console.\n\n [Memorystore for Memcached](https://console.cloud.google.com/memorystore/memcached/instances) \n\n2. Click the **Create Instance** button.\n\n3. Select the configurations for your new instance on the **Create a Memcached\n instance** page in the Google Cloud console:\n\n - Enter an instance ID using only lowercase letters, numbers, and hyphens. Start with a letter.\n - For example, `my-memcached-instance-1`.\n - Choose `us-central1` from the **Region** dropdown.\n - Choose `Automatically distribute` from the **Zone** dropdown.\n - Enter `2` under **Nodes** to create two nodes.\n - Choose 1 GB of **Memory per node**.\n - Choose 1 for **Cores per node**.\n - Select `default` for the **Authorized network**.\n\n | **Note:** If you see the **Private service connection required** panel, you need to [establish a private services access connection](/memorystore/docs/memcached/establishing-connection).\n4. Click **Create**.\n\n5. After the instance is created, click the instance ID to view the instance\n details page.\n\n6. Write down the `IP address` of one of your nodes.\n\nConnecting to your instance from a Compute Engine VM\n----------------------------------------------------\n\n| **Note:** To connect to a Memcached instance, your client VM must be located in the same region, and must be connected to the same network, as your instance.\n\nTo test the connection:\n\n1. Connect to a Linux VM. For steps to connect to a Linux VM, see [Quickstart Using a Linux VM](/compute/docs/create-linux-vm-instance).\n If you used a Debian based image to create your VM instance as described in the\n quickstart, install `telnet` using `apt-get`:\n\n sudo apt-get install telnet\n\n2. From the terminal, telnet to the IP address of one of the Memcached nodes.\n Replace \u003cvar translate=\"no\"\u003enode-ip-address\u003c/var\u003e with the IP address of your node.\n\n ```\n telnet node-ip-address 11211\n ```\n\n You should see the following output with the `[bracketed-variables]` replaced\n your project's variables: \n\n ```\n Trying [node-ip-address]…\n Connected to [node-ip-address]\n ```\n3. In the telnet session, enter some Memcached commands:\n\n Enter: \n\n ```\n get greeting\n ```\n\n Result: \n\n ```\n END\n ```\n\n Enter: \n\n ```\n set greeting 1 0 11\n hello world\n ```\n\n Result: \n\n ```\n STORED\n ```\n\n Enter: \n\n ```\n get greeting\n ```\n\n Result: \n\n ```\n VALUE greeting 1 11\n hello world\n END\n ```\n\nMemorystore for Memcached supports standard open source Memcached libraries.\n\nClean up\n--------\n\n\nTo avoid incurring charges to your Google Cloud account for\nthe resources used on this page, follow these steps.\n\n1. Go to the Memorystore for Memcached page in the Google Cloud console.\n\n [Memorystore for Memcached](https://console.cloud.google.com/memorystore/memcached/instances) \n\n2. Click the ID of the instance you want to delete.\n\n3. Click the **Delete** button.\n\n4. In the prompt that appears, enter the instance's ID.\n\n5. Click the **Delete** button.\n\nWhat's next\n-----------\n\n- [Connect to a Memcached instance](/memorystore/docs/memcached/connecting-memcached-instance).\n\n- [Use the Auto Discovery service](/memorystore/docs/memcached/using-auto-discovery).\n\n- [Monitor your Memcached instance](/memorystore/docs/memcached/monitoring-instances)."]]
